Bug Reports - Automobilista 2 (Read the Opening Post)

This also happens at Monza 1991. They guys who have the first pit spots after entry can not stop the car because of their speed and go through lane without pitting. Some also bit in penultimate lap. Results in a DQ.

 

Car Group C mercedes
Main build
Diff gear setting. 2nd 3rd,4th are the same and not adjustable
. Car drives fine ratio wise so ui bug?

possibly reported already

 

y ( edit yes was reset to default for tt )
Just testing now and ok so was weird to have that yesterday same setting for test
(reset yesterday many ways stayed the same)
NP seems to have disappeared retested same tracks ok today

 

Track & Layout Used: Nordschleife
Car Used: AJR (but not sure it is related). multiclass session with P1, P2, P3, GT3, GT4, GT5
Applicable Settings: - Practice session, 1h long, daytime, max opponents count, not sure what else influences the behavior.
Report: The game CONSTANTLY freezes for 1-2 seconds at the same spot of the track causing me to lose the car ruining my session. It happens around the corners Wippermann and Eschbach, a few corners after the carousel. (Details in the attached file)
Steps to reproduce: Start a practice session and drive to the session after the carousel.

EDITED: this happened three or four times in the spot I mentioned, in my first or second lap. But now it just happened exiting Flugplatz in my third lap after reducing the graphics a bit. I am usinig basically minimum graphics, but sure how it influences this problem.

BTW, is there a way to cap the FPS?

 

Lancer rs
Practice session
Cleavland
Can't change any setup parameters

 

car: Any?
Race with Quali only
track: Any?
description: Needs confirming but today I had a little tryout in a P3 at Nords and crashed it a bit needing repairs in a pitstop. This I did not complete but then tried a diff combo, F3 at Donny, went into the pits for a pit stop and had to wait for a long repair (I had only done two laps without causing any damage). This made me think a pit repair was flagged to be done in the first session but not completed and somehow left active for the next pit-stop and so was carried into this second new Qual/Race session.

 

AMS Version: 1.3.1.1
Track & Layout Used: N/A
Car Used: Formula Retro Gen 2 - Bramham BT46B
Applicable Settings: N/A
Report: Important gauges not working on this car.
Steps to reproduce: see attached image for details.

 

AMS Version: 1.3.1.1
Track & Layout Used: Hockenheim 2001
Car Used: F_USA Cart
Applicable Settings: Race
Report: AI constantly shred their cars on the wall when trying to enter pits.

 

AMS Version: 1.3.1.1
Track & Layout Used: Any
Car Used: Any
Applicable Settings: Race weekend
Report: When AI goes to pits after a crash and having a damage (f.e.: lost wing), car does not get repaired in pits in a visible way. So, you see many cars on track driving without front wing.
But when watching the replay later on, there they have a new wing after their pitstop....

 

AMS Version: 1.3.1.1
Track & Layout Used: Spielberg (modern, latest)
Car Used: V10 Gen2
Applicable Settings: Race weekend
Report: AI cannot refuel in the pits, so they retire (I had 5x fuel usage).

(P.S. Pit Refueling was set to YES, of course). I had "F1 1997" championship. All other tracks were OK.

 

I experienced the same thing, at Nurburring - Formula Classic Gen 3. x3 fuel usage

 

I got AMS2 in June 2021, every time I play the game I get microfreeze at some point, the game freezes for a fraction of a second then comes back, it apparently skips frames, it always happens either in a braking zone while I'm downshifting or in the middle of a corner, and it totally messes things up (I've crashed my car several times because of these microfreezes). It doesn't matter which mode, TT, single race, championship, test day by myself, any car, any track.
My PC specs: i7 4790 @4GHz, 16GB RAM, GTX 1060 6GB, Windows 10 Pro.
My graphical settings in the attachments:

 

That's not enough info.... Have you done the usual, updated windows, drivers, hardware bios, is your hard drive full, fragmented, etc... Which A/V are you running? What other services are running at the same time? (Sync tools, zoom, etc..) that might be sucking the lifecycles out of our CPU/GPU, etc... Check if you have bad checksums on your hard drive? Re-installed the game? If all of that is already done, time to reformat your computer...

 

1) Yes, everything up to date.
2) no, 500+GBs of free space.
3) Windows Defender, the entire Steam folder is in the exceptions list.
4) none, only AMS2 & Steam client, I disabled all background programs I could in Windows settings.
5) I'm not going to reformat my computer because of 1 game, there has got to be another option considering I only have microfreezes in AMS2.

 

edit: nm, i see now you already have udp turned off

 

AMS Version: 1.3.1.1
Track & Layout Used: Brasilia
Car Used: Formula USA cars
Applicable Settings: N/A
Report: Car hits wall when exiting pit building causing damage.

 

AMS Version: 1.3.1.1
Track & Layout Used: Cadwell
Car Used: G55 Supercup
Applicable Settings: Rolling start in online race
Report: While under AI control the car was driven into the right side wall by the AI coming out of last turn, got 3% damage on the front. Another guy in the lobby said the same happened to him before the start under AI control.

 

Report: Near physical injury issue. At the start of time trial, there is a massive jerk/surge movement when using a motion rig (running SimTools). Please fix ASAP.
AMS Version: 1.3.1.1
Track & Layout Used: Jacarepagua (but realized it happens on any track)
Car Used: Formula Reiza and many formula retro cars. Perhaps, this is happening to all cars, but I have not done much trial since I discovered this jarring issue.
Applicable Settings: Time Trial

Actually, this also ties in well with the need to stop the motion related channels of telemetry when a reply starts, it keeps being sent during the replays. Also dangerous, when not expected.