Automobilista 2 Custom Force Feedback - Overview & Recommendations

Discussion in 'Automobilista 2 - General Discussion' started by Karsten Hvidberg, May 30, 2020.

  1. mdecker79

    mdecker79 Active Member AMS2 Club Member

    Joined:
    Aug 3, 2020
    Messages:
    237
    Likes Received:
    170
    All of the base settings are a personal preference to what feels right to them as there is no wrong way if it feels right.

    I used to run FEI at 100 but read on here that some others turned it down so I gave it a try.

    I actually like it around 70 as it makes the tires feel a bit more rubbery when driving.
     
    • Like Like x 1
  2. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,145
    Likes Received:
    1,202
    As I said, if you are happy with it, everything is fine. I am too with my attitudes:)
     
  3. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,145
    Likes Received:
    1,202
    I already know how FEI 80% or FEI 20% and INT and NDP behave. If you look at my custom you will see that I have listed both options. FEI 80% or 20% . All satisfied:)
     
  4. Alegunner68

    Alegunner68 Well-Known Member AMS2 Club Member

    Joined:
    Dec 21, 2019
    Messages:
    701
    Likes Received:
    397
    I noticed the grainy feel is not there with wet tyres.
    Might have something to do with changes to the tyre modelling in recent updates.
    I haven't tried many cars and it's not there in all of them but I feel it most in the stock car 2022.
    I haven't got texture_vibes in my file, I'll change dt from 300 to 333 though and see what that does.
     
  5. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,145
    Likes Received:
    1,202
    Stakanov I don't think it has anything to do with scrub or tear. Unfortunately I don't have time to test it today. I tested your custom on Friday. I also noticed that when starting (accelerating from a standstill) it pulls a lot on the steering column. Of course only with higher forces with dd. If I reduce the force to about 6Nm everything is fine. I could imagine that it has something to do with the suspension or with the spring strength. Maybe it helps you, I hope it greets you:)
     
    • Informative Informative x 1
  6. Luismuku

    Luismuku Member

    Joined:
    Oct 29, 2018
    Messages:
    35
    Likes Received:
    21
    Hi, does anybody has a good profile for MMOS 2014 and this game? I'm trying different combinations with this custom files but I don't like it at all... Didn't have this problems on my TS-PC.

    The best profile I found for me is Default+, tryed with rFuktor but didn't get good result, the steering feels very tough even on a straight. Also the wheel makes a "spring force" that I hate.

    I searched profiles for MMos but is very hard to find a good one even for AC, so very more difficult to find it for this game.
     
  7. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,145
    Likes Received:
    1,202
    Hi! I don't know MMOS. Is that a dd base? If so, maybe try my file, or try Stakanov's files:)
     
  8. Luismuku

    Luismuku Member

    Joined:
    Oct 29, 2018
    Messages:
    35
    Likes Received:
    21
    It's a Diy OSW 20nm. I will try those files and post here again
     
  9. Michael Enright

    Michael Enright Well-Known Member AMS2 Club Member

    Joined:
    Jul 3, 2019
    Messages:
    1,173
    Likes Received:
    329
    I will try this ASAP. But your original V2 did it as well. For me, @Danielkart's files do it to me as well. Very strange that out of all the newer files, only your 4W Grip only mod doesn't give me this vibration/sensation.

    EDIT: Just tried with the # next to those 2 linee - No difference
    Also tried without dt2 changing anything further down in file from dt2 333 to dt 300 -
    still no change. Oh well, for now I stay with 4W Grip only file.
     
    Last edited: Apr 25, 2022
    • Agree Agree x 1
  10. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,145
    Likes Received:
    1,202
    So for me it was too much with this grit. But increasing texture_vibes corrected it for me. Maybe you have to set this value even higher if you don't use dd. And for me there are questions. Is it wrong to feel the difference between a wet track and a dry track? Is it wrong to feel the abrasion of the tires? Yes, if it's too much. No when it's toned down, even better and one of the best advances in tire physics. These are my thoughts on this, now the question arises which custom of Stakanov is "wrong"? I'll try to test again tonight. As I said, the files have not been tested since Friday. Beautiful day:)
     
    • Like Like x 1
  11. Michael Enright

    Michael Enright Well-Known Member AMS2 Club Member

    Joined:
    Jul 3, 2019
    Messages:
    1,173
    Likes Received:
    329
    So what you are saying is to increase texture_vibes no decrease? I will have to try that then, as I have only gone down up to now.
     
  12. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,145
    Likes Received:
    1,202
    Yes michael
     
  13. Michael Enright

    Michael Enright Well-Known Member AMS2 Club Member

    Joined:
    Jul 3, 2019
    Messages:
    1,173
    Likes Received:
    329
    Which line do I change
    (texture_vibes (spring texture 6000 0.025)) or
    (texture (+ texture (* 2.5 texture_vibes)))
    and to what? Thanks.
     
  14. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,145
    Likes Received:
    1,202
    spring texture 6000 0.025)) the value 0.025 to 0.6 or 0.8 or 1.0 .....
     
  15. Michael Enright

    Michael Enright Well-Known Member AMS2 Club Member

    Joined:
    Jul 3, 2019
    Messages:
    1,173
    Likes Received:
    329
    Tried it at 0.6 - better but not good
    0.8 better
    1.0 still there and not a lot better
    Seems to me to be set off by any small bump.
     
  16. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,145
    Likes Received:
    1,202
    For me it's great with 0.6. Try even higher. Maybe it's base dependent regards
     
  17. Michael Enright

    Michael Enright Well-Known Member AMS2 Club Member

    Joined:
    Jul 3, 2019
    Messages:
    1,173
    Likes Received:
    329
    Been up to 2
     
  18. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,145
    Likes Received:
    1,202
    shame if it doesn't work for you. But at least a little better than you wrote:)
     
  19. Michael Enright

    Michael Enright Well-Known Member AMS2 Club Member

    Joined:
    Jul 3, 2019
    Messages:
    1,173
    Likes Received:
    329
    I've tried changing all the other settings around texture_vibes as well but still can't stop it. I have also tried changing settings on the wheel as well as Fanalabs. Still the same. Gone back to the old 4WGrip only mod file again. That one does not do it at all, not even with the Stock Cars.
     
    • Informative Informative x 1
  20. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,145
    Likes Received:
    1,202
    I tested it again. It's really too grainy and increasing the value doesn't help much. I don't have this problem with my custom, but I can't say what it is either. Stakanov do you also have Michael's problems with your base? Would be interesting to know. Unfortunately I don't have a solution at the moment either. But I will post my custom later, because I got a very good idea from a member of the forum that I was able to expand and expand. The result is a fantastic tire feeling. If you like it you can put it in Stakanov's files, of course Stakanov has to like it himself. Just try it:)
     
    • Informative Informative x 1

Share This Page