Bug Reports - Automobilista 2 (Read the Opening Post)

Build: 1.3.5.0 + 1.3.5.1
Track & Layout Used: Any
Car Used: DPi (but I guess is not car specific)
Applicable Settings: several pit strategies
Report: Pit stategies not available on track like others report, just would like to leave a video (

)

 

I updated the Windows and the graphic drivers, then I play for 30 minutes and the problem doesn't occur again. My video card is a Geforce GTX 1650.

 

Build: 1.3.5.1
Track & Layout Used: Any
Car Used: Chevrolet Chevette, Puma Copa Classic FL, probably other Brazilian touring cars affected.
Applicable Settings: VR
Report: Dials on the dashboard (except tachometer) dont work

 

Build: 1.3.5.1
Track & Layout Used: Any
Car Used: BMW M3 E30 DTM
Applicable Settings: Chase cam
Report: No engine sound when looking backwards

 

Build: 1.3.5.1
Track & Layout Used: Any
Car Used: Puma GT5
Applicable Settings: Cockpit cam
Report: Shift lights on dashboard do not align to redline of car.

 

Build: 1.3.5.1
Track & Layout Used: Any
Car Used: F_Ultimate_Gen2
Applicable Settings: Instant Replay
Report: After watching a lap on instant replay, many AI switch to some kind of slow motion mode afterwards when resuming race or training.

 

Build: 1.3.5.1
Track & Layout Used: Any
Car Used: F-Vintage Gen2
Applicable Settings: Cockpit cam
Report: Rear wings on F-Vintage Gen2 Model1 cars ahead disappear at 50-100 meters (cockpit view). Interestingly it does not happen during replay (cockpit view).

 

Build: 1.3.5.0.1984
Track & Layout Used: Any
Car Used: F-Ult G2
Applicable Settings: Online races - Replay Cam (trackside cam)
Report: Opponent's DRS activation isn't visible

Also, in Cockpit Cam on one's own car, when looking back (rear view) there is a small frame or two where the DRS (while activated) still shows as being unactivated. But like I say, it's only for a very brief moment, and it then shows DRS open afterwards, as normal.

 

Build: 1.3.5.1986 (but happened before many times in different builds)
Track & Layout Used: Irrelevant
Car Used: I have had it with the METALMORO AJR, Metalmoro P2, Cadillac DPi, Group C Mercedes.
Applicable Settings: not sure what matters. Damage Type = Full, Mechanical Failures = Yes. In the strategies options, Damage = Off. The selected strategy is also programed no to fix the Engine. EDITED: Single player mode, "Pit Stop Error" option does no apply.
Report: Doing a pitstop, only damage I can see is a 2% of engine wear. But the crew will do some kind of repair, hold me for about 40s and nothing visible will be fixed. There will be still 2% of engine wear when I leave

 

Build: 1.3.5.2
Track & Layout Used: Immaterial
Car Used: Multi Chassis classes
Report: When assigning driver attributes to a specific track in custom AI files only drivers within that chassis group can be changed.
This has been tested on the F1 USA Gen1 cars where Lola-Fords and Lola-Mercedes can have overriden attributes for a track or Reynards can be overriden across Ford, Honda and Mercedes engines but you can't override any Reynards if one Lola has been overriden or vice versa.
It's the same for the 2022 Stock Cars, Corollas or Cruzes but not both.

In the Super V8s there is a limit of 27 cars if the overriden values show up despite there being 30 cars in the class.

 

Build: 1.3.5.2
Track & Layout Used: NA
Car Used: NA
Report: UI issues:
1. I tried to enter a online lobby that showed not full 20/30 players but when I try to join I get a "Lobby is too full."-type message. That I think is an issue, 30/30 should be full. After that, I get a return to lobby screen but when I click on OK to return it takes me all the way back to the home menu, but I think it should return you straight back to the Multiplayer area.
2. In between lobbies it takes multiple times to click "CONTINUE" to get the lobby to the race.
3. In the Audio screen, I have about 6 audio devices listed in the "Audio Device" area, and to switch between the devices it takes multiple clicks to switch to next device, but only on a few as sometimes a single click works.
4. Nation flags still don't always show the correct country. I'm USA, sometimes I'll be UK or sometimes who knows.
5. Please add Ambient temp as a HUD option.

 

Please Add the new airport track to the stock car 22 Championship and allow for custom championship to add race 2 scoring system as race 1 has more points than race 2 in the real series. You have both options available but can only utilise one scoring system for race 1 and race 2 . Hope this makes sense.

 

An extra note on this - the issue does not arise with the F-Classic_Gen1/2/3 cars - track-specific overrides work as expected for all car models simultaneously.

 

EDIT: turns out not to be a bug. You need to select a smaller grid size (22 or less)

When multiplayer session has started and once inside the session it is not possible to select anymore the oldest tracks from Imola, Kansai, Kyalami, Monza and Spielberg. They simply do not appear for selection anymore. This has been a problem for at least a month now.

I tried verifying game files and reinstalling. This seemed to fix the double appearance of all Watkings Glen tracks. But this did not fix the above problem.

 

F-Ultima G2
Imola 2020
Flickering helmet/driver

 

Build: all builds since early this year
Track & Layout Used: all
Car Used: all
Report: when creating a custom championship if you set different starting times for P, Q and race the game only respects those start times for the first round. As soon as you exit AMS2 and then go back in it changes all the session start times to the race start time. It defeats the purpose of being able to run different sessions at different times.

 

Caldwell park is missing too.

 

Is this because you've selected a lobby size greater than the number of pit stalls on these tracks? Cadwell park is a really small number, so that probably explains that one. Don't know about the others.

 

Thanks, this indeed fixed it. Didnt know.