1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Physic discussion thread

Discussion in 'Automobilista 2 - General Discussion' started by Avoletta1977, Jan 3, 2021.

  1. newtonpg

    newtonpg Active Member AMS2 Club Member

    Joined:
    Dec 29, 2018
    Messages:
    513
    Likes Received:
    174
    Lets make an exercise:
    If max force applied to a calibrated brake pedal is roughly equivalent to 30kg you'd be around 7 grams per step in a linear response at 12 bit or 0.5 g/step on a 16 bit. And it assume more critical values when the max force applied is reduced during calibration.
    I'm afraid no one on earth can take benefit for more than 12 bit resolution for pedals. Even 12 bit for left foot braking (for right handers) means too much :eek:

    My Pedals have 16 bit controller why I'm so slow? :oops:
     
    • Funny Funny x 1
  2. oez

    oez Mayor of Long Beach AMS2 Club Member

    Joined:
    Aug 27, 2020
    Messages:
    677
    Likes Received:
    659
    Yeah I agree. I haven’t really ever understood 8-bit+ in pedals as far as performance goes. I think more than 8-bit has more to do with how you can still achieve 256+ steps even if you have a rather aggressive curve. But surely you can achieve that with 10 to 12. So I’m also not sure why 16-bit would be useful. Maybe if you limit a 90kg load cell to 30kg in software, you still have loads of steps even with a curve. Just surplus like in color grading and audio production. In the end you only need so much to enjoy the result. But the processing part needs extra so you don’t get banding etc
     
  3. Dady Cairo

    Dady Cairo "Son of Spartakus" and "Leisure Nostradamus" AMS2 Club Member

    Joined:
    Jun 12, 2017
    Messages:
    2,155
    Likes Received:
    742
    Sims: AMS2, RRE / Unninst: AC, rF2, AMS1, PC1, rF1, iR
    +1:)
    i'm bad @math so can't argue about that.
    I hit the brakes till i hear the tyres scream,so i know,that is the limit!:D
    TBH i have never made up my mind about that till some guys come along with that "sensivity" thang.
    I'm a driver no engineer....i try to adapt to what is given to me.
    sorry english is only my second language:)
     
    • Funny Funny x 1
  4. BrunoB

    BrunoB TT mode tifosi

    Joined:
    Jun 13, 2020
    Messages:
    2,589
    Likes Received:
    654
    Thanks.:)
    Then maybe the wheel itself showing +- 1800 "something" above is 16bit - because as can be seen then the value in midposition is showing 32730 and 2 x 32730 = 65460 - which is pretty close to your 16bit steps of 65536 positions.
    Hehe so maybe my wheel isnt that low end as I thought :D
     
  5. Gagaryn

    Gagaryn Out To Lunch AMS2 Club Member

    Joined:
    Dec 26, 2019
    Messages:
    590
    Likes Received:
    252
    [​IMG]
     
    • Funny Funny x 1
    • Informative Informative x 1
  6. BazzaLB

    BazzaLB Well-Known Member

    Joined:
    May 4, 2020
    Messages:
    438
    Likes Received:
    299
    It effects the RSR whilst driving. Honestly, your response is hardly surprising. Every time someone comes up with anything remotely relating to an issue you come along with your untested conjecture ignoring everything anyone else has posted to claim everything is golden.
     
    • Winner Winner x 1
  7. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,131
    Likes Received:
    8,191
    Also our conjecture of assuming controls/axis issues wasn't correct. Like stated, it was as much speculation. Let's be fair here, nobody has stated, that there is no issue, but the discussion was more about what was causing it and in this case, Reiza has a lead already, so let us put this to rest, it will be solved. :)
     
    • Like Like x 1
  8. BrunoB

    BrunoB TT mode tifosi

    Joined:
    Jun 13, 2020
    Messages:
    2,589
    Likes Received:
    654
    I guess it dont matters so much - but the starting point on the green line on your amazing scientific graphic illustration of the liniar Sensitivity 50 should be 0(zero).
    As I have tried to show here.

    ByTheWay: I also think that the starting point of your unlinear Sensitivity of 20 should be 0.
    Good graphics by the way :D

    11.jpg
     
  9. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,131
    Likes Received:
    8,191
    Yes, that's what the issue is about. You missed the point here, why do you think, the red arrow and red lines were pointing at the gap :p......It is literally this gap, that people are talking about here. You touch the throttle to 1% and it already puts out torque for (theoretical numbers, it isn't linear anyway with throttle map) 5%, you can imagine.
     
    Last edited: Aug 12, 2021
    • Like Like x 1
  10. oez

    oez Mayor of Long Beach AMS2 Club Member

    Joined:
    Aug 27, 2020
    Messages:
    677
    Likes Received:
    659
    WELL ACTUALLY your graphs should've reflected the fact that the curves do indeed start from 0 and it's just the first real value that forms that step visualised in the graphs.

    *corrects glasses*

    But I guess scientific accuracy was too much to ask.
     
    • Funny Funny x 2
  11. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,131
    Likes Received:
    8,191
    1. No

    2. Do you guys really want to discuss something obsolele?

    Once again:
    At 50 sensitivity you get instant theroretical 5% torque at 1% throttle input. So the curve doesn't start at 0 but at 5% to illustrate, what the user feels. EDIT: Beneath a present for you!:p
     
  12. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,131
    Likes Received:
    8,191
    • Friendly Friendly x 2
    • Funny Funny x 1
  13. oez

    oez Mayor of Long Beach AMS2 Club Member

    Joined:
    Aug 27, 2020
    Messages:
    677
    Likes Received:
    659
    2. No because it was a joke :D
     
    • Informative Informative x 1
    • Friendly Friendly x 1
  14. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,131
    Likes Received:
    8,191
    I improved the graph further!:D
    jfy.png
     
    • Funny Funny x 2
    • Useful Useful x 1
  15. BrunoB

    BrunoB TT mode tifosi

    Joined:
    Jun 13, 2020
    Messages:
    2,589
    Likes Received:
    654
    And you probably feel an urgent need to patronize people who think slightly otherwise from you.
    Probably also Irritating for other people who just are giving their thoughts about this issue.
    But maybe a must for you for some reason or another.

    But lets start again.
    The 0/0 starting point on the graph does NOT illustrate the point where "You touch the throttle to 1%".
    The 0/0 starting point does illustrate when you havent pressed the throttle pedal at all.
    But where I think you are wrong is that you illustrate the next step where you begin to press the throttle as a gap or jump.
    A jump up to where the line illustrating the transfer law begins.
    I dont think there is a gap at all.

    ByTheWay: At least for me it wasnt very hard to vocal this correction to your oppinion without patronizing you. :)
     
    • Funny Funny x 1
  16. Maser V6

    Maser V6 Assume nothing._ Verify everything._Have fun AMS2 Club Member

    Joined:
    Mar 27, 2020
    Messages:
    2,494
    Likes Received:
    1,416
    this. From saturday 9 am
    The video was out same day .

    Quote
    'Sit and hold the RSR full throttle.
    Slowly release throttle to near zero input.
    The car is still revving its boll0cks off
    Agreed
    @TekNeil + credit to others inc

    Post was responsible for my testing.
    Whats important here imo is we take onboard observations made by others and rather than disagree or slate we test in a logical fashion to prove or disprove first.
    Unquote


    .Have fun.
     
    Last edited: Aug 12, 2021
  17. Beccobunsen

    Beccobunsen Well-Known Member

    Joined:
    Jul 12, 2020
    Messages:
    461
    Likes Received:
    256
    When you push the thing, the other thing full of gear and stuff not do anything, after some time the pistons box, suddedly, start the brum brum, not from the beginning but from a point that do a hell of noise and destroy 500$ of tyres
     
  18. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,131
    Likes Received:
    8,191
    ByTheWay:
    True, sometimes you can hold back...not often tho. :)
     
    • Funny Funny x 1
  19. Dady Cairo

    Dady Cairo "Son of Spartakus" and "Leisure Nostradamus" AMS2 Club Member

    Joined:
    Jun 12, 2017
    Messages:
    2,155
    Likes Received:
    742
    Ohhhh,my head....o_O
     
    • Funny Funny x 1
  20. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,131
    Likes Received:
    8,191
    Car makes wrooom too much. Fix low wroom!
     
    • Informative Informative x 1

Share This Page