Automobilista 2 Custom Force Feedback - Overview & Recommendations

Nice work and good to see you again @Stakanov .
I’m not far from settling on finale configurations for Delta V3.
i’m not sure what will come first , V3 or Monza .
but in it i have replaced the complicated desmos relax with some customised earlier code so it works with 4.6 .
Makes it much easier and feels intuitive .
so watch this space .
will probably be my final tune as the T300 is soon for replacement and i believe it will be perfectly fine for use on most wheels but might need your polish for g29 .

 

Hi @Kuku Maddog i reciprocate the pleasure and I will be very available to carry out any test ... I'm very curious about this Delta V3!!
Good day to everyone!!!

 

Uh, it’s pinned now!

 

I start slowly to understand these files, that are fantastic even without additional tuning (I am not yet able to modify them harmoniously), compared to the default already the use of the custom ffb alone highlights their greater informativeness.
I have tried the original file 4.6 by Karsten and the tuned files ones by AndreiC, Kuku, Peter and Stakanov ... all are superior to the default and each has its own different nuance. I must say that they improve the driving experience a lot by enriching them with sensations and greatly reducing the hated elastic effect of the default ffb.
You are great guys. Thanks a lot!

Only a few particularly swaying cars I can't balance and especially those that have manual clutch and H gearbox ... some advice???

 

Using V 2. its very very good. Thx. But somehow i am missing any road / wheel feedback in fast corners. Its ok in slow corners. How can i improve? Thx

 

Caution.
Monza Historical oval has exposed something that’s a issue with the 4.6 configuration.
On the banking, there’s a few scary jolts caused by the way the caster feel works and the apparent difference in wheel or rack angle on the high banking.
It doesn’t occur in default or 4.4.
This will need investigation…..
@Karsten Hvidberg @Shadak @Panos Schoino

 

I noticed it varied a bit between cars. Group C seemed fine, but Formula Classic G3 was quite bad…

(This is with Kuku’s Delta X V2.1)

 

yes seems worse with limited suspension travel . it’s dangerously bad with some cars. But also is making for quite a bit of clipping over the undulating bumps on the banking.
anything 4.5 or lower is fine , as the steering feel comes more from the tyre or kinda feels like top of the suspension .
4.6 is taking signals more directly from steering rack or geometry and as soon as caster info is added it freaks out.

 

Thanks @Kuku Maddog for your efforts.
I tried your Delta X V2.1 with relaxos on my T300 with your suggested settings in the file.txt and in the T300 panel.
Unfortunately, it's like driving on a cloud.
I tried at Spielberg with P1 and F-Classic gen 3.
There were no fine details of the asphalt.
The standard AMS FFB is much better.

 

Are you sure you were actually using his file? If you navigate to the telemetry HUD, was it showing the proper description "rFuktor 4.6 etc."? It if was showing "undefined" or some such, you were using the "default custom FFB" which is some weird template file that produces a bland and uninformative feeling.

 

Yep. The custom FFB is loaded.

 

I tried also the old FFB from NuScorpii that I currently use. And the fine details are also in that setting, like the default one.

 

You don’t have to use my settings. They are just a guide. Also you are able to run the so called high end version of the tune, it’s less smooth.
also since the last TM firmware update a few weeks ago I’ve had to crank up strength of settings a bit as my wheel felt a bit mushy.
Also history tells me that not all t300s are created equally,
For example, default feels like driving on flat spots for me. Just too rattling and pendulum swaying.
Most also prefer V2 .
2.1 was a bit of a experiment.
V3 was going to be much tighter feeling , but can’t use now with above issues.

 

Thanks, Kuku.
Yes, naturally I tried different settings. And I tried also other "rFuktor" published in a huge zip by @Karsten Hvidberg (I don't know what rFuktor means. I work a lot and usually I don't have time to spent to dive in these universes)... saying... I tried other rFuktor and the "cloud feeling" was the same.
I'll try the V2.
Thanks!

 

Well everyones tunes based of the same core formula, so if they all feel the same , then fundamentally they just aren’t suitable for your taste or particular wheel unfortunately, but anyone who is happy with default should just stay with that .

 

What are your setting in windows for your wheel?

 

Yes, also the V2 (for me, obviously) don't change.
I swap in a test day in Spielberg with P1 car from V2 to AMS 2 Default, and the Default has much details in every single bump.
"Your" bumps are more uniform and soft. The long descent after the turn one in Spielberg is like skiing, with barely graining details.
Probably it's me or my wheel.
Thanks again for your time.

 

75/100/100/0/0

 

But i tried also 85% and 99%, accordingly with the decreasing of the gain and effects in AMS2 panel.

 

Strange, you could try using this file, I think I only tweaked a few things in it regarding the suspension. Anyway the road feel differs quite a bit from car to car, to some extent that in some cars the road textures are barely there.
(NAME: Silver Raw - rFuktor 4.6 - Delta-X Tune_V2.1 - Momentum Rack 6.3 - Karsten with Shadak & Panos - T300 file tuned by Kuku)