1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Bug Reports - Automobilista 2 (Read the Opening Post)

Discussion in 'Automobilista 2 - General Discussion' started by Heitor Facuri Cicoti, Apr 4, 2020.

  1. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,904
    Likes Received:
    2,190
    Track & Layout Used: Brands Hatch, Spielberg historic
    Car Used: Formula retro
    Applicable Settings: race
    Report: When AI is requesting pit stop or is going into pit (don't know when it really happens) it will cause a stocking/hanging of the PC of about 0.1 till 0.5 seconds. As I think, it's only in race, in practice or quali it doesn't happen
    Steps to reproduce: AI has to request pit stop or has to go into pit, for example after race is finished (cool down lap into pit)
     
  2. Lukas Ranicar

    Lukas Ranicar New Member

    Joined:
    May 29, 2020
    Messages:
    20
    Likes Received:
    20
    Reply of Snetterton time trial. When replay finished the game crashes to bug splat.
     
  3. Vinicius Piltz

    Vinicius Piltz New Member AMS2 Club Member

    Joined:
    Sep 30, 2017
    Messages:
    1
    Likes Received:
    0
    Track & Layout Used: Velocitta
    Car Used: Sprint race
    Applicable Settings:
    Report: Reparamos alguns problemas em Corridas online. Tem um bug que permite a troca de piloto mesmo quando nao ha outro piloto pra entrar no carro, ficando assim a IA andando na pista.
    Steps to reproduce: Entrar em uma corrida, solicitar box, ativar troca de piloto.
     
  4. Andrew Hollom

    Andrew Hollom Active Member

    Joined:
    Mar 9, 2019
    Messages:
    185
    Likes Received:
    73
    Track & Layout Used: Bathurst
    Car Used: Various (see below)
    Applicable Settings: v1.0.0.3 in Time Trial mode
    Report: All the Caterhams suffer from the FFB turning right after you gain control, which stays like this till you eventually crash. Other cars tried (Puma 052, Super V8, Formula V10 and Ultima Road) were all unaffected and drove nicely.
    Steps to reproduce: Go into Time Trial mode and drive the Caterhams.
     
  5. pavig

    pavig Member

    Joined:
    Aug 31, 2017
    Messages:
    33
    Likes Received:
    10
    Track & Layout Used: Any track
    Car Used: Any Copa Truck (Iveco, Man, Mercedes-Benz, and VW tested)
    Applicable Settings: Night time
    Report: Switching on headlights in copa truck does not switch on headlights, instead turns on glow for dash rpm meter.
    Steps to reproduce: Go to any track at night and try toggling headlights. .
     
  6. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,904
    Likes Received:
    2,190
    Track & Layout Used: -
    Car Used: Ginetta G58 P1
    Applicable Settings: -
    Report: rear camber settings aren't symmetric / don't change symmetric
    Rear right has also other values compared to rear left
    Steps to reproduce: - ginetta-setup.jpg
     
  7. sherpa25

    sherpa25 Active Member AMS2 Club Member

    Joined:
    Mar 11, 2016
    Messages:
    493
    Likes Received:
    77
    In addition to this, actually, sometimes the 'Symmetrical Setup check' is reversed.
    For ex., when values don't change symmetrically while it is ticked, when you untick it, the values would change symmetrically. Sometimes, it works correctly, sometimes it doesn't.

    Also, some values on the left and right columns cannot be changed until you highlight a value in the center column.
     
    • Agree Agree x 1
  8. AndreiC

    AndreiC Active Member AMS2 Club Member

    Joined:
    Apr 3, 2019
    Messages:
    740
    Likes Received:
    186
    Track & Layout Used: Bathurst
    Car Used: Any
    Applicable Settings: v1.0.0.3 in Free Practice and Qualifying
    Report: If time runs out and I am still on track doing laps I am announced the Practice or Qualifying is over but I cannot check any of the options leave the session or move to the next one. I have to use CTR+ALT+DEL to close the game.
    If time runs out and I am still on track stopped and I do not finish at least one lap I am not announced the Practice or Qualifying is over and AI keep doing laps in an endless loop.
    If I press ESC and go back to the pits I cannot check any of the options leave the session or move to the next one. I have to use CTR+ALT+DEL to close the game.
    Steps to reproduce: Select "Single race" against AI do Practice and Qualifying
     
  9. AndreiC

    AndreiC Active Member AMS2 Club Member

    Joined:
    Apr 3, 2019
    Messages:
    740
    Likes Received:
    186
    Track & Layout Used: Bathurst
    Car Used: P4 Metalmoro Duratex MRX
    Applicable Settings: v1.0.0.3 in any session
    Report: In car "Setup menu"
    -Symmetrical setup is checked
    -Ride height values are not equal in the setup
    /Uncheck Symmetrical setup
    /Change values for Ride height until both values are equal
    /Check Symetrical setup again
    Front right tyre values gets reset to the initial value.
    Steps to reproduce: Select "Single race" against AI go to car "Setup menu" change Ride height values
     
  10. Ettore

    Ettore Well-Known Member AMS2 Club Member

    Joined:
    Feb 21, 2020
    Messages:
    2,477
    Likes Received:
    1,537
    Track & Layout Used: Interlagos Modern
    Car Used: Formula V10
    Applicable Settings: Weather Variable
    Report: Wet tires graphically displayed instead of dry tires, car behaves like on dry tires.
    Steps to reproduce: During a variable weather quali session I came in as the rain started and I am using "adjust by weather". As the car went into the box the wet tires were shown on. Session finished without me driving again. I loaded the race setup (always with tires on "adjust by weather") and once at race grid tires were still showing as wet. As I came in first lap to have them swapped they felt like dry tires while driving. Once in the pit when the tires came off all of a sudden they were graphically shown as dry. The new ones came on still showing as wet. I finished the race with lap times as on the dry tires, so the problem is only graphical
     
  11. Micropitt

    Micropitt Mediocre driver doing mediocre laps AMS2 Club Member

    Joined:
    Jun 16, 2020
    Messages:
    728
    Likes Received:
    544
    Track & Layout Used: Imola
    Car Used: Mitsubishi Lancer RS
    Applicable Settings: TT
    Report: In setup it is not possible to change tire pressure or settings for the front differential. Also rear brakes don't seem to work.
    Steps to reproduce:
     
  12. sci006

    sci006 Active Member AMS2 Club Member

    Joined:
    May 18, 2020
    Messages:
    127
    Likes Received:
    69
    Track & Layout Used: Any
    Car Used: Any
    Applicable Settings: MP
    Report: Looks like MP lobby realism settings changes your personal default settings.
    Steps to reproduce:Setup personal realism setting to full / max. Go into a MP lobby with realism settings set to off. When you exit and return to main menu your personal settings will now be changed to mirror MP Personal Before.JPG MP Lobby.JPG Personal After.JPG lobby settings
     
  13. Breiz One

    Breiz One New Member AMS2 Club Member

    Joined:
    Jun 30, 2019
    Messages:
    11
    Likes Received:
    3
    Track & Layout Used: Any track
    Car Used: F-Ultimate
    Applicable Settings: Any settings
    Report: FFB bugs(The steering is forced to turn to the right.)
    Steps to reproduce: Using a controller with FFB and going out to tracks with F_Ultimate
     
  14. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,904
    Likes Received:
    2,190
    This issue we had in EA but was fixed. Are you sure you have the lastest version of AMS? (1.0.0.3)
    What FFB setting do you use?
     
  15. sherpa25

    sherpa25 Active Member AMS2 Club Member

    Joined:
    Mar 11, 2016
    Messages:
    493
    Likes Received:
    77
    Track & Layout Used: Any (but tried in Bathurst, Adelaide).
    Car Used: Ginetta GT4
    Applicable Settings: Any
    Report: Accelerator does not reach 100% (like 95% only), regardless of track. Other cars tried (Stock Car, Super V8) reach 100%
    Steps to reproduce: I'm using Simhub pedal inputs to see this. Green bar doesn't reach the top, whereas it does with the other cars tested. (Also tried in both Beta and Release version and issue appears in both).
     
  16. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,904
    Likes Received:
    2,190
    What kind of engine map do you use?
    In setup, you can choose 0.9, 0.95 and 1.0 (for most cars).
    I know, in telemetry software (RST) this will impact the max. throttle position value which is 90%, 95% or 100%.
    How it will have an effect on in-game telemetry-tool, I don't know at the moment.
     
    • Agree Agree x 1
  17. Micropitt

    Micropitt Mediocre driver doing mediocre laps AMS2 Club Member

    Joined:
    Jun 16, 2020
    Messages:
    728
    Likes Received:
    544
    Houston, we have a problem

    Track & Layout Used
    : Cascavel
    Car Used: Hot Cars / Pas HC
    Applicable Settings: TT
    Report: Got off track right before T3, drove up the hill towards the Stands, went through the Stands and then in to the Sun
    Steps to reproduce: See above

    flying.jpg
    flying2.jpg
     
    • Funny Funny x 1
  18. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,904
    Likes Received:
    2,190
    What's up with your windshild? Is it splittered? New feature?
     
  19. sherpa25

    sherpa25 Active Member AMS2 Club Member

    Joined:
    Mar 11, 2016
    Messages:
    493
    Likes Received:
    77
    Thanks for the info, will check it again tom. Isn't it set by default to 100%?
    UPDATE: Indeed it was at 90%, most likely got changed when my wheel was not centered when I viewed setup, even with wheel rotation set to 0 in controls.

    REQUEST: REIZA, can we pls remove the Menu Editing by Wheel rotation.
     
    Last edited: Jul 23, 2020
  20. alink

    alink Well-Known Member AMS2 Club Member

    Joined:
    Dec 3, 2017
    Messages:
    1,904
    Likes Received:
    2,190
    As I think, it's not always on 1.0. Sometimes it had other settings but I can't say if it's dependig on car, track, or something else. Sometimes I have the feeling that setup settings are kept in memory and will be reused if you switch the car (within this car's limitiations and opportunities). So if you switch the car or track, not always a default setup will be loaded at the first time. Maybe this should be reported as a bug but I always forget or I'm not really sure...
     
    • Like Like x 1

Share This Page