Bug Reports - Automobilista 2 (Read the Opening Post)

Build I.D.: it has been like that for months now
Track & Layout Used: Any
Car Used: F3 301
Applicable Settings: n/a
Report: the F3 301 shows tc and abs as active in the setup screen with values 1-10.
when driving tc has the range 1-60 and abs 1-100, changing one or the other doesn't make any difference because, as the 309, both cars don't have tc or abs.

 

Track & Layout Used: Any
Car Used: Any
Applicable Settings: Any
Report: Can't use Heusinkveld sequential shifter
Steps to reproduce: Map sq shifter to gear up/down and try to use in game

I got the DD2/Universal Hub paddle shifters to work using CS2.5 mode. They don't work if i select DD2 as wheel and it's impossible to map steering axis with Wheel type = custom. But now I purchased Heusinkveld sequential shifter and tried to use it. Now it's the same problem than with paddles earlier: you can map the shifter in the controls menu but it doesn't work in game.

DD2, Heusinkveld shifter and handbrake work in others sims with no problem.

Is there any hope that issues this critical would be fixed in near future? Having to use all sort of workarounds to get as basic function as gear change to work is rather frustrating.

Edit: I'm driving in VR if it matters.

 

Ulitma GTR ride height has been raised alot on replays and photo mode. Not sure if it affects handleing.

 

Livetrack Observation Online
Track & Layout Used: Kayalami H ,Brasilia outer (maybe all} AI 100/100 and 105/100 plus players Online
Car Used: GT classic + others. (maybe all)
Applicable Settings: Dry,Cloudy,Thunder,Dry. x5 time. 8am start (race)livetrack medium.
q livetrack medium 11 am start. P 8am start livetrack default
Report: Rain/thunder in P session only No rain or change from dry in Q or Race
Steps to reproduce: full settings below
Kaya h thursday test

friday test

 

Track & Layout Used: Any
Car Used: Ginetta G58 P1
Applicable Settings: Any
Report: TC settings don't seem to do anything
Steps to reproduce:

Drive the G58 with TC1 and TC10, observe that there is very little difference in how much traction the car has. Even with TC10 it is very easy to induce wheel spin. The car is probably easier to drive with TC0 because the TC doesn't interfere to make the car weird and snappy on power.

In general, this car badly needs a physics/setup revision as it just doesn't feel connected to the road atm.

 

So unfortunately it doesn't look like the start time issue is fixed in the custom championship. Whilst you can now set different times for each of the practice, qual and race sessions to start when you actually go into the race screen and look at the session settings it shows each session starting at the time the race was set for. This has happened in each of the 4 championships I have going with different cars and tracks atm. And indeed the session clock shows this too

 

Not sure how it is meant to work but the pit strategy screen seems to be buggy. If I set every car I drive to have the same front and rear tyre pressures when I go into the pit strategy screen I have to change the tyre pressures everytime I swap cars to get the tyre pressures to match whay they are set at in the car setup screen.
For example I have the copa Montana tyre pressures set at 1.4 front and 1.3 rear in the car setup screen and I go and set the same in the pit strategy screen. Then if I drive a different car for example the metalmoro v8 and I set the front and rear tyres to 1.4 and 1.3 again when I go into the pit strategy screen the tyre pressures have changed.
This happens with all cross category cars.

 

Track & Layout Used: Any
Car Used: Puma GT5
Applicable Settings: VR
Report: Driver's feet are not placed on the pedals. The shift lights are not calibrated.
Steps to reproduce:

 

Build: V1.2.5.1
Track & Layout Used: Any
Car Used: Any
Applicable Settings: VR
Report: "Standings" feature in session monitoring has been broken by the most recent update. Pressing the button doesn't bring up the UI for it.

 

Build: V1.2.5.1
Track & Layout Used: Hockenheim 1988
Car Used: Any
Applicable Settings: Replay
Report: Replays on this track need a rework. They are done rather loveless, like they were created by a modder who was in a hurry. Cameras are far away from the action on track most of the time, zoom away from players car and love to show trees in 2nd chicane (the one with the tyre wall) instead of the racing.

 

Build: V1.2.5.1
Track & Layout Used: Bathurst
Car Used: GT4
Applicable Settings: N/A
Report: Car disappears under track if you drive behind barrier on pit exit

 

Track. Nurburgring Combined
Cars. Multi Class

Multiple AI cars running on 3, 2 and even 1 tires and keeping pace, just hovering over track.

 

Track & Layout Used: Any
Car Used: Formula Ultimate
Applicable Settings: Time Trial
Report: Time Trial Ghost and setups not saving or able to select a ghost cause there are none
Steps to reproduce:
Go to Time Trial pick the formula ultimate on any track. You won't be able to pick a ghost even with newly set times on the leaderbord a ghost is not saved. Reported this back in April but it still doesn't work.

 

Track and Layout Used: Any
Car Used: Any
Applicable Settings: Test Mode, Race Mode
Report: Add Fuel option in Pit Strategy is grayed out, so setup additional fuel is impossible. It is used to work before but after 3 month far from home for a job, now came back and suddenly, it is not working anymore. Having checked the options and found no settings for this. So it is definitely not a settings but a bug.

 

In the race settings you can chose whether it is allowed or not.

 

Track & Layout Used: not aplicable
Car Used: not aplicable
Applicable Settings: Starting game
Report: When turn on the wheel Fanatec Porsche 911 GT2 AMS2 freeze and change leds of wheel from PC mode to PS3 mode!!!! When i starts ams2 without wheel all running ok.
but if i turned wheel on... freeze again.
Steps to reproduce: self explained!
My configurations: Rayzen 5 5600G using just onboard GPU VEGA, 32gb ram memory 3600mhz, Main board MSI B450 mortar, windows10 home. Fanatec 911 GT2 using last updates of drivers from fanatec and firmeware updates. Running ok in a lot of others simulators like RF2, Race Room, Iracing, AMS1 and others.

 

Track & Layout Used: Spielberg GP
Car Used: Formula Vee/Formula Vee Fin, 20 AI
Applicable Settings: Race, 12 laps, mandatory pit stops
Report: Observed two annoying bugs:
1. My pit stop took 22 seconds just for changing tires. In the replay, I saw that the stops of the AI only lasted 5-6 seconds.
2. Half of the field was disqualified because of pitting too late.


Edit: Repeated the session. Just for fun, I set my pit stop presettings to "change nothing" (0,0 seconds). When in pits, it lastetd 5 seconds. ??
This time, 12 AI were disqualified for pitting too late or not at all.

 

Build: V1.3.0.0.1890
Track & Layout Used: Any
Car Used: TSI CUP
Applicable Settings: any
Report: TSI CUP is using Mini JCW Livery Override folder

 

Build: V1.3.0.0.1890
Track & Layout Used: Spa 2020
Car Used: McLaren 720S GT3
Applicable Settings: Time Trial
Report: Sixth gear seems much shorter. I'm into 6th before Eau Rouge and on the limiter in 6th for much of the straight. Also, I can change to a taller 6th and it takes effect.

 

Build: V1.3.0.0.1890
Track & Layout Used: Spa 2020
Car Used: Mercedes GT3
Applicable Settings: Time Trial
Report: Getting a frequent rev limiter sound that seems to be traction control intervening. Hear it turning the wheel in a fast corner. Happens even with TC set at 1.