1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Bug Reports - Automobilista 2 (Read the Opening Post)

Discussion in 'Automobilista 2 - General Discussion' started by Heitor Facuri Cicoti, Apr 4, 2020.

  1. FrankyRed

    FrankyRed Youtuber

    Joined:
    Aug 28, 2020
    Messages:
    12
    Likes Received:
    2

    It was the Caterham Academy and live track preset is "default progressing"

    The reason the vid shows goiania short is because i recorded it to show Oez but in my playing around today i noticed the same issues on Brands Hatch.

    So the video is about a week old but after the latest update.

    It was Oez who recommended making a backup docs folder which i did but it didn't resolve the issue.
    Another car with the same problem was the Formula trainer (Not advanced)

    Fanatec CSW 2.5
    Fanatec CSL elite pedals with loadcell


    EDIT
    I found a fix for my issue thanks to Azaris and Tarmac terrorist.



    If you set the brake deadzone to 1 or 2 as shown in the video it should fix the issue, It did for me.
     
    Last edited: Dec 15, 2021
    • Informative Informative x 1
  2. deadly

    deadly Well-Known Member

    Joined:
    Jul 8, 2016
    Messages:
    1,465
    Likes Received:
    505
    Version: 1.3.1.1
    Track & Layout Used: Interlagos Historic 78 Outer Track (The Speedway)
    Car Used:
    Formula USA (CART)
    Applicable Settings
    : Offline Race, 50 Laps, Mandatory Pit Stops
    Report: AI has severe problems with pitting on this track layout. They rush into pit lane way too fast, clearly exceeding the speed limit, than desperately try to brake in order to stop the car at their pit spot. Some almost spin, miss the spot and then go out again without having pitted, like it was some kind of drive through. Some really smash their car into the wall and afterwards exit without pitting, too. They try to pit several times during race and always fail to do so.
    Only the cars which have their garage spot in the middle or rather at the end of the lane manage to have a proper pit stop.
    Result: Several cars have a DQ at the end of the race.
     
  3. reptilexcq

    reptilexcq Active Member

    Joined:
    Jun 5, 2021
    Messages:
    271
    Likes Received:
    98
    Caterham handling is terrible. Try it out in the rain...it slips and slides all over the place. I guess I'm used to driving fast cars.
     
  4. Daniel Escalona

    Daniel Escalona Member

    Joined:
    May 25, 2020
    Messages:
    65
    Likes Received:
    53
    The Roco's inverted tire animation bug is still present in V1.3.1.1 please fix for next updates!
     
  5. VFX Pro

    VFX Pro Well-Known Member AMS2 Club Member

    Joined:
    Mar 31, 2017
    Messages:
    1,145
    Likes Received:
    625
    @Renato Simioni Any chance the "wheel hidden" settings that recently broke be fixed for the next release? Thanks to you and the entire team for the hard work, truly appreciated.
     
  6. VFX Pro

    VFX Pro Well-Known Member AMS2 Club Member

    Joined:
    Mar 31, 2017
    Messages:
    1,145
    Likes Received:
    625
    Track & Layout Used: N/A
    Car Used: N/A
    Applicable Settings: N/A
    Report: If a user changes any audio settings/volume, there is no easy to go back to the default values. Reset to Default button is missing from this screen. Audio Reset to Default option missing.jpg
    Steps to Reproduce: N/A
     
    • Agree Agree x 1
  7. I Drive Demons

    I Drive Demons Member

    Joined:
    Mar 2, 2021
    Messages:
    76
    Likes Received:
    20
    Track & Layout Used: Jacpuraga Oval
    Car Used: Opala 86
    Applicable Settings
    : Offline Race, 30 minutes, Custom Weather, AI 100, Default Setup, 30% dead zone on the brake.
    Report:The below issue happens interminently. I accidentally also opened up a multiclass race and the Opala cars were "raining" down on the DPI's. (I meant to just do Opala). I then restarted as Same class, all cars were jumping all over the place, restart again, just my car, restart one more time. Get down to 10 minutes left during the rain and BAM, my car instantly sinks into the ground and I get spun for no discernable reason. I know I knicked the wall, but no where near hard enough to cause that. It looked like the car just clipped into the wall for a split second, squatted on the track and launched me.

     
    • Agree Agree x 1
    • Informative Informative x 1
  8. azaris

    azaris Well-Known Member AMS2 Club Member

    Joined:
    Aug 30, 2020
    Messages:
    1,155
    Likes Received:
    578
    The Opalas are too big to fit in the default pit position at some tracks so they start bouncing around as they clip into 3D objects. The same thing happens at Virginia North.
     
    • Like Like x 1
    • Informative Informative x 1
  9. deadly

    deadly Well-Known Member

    Joined:
    Jul 8, 2016
    Messages:
    1,465
    Likes Received:
    505
    This can also happen on the Jacarepagua 2005 Layouts.
     
    • Informative Informative x 1
  10. I Drive Demons

    I Drive Demons Member

    Joined:
    Mar 2, 2021
    Messages:
    76
    Likes Received:
    20
    That's still some bizarre behavior. Still seems kinda buggy to me, if that is the case, cause the 86's are not that big to begin with.
     
  11. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,905
    Likes Received:
    2,190
    Still have the this issue:
    Till 7th December 2021, 15 o'clock, there is real historic weather
    but with 7th December 2021, 16 o'clock, till today, there is no real historic or current live weather.
    What is the problem?
    Can someone confirm this issue?
    It does not matter which track/location.
    rw1.jpg
    rw2.jpg rw3.jpg
     
  12. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,138
    Likes Received:
    8,207
    Please try to sync your windows clock, it's worth a shot. The system needs it to work properly.
     
  13. Roy Niessink

    Roy Niessink Well-Known Member AMS2 Club Member

    Joined:
    Mar 27, 2020
    Messages:
    1,213
    Likes Received:
    558
    I just tried this, i get historic weather on the 7th of december 2021 all day long, but not on the 8th of december, the time does not matter
     
  14. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,905
    Likes Received:
    2,190
    My system time / date is correct, 16th december 2021 13:49 o'clock (Germany)
     
  15. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,138
    Likes Received:
    8,207
    Synced properly by windows with internet time? It just needs to be off a bit to be able to fail. This already happened to other users.
     
    • Useful Useful x 1
  16. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,905
    Likes Received:
    2,190
    .
     
  17. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,905
    Likes Received:
    2,190
    YES mate, thanks.!
    After restarting AMS it is working again!:):D
     
  18. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,905
    Likes Received:
    2,190
    Try the same as @CrimsonEminence wrote.
     
  19. Roy Niessink

    Roy Niessink Well-Known Member AMS2 Club Member

    Joined:
    Mar 27, 2020
    Messages:
    1,213
    Likes Received:
    558
    this worked, but my time seemed fine, so i need to tell windows to sync time now everytime i wanna play ams2 to make sure it works properly?

    Will this be the same when you run a dedicated server that you need to sync the server time to work with real weather settings?
     
  20. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,138
    Likes Received:
    8,207
    You don't need to do it each time usually. I never did it, for example and it works fine here. If it happens again give me a heads up.
     

Share This Page