Bug Reports - Automobilista 2 (Read the Opening Post)

Track & Layout Used: N/A
Car Used: F-Truck
Applicable Settings: N/A
Report: on display speed units in mph (instead kph) and oil temp in °F (instead °C)
Steps to reproduce:

 

Track & Layout Used: Kyalami 2019
Car Used: F-Truck
Applicable Settings: N/A
Report: don't know if it's a bug, but brake temp. is raising a little bit too extreme (cooling is on max). After some laps, it's more or less impossible to brake down the truck at turn 1. Attached see the brake temp. chart
Steps to reproduce:

 

Track & Layout Used:Brands Hatch
Car Used: Sprint Cars
Applicable Settings: N/A
Report: p1 to last position while finishing a lap ( see the video)
Steps to reproduce: Online race at Brands Hatch, not sure if this is happening more than this time but it's worth to address this issue before making an rating system

 

figured it out. Thanks for such a wonderful game guys!

 

This is because of the lap count bug. Lap count does not increment so when you cross the start/finish line you go to bring back of the field on lap one. As everyone else crosses the line same thing happens and you end up first again, until you cross the line... But can never finish the race anyway

 

They should bring a hotfix for this...

 

Track & Layout Used: all
Car Used: all
Applicable Settings: Trustmaster TS-PC advanced settings active in driver
Report: The wheel is recognized as Trustmaster TX F1 Advanced, It is working but the button numbers doesn't match and I'm not sure if I make full use of all features my TS-PC has (FFB, rotation angle)
Steps to reproduce:
Any change AMS2 will recognize my wheel as Trustmaster TS-PC Advanced, and not as a Trustmaster TX F1 Advanced?

 

Track & Layout Used: Curitiba in
Car Used: Sprintracer
Applicable Settings: 25 Laps race, (AI 100,aggress.60) Playing in VR.
Report: With a rolling start the gear dial jumps from 2gear to 1 after green lights(when should show 3gear), then shows 4 gear, exhaust flames not appearing as it should, randomly appearing in one or two cars in rare occasions. I also selected 4 weather slots and real-time, but it didn't run through the weather. (In-game time set x10, maybe I didn't get how to set this right)
Steps to reproduce: Run Sprint race in Curitiba, 20 cars, 25laps with rolling start and pitstop, four different weather slots realtime and time multiplierx10.

 

Track & Layout Used: N/A
Car Used: N/A
Applicable Settings: VR
Report: Rev lights not working in Opala 86
Steps to reproduce: Run any track, any event in VR with Opala 86, and go through the gears.

 

All of a sudden, the mouse pointer isn't lined up with the UI - I can't select some elements of it now.
It works fine when in VR though. Not sure what happened.
Anyone else have this issue?

EDIT: My bad, I somehow forgot to lower the resolution in the graphicsconfigdx11.xml file.

 

The shift light also stays on at all times during night driving.

 

Track & Layout Used: ANY
Car Used: ANY
Applicable Settings: ANY
Report: Skipping Gears
Steps to reproduce: happens sometimes when I use the paddle shift

(Logitech G27)

 

Track & Layout Used: Any
Car Used: Any
Applicable Settings: Any
Report: Thrustmaster TS-PC Ferrari Challenge Edition Rim not properly detected in 'advanced' mode
Steps to reproduce: Gamepad and navigation buttons not working and can't be remapped. All other in game buttons can be remapped, but since you can't navigate and I play in VR it can't be used. The wheel works correctly in 'normal' mode, but you can't use a bunch of the wheels inputs this way.

 

Track & Layout Used: Imola
Car Used: F1V10
Applicable Settings: VR
Report: Was DQ'd for speeding in pitlane. The menu screen following the DQ the buttons like Exit session or monitor would not work.
Steps to reproduce: speed in pitlane and it sends you to the garage from there I was not able to leave had to ALT TAB out and close down Automobalista 2

 

This might be due to the age of the wheel causing bouncing of the contacts. Check if it happens in other games, especially older ones without debouncing.

 

Track & Layout Used: Brands Hatch
Car Used: Any
Applicable Settings: race or test day
Report: no times are calculated. Cannot qualify as no lap counts and times are calculated
Steps to reproduce: create a race or practice session and start driving to times are calculated for player or AI.

 

Track & Layout Used: ANY
Car Used: ANY
Applicable Settings: VR
Report: Still getting blue flagged when overtaking other drivers during long races, all tracks, all cars, quite often.
Steps to reproduce: happens sometimes when in traffic during long races.

 

I've done several tests, other players with new equipment and different from mine have the same problem

 

Eliminating double-shifts (and more) with Logitech wheels

 

I tried it, but it didn't work, thanks for the tip.