Bug Reports - Automobilista 2 (Read the Opening Post)

V1.2.4.3
Track & Layout Used: Salvador
Car Used: 2021 Stock car (but any car will do)
Applicable Settings: Replay interface
Report: Camera views do not switch as the player car travels round the circuit, the same camera continues to track the car through trees, walls etc. If the user manually switches the trackside camera, then that camera will remain fixed on the player and not switch again. This is a great track with great racing, shame about the replay
Steps to reproduce: Do a quick race, go to the replay after the race, marvel at the lack of camera switching

 

v1.2.4.3
Track & Layout Used: Londrina Kart One (and all other tracks)
Car Used: Rental Kart
Applicable Settings: Track preset Green/Light/Medium/Heavy rubber
Report: Track rubber preset no longer has any visual or performance effect - track seems to have Green State or maybe Default Progressing, hard to tell. Non-rubber states like Damp/Wet work just fine, though. Track rubber presets were working back around v1.2.3.x but have stopped working some time after that.
Steps to reproduce: Test Day, dry weather, set track preset to Green and drive a few consistent laps to record your average lap time. Then repeat, with track preset set to (Light/Medium/Heavy) Rubber. The lap times are not noticeably faster with rubbered-in state than with green state. Also, the track no longer gets a dark rubber trail for the heavier rubber presets. But this bug is filed mostly for the lack of difference in grip, not necessarily the visual effect.

 

V1.2.4.3
Track & Layout Used: Any
Car Used: GT3s
Applicable Settings: Activate factory ABS
Report: Wheels keep locking with any ABS configuration. I barely can't feel any difference between 1 or 10/
Steps to reproduce: ...

 

V1.2.4.3
Track & Layout Used: Monza 1991, Hockenheim 1977, Hockenheim junior 1988
Car Used: GT1, BMW pro car, formula trainer
Applicable Settings: custom championship, 3 rounds, real weather X5 progression
Report: the white / reflective trackside areas and materials are back, also has trees missing. Happens in qualifying and race

 

And another bug, just a quality of life one. The Hans device does not connect properly to the helmet. You can see where the clip is meant to connect on the back side of the helmet but when the helmet moves you can see the Hans not attached to it.

 

This bug happened to me too at Montreal GP in a Formula Ultimate championship race, right after qualify.

Had to exit and restart the race to get rid of it. Real weather enabled, the pre race interface showed overcast and moist track.

Thanks.

 

I will post the exact date when at home tonight. I remember I set it as the real date that race took place on the 2019 F1 championship tough.

Edit: After I restarted the race, the track conditions were different than the original race attempt: Clear skies and dry track.

 

Hi Crimson, I setup that race to be on Jun 9th, 2019.

Thanks.

 

1st of October but can't remember the year either 2005, 2006 or 2007. The race started at maybe 5 or 6pm. I can't remember the dates for the Monza races when this happened. the photos attached were just for Hockenheim.

 

• See

The same happens to me with weather being different as well, not only when getting this bug.

 

I would be curious to know why the sky and near the sun there is a cross hatching effect on the pixels. PC2 used to suffer from this as well, never noticed it in any other sims.

 

V1.2.4.3
Track & Layout Used: any
Car Used: any
Applicable Settings: garage
Report: If in garage default screen, weather informations are correct. If in garage menu weather informations are set to '19C' for all, if temp., wind, ...
Steps to reproduce:
Default screen

Garage menu screen

 

V1.2.4.3
Track & Layout Used: any
Car Used: F1 retro G2
Applicable Settings:
Report: car will never be repaired visualy if lost a wheel
Steps to reproduce:
The most damned and annoying bug in AMS

 

Build ID: 1.2.4.1823.AVX
Track & Layout Used: Any
Car Used: Porsche Cayman GT4, Porsche Carrera GT3 CUP 4.0 + 3.8
Applicable Settings: Any
Report: Switching the Suspension Setup Display from Units to Rates makes the menu unresponsive and no rates can be changed.
Steps to reproduce: Choose any car mentioned above, change from units to rates in Gameplay/Display options, open setup suspension menu. The bug exists since rates where changed to units as default.

 

Happening at Daytona now too, custom championship, x5 time progression, real weather, Cadillac DPI.

 

Build ID: 1.2.4.4
Track & Layout Used: Monza 1991 (maybe others, too)
Car Used: F_Classic Gen 2
Applicable Settings: Training/Qualifying
Report: When skipping the session, AI is all over sudden some seconds faster than the laptimes they actually achieve on track.

 

Build ID: 1.2.4.4
Track & Layout Used: n/a
Car Used: Formula V10 Gen 2
Applicable Settings: N/A
Report: Rain light looks terrible, and is too dim during race