Automobilista 2 Custom Force Feedback - Overview & Recommendations

Thank you guys for sharing your testing on AMS2 and other Sims

that’s very helpful for me TSPC owner

 

@Joaquim Pereira
@kivipallur1

My experience with TM TX is that BOOST introduces a huge amount of gain that could be offset reducing ingame GAIN. That's all for me. Not sure if it affect significantly other parameters.

Other than that, setting up a true default at Control Panel gives a mild response than setting default + zero Spring & Damper. And relatively it is much more reduced using BOOST than without.

Using ffb_custom_settings: rFuktor 5.0.1 Danielkart tune kuku tweak (#4260 @ 01-16-2022)

 

I'm glad it works for TM TX too
Bye Daniel

 

Is there a way to log the ffb signal to a text file, like we can do in rFactor 2 + motec?

 

Been away for awhile and trying to play catch up. I have T300 and I'm interested in SilverRaw rFuktor again, but I was used to seeing different levels of it depending on type of wheel you had. Looks like there is only 1 file now for all wheel bases?... is that correct? If not, I'm trying to understand what's the good starting point now for a T300?

Thanks,
Doug

 

Hi Kuku
Here is my new file 5.01. Very good for all Cars also for FWD Cars . Oscillating has also gotten better.
Bye Daniel

 

Quick test..
feels good , nice work.
i’m still a fan of 5.0.1 as a base to tune from and haven’t been tweaking much lately, but have been trying some similar changes with static force etc.

 

Just a quick question. Did you mean to leave that last line out? All the rest had both Left and Right but the last pair only had Left. I put it in. Don't know if it makes a lot of difference.

(left_bump (* 0.002 (- FL_load (smooth FL_load 0.015))))
(right_bump (* 0.002 (- FR_load (smooth FR_load 0.015))))
(left_bump_pos left_bump_pos)
(right_bump_pos right_bump_pos)
(left_bump_pos (+ left_bump_pos (* (- left_bump left_bump_pos) (power 0.001 dt))))
(right_bump_pos (+ right_bump_pos (* (- right_bump right_bump_pos) (power 0.001 dt))))
(left_bump_pos (max left_bump_pos left_bump))
(right_bump_pos (max right_bump_pos right_bump))

 

Yes i think he just needs to amend his base file. . i’ve not noticed a big difference if it’s in or out. but it’s always good to have corrected before it gets duplicated.

 

With this file, Damping Slider is actually Damping, is that correct? And Power Steering is done in the file itself? What does Power Steering Angle do? Thanks guys.

 

Danke Michael
das sollte keine auswirkungen haben, aber ich werde es prüfen
Daniel

 

Hello Michael that is correct. For my dd damping in the game is set to 0
Bye Daniel

 

Hi, I just got the game, I have a T150. Is the rFuktor 5.0.3 good for it, or should I switch to Default+ or Default. I installed one of the custom files, but I'm having problems with the FFB, namely that I can't get a good sense of grip in the medium and low speed corners, and I can't make out whether the car is sliding.
https://www.briankoponen.com/automobilista-2-thrustmaster-tmx-t150-settings/
I referred to the above guide initially while setting up my FFB
I'm currently using rFuktor 4.6 Delta S

 

Thanks for the reply. And what does the Power_Steering_Angle do?

 

I can only presume it’s a set ratio of steering assistance .
But I haven’t touched it as the steering weight always feel just right.
Later versions added extra power steering ratios for downforce compression and such, but I found they got too light in certain situations.
I guess the only way to see it’s effect is to adjust it up and down and see how the steering changes.

 

Yes, this is a calculated valve. I would not change

 

Leaving aside the other elements concerning the power steering (weight, df, speed ...) this item represents how much force the driver must apply to the steering wheel to reach the desired cornering/steering angle ... therefore the force to reach the desired angle ... ... more or less light for the same target angle

 

You can try my settings, but you should have taken into account that I'm using, not very popular and probably for some good reason, v5.0.5.

Code:

Overall Strenght: 85 %
Constant: 100 %
Periodic: 100 %
Spring: 0 %
Damper: 0 %

Code:

GAIN: 100
LFB: 50
FX: 40
DAMPING: 10

 

Thank you Stakanov
I like it better to reduce the velocity_res_scale to 0.3
Have a nice day Daniel

 

Less soft? Do you mean centering? But that is less realistic. If you like it change centering to 0.59
Bye Daniel