Bug Reports - Automobilista 2 (Read the Opening Post)

Track & Layout Used: Any
Car Used: Superkart
Applicable Settings:
Version: 1.1.1.0.
Superkart only has one working brake, the rear left, despite visibly having discs and calipers on the front. Presumably both front brakes and one rear brake should work.
Brake ballance is available and adjustable in setup but if put all the to front results in zero brakes.
The kart incredibly hard to slow down as is.

 

Track & Layout Used: Any
Car Used: McLaren F1 LM
Applicable Settings:
Version: 1.1.1.0.
No interior dash light illuminate when headlight turned on. Guages very hard to see at night. No way of knowing if your headlights are on or not.
Pretty sure the problem exists in other cars also.

 

Track & Layout Used: Any
Car Used: Porsche GT3, any livery
Applicable Settings: TC, ABS and differential settings
Report: TC, ABS and differential settings not applied for this particular car
Steps to reproduce/other details:
Setup appears to be broken for Porsche GT3 car on main build. Tested with TC, ABS and differential settings only. Changing the values works OK (values changes and are modified OK if you exit setup screen and go back to see settings are well applied). However, once you return on the track and go back to pits, values are reverted to default. Values changes are not reflected on the track either, car behaves the same despite any changes to TC, ABS or differential settings.

Problem occurs only with the Porsche GT3 car on main build, whatever track. BETA works just fine for all the mentioned above issues.

MAIN build: 1.1.1.0.1502
BETA build: 1.1.1.0.1500

 

the same thing happened to me last night, first Interlagos and then Kyalami

 

Track & Layout Used: Any
Car Used: Opala79, Opala Old Stockcar
Applicable Settings: Go into the car setup change tires
Version: 1.1.1.0.1499
In the car setup for the "TYRE COMPOUND" there is no description for the tire manually chosen.

 

Track & Layout Used: any
Car Used: any
Applicable Settings: any
Report: Is it possible to delay the start of a race after quali on a dedi server?
Steps to reproduce: n/a

 

Track & Layout Used: any
Car Used: Mini JCW
Applicable Settings: any
Version: 1.1.1.0
Report: Torque too great
Using the onscreen telemetry screen torque peaks around 275lb/ft. According to the blurb on the car selection screen it should be 213.
I investigated because I'd noticed a change in behaviour recently where it was spinning the wheels more than before.

 

Track & Layout Used: Spa
Car Used: any
Applicable Settings: Ultra then Low Track Detail
Report: Track is only showing Ultra Detail - Low also shows ultra detail and kills fps in VR
Steps to reproduce: Switch from Ultra to Low Track detail = No change to track detail

 

Track & Layout Used: Any
Car Used: Ginetta G55 GT4
Applicable Settings: Weather -rain/thunderstorm (probably any)
Report: wipers do not work with any camera setting, nor do assists (even when turned the setting Driving assists allowed: Authentic) traction control or ABS.

 

Track & Layout Used: Oulton Park Int.
Car Used: Caterham 620R
Applicable Settings: Multiplayer, Damage on
Version: 1.1.1.0.1502
Report: Brakes overheat particularly fronts after one lap and never cool down racing and there are no brake ducts to adjust to aid cooling

 

Track & Layout Used: Any
Car Used: karts, superkart
Applicable Settings: Any
Version: 1.1.1.0.1502

Not exactly a bug but, the 180 degrees of rotation (dor) of the karts / superkart, makes them veryyyy twitchy. I assume a ~ 240 - 250 dor would be a better solution here (from the moment we can not even change the steering ratio inside the garage for those cars)

 

just tested the ginetta, and as you said, you can not activate the aids, even if you set "Driving assists allowed: Full"

 

Build: v 1.1.1.0
Track & Layout Used: Any
Car Used: Ginetta GT4
Applicable Settings: Any
Report: race storm : windscreen wippers do not work.

 

Build: v 1.1.1.0
Track & Layout Used: Interlagos
Car Used: V10 Gen2
Applicable Settings: Dry qualifying session. Pit strategy tyres depending on weather.
Report: Pit stop, new tyre visuals are wet (bug) but behaviour is dry.

 

Build: v 1.1.1.0
Track & Layout Used: Imola
Car Used: V10 Gen2
Applicable Settings: Qualifying session
Report: While driving : Pause - Back to pit - Drive. Another car is pitting in front of pit, impossible to leave pit again. Pause/Back to pit/drive again = Its crew has disappeared, but the other car is still there, blocking the exit for all session.

 

Do you drive with activated pit assists or whatever it is called? Cause when you drive yourself in and out of pits, you can go through other cars in pitlane as they are ghosting, no crash possible.

 

Track & Layout Used: Any
Car Used: McLaren MP4/12
Applicable Settings: Hide Arms and Wheels
Version: 1.1.1.0

The wheel doesn't hidden as it should be.

 

Track & Layout Used: Any
Car Used: McLaren MP4/12
Applicable Settings: Manual Auto Start, Auto Clutch and Test Day
Version: 1.1.1.0

When the car starts and I shift in first gear, the car will stall and shut down. That would make sense if I had my settings to manual clutch, but I use auto-clutch since I'm using hand shifters. This also happens with some other cars as well.