Bug Reports - Automobilista 2 (Read the Opening Post)

Version: 1.4.5.2
Track & Layout Used: Daytona RC
Car Used: DPi GTE
Applicable Settings: Single Race
Report: pit speed stuck at 37mph
Steps to reproduce: Start a session

 

Version: 1.4.5.2
Track & Layout Used: Long Beach , RA, ALL
Car Used: mostly CART cars, less in other body cars, tires
Applicable Settings: Test session or Single Race
Report: Debris left on track, tires, parts
Steps to reproduce: Start a session run until there’s a crash, come back around and tires parts stay on track, cars can hit the debris and cause damage

 

No drivers with Classic Gen 1, 2 and 4 when using custom liveries.

 

Version: 1.4.5.2
Track & Layout Used: any
Car Used: McLaren MP4/5b, McLaren MP4/6
Applicable Settings: any
Report: the car hud shows mph instead of kph
Steps to reproduce: drive the cars

 

Nissan R390 GT1

The very first tame you drive it out of pit with pit limiter on
the RPM is 3700, if you then go back to pit and change ex.
brakebias and go out with pitlimiter on the RPM is 3300, so
someway the finel ratio has change !?

 

Version: 1.4.5.2
Track & Layout Used: Daytona Oval
Car Used: Nissan R89C LDF
Applicable Settings: Single Race
Report: CTD
Steps to reproduce: Start a session
Tried it a few times, same thing every time = CTD once the loading bar finishes, don't know if it's reported already. I did send a Bug Splat.

 

It can be adjusted there , just doesn’t stay when I hit pit road. Now I rebooted the game but not pc. I first test (always do new cars) at Long Beach and it’s speed limit is 37. I will be back on later to see

 

Version: 1.4.5.2
Track & Layout Used: various such as Brasilia, Gateway, Cordoba
Car Used: various such as Formula Classic Gen 3 & 4, Copa Classics
Applicable Settings: Starting Grid Position = Last, various field sizes, such as 24 and 30
Report: user starts from near the back of grid but there are now always a couple of AI cars starting behind
Steps to reproduce: start any single offline race with no qualifying session and Starting Grid Position = Last

 

I'm also always finding the car resets to Chevy Cruze Stock Car 2022 whenever I go back to the Single Race page, no matter which car I had previously been racing.

Edit: to clarify - this happens when I've been in a race, then go Back to the AMS2 main page, then back into Single Race page - the car is always reset to Chevy Cruze 2022.

I'm not using any of the new Presets. I've also tried deleting the Documents>Automobilista 2 folder, but the problem persists. All other settings seems to remain intact, just the car choice always gets reset to Chevy Cruze 2022 for me.

I've noticed it only since the 1.4.5 update.

 

Version: 1.4.5.2
Track & Layout Used: Monza'91, Hockenheim'88
Car Used: Nissan R89C (Low Downforce)
Applicable Settings: None
Report: Game crashes during loading screen
Steps to reproduce: Select the Nissan Group C car, take it to a Low Downforce track, and attempt to load the game.

 

Version: 1.4.5.2
Track & Layout Used: Monza (1971 no oval)
Car Used: Formula Vintage Gen 2 Brabham BT26A (the specific car the AI that I saw experiencing the issue was driving)
Applicable Settings: race
Report: AI is unable to pit when pit limiter is set to 200kph, will instead just drive through the pit box
Steps to reproduce: start a race at 1971 Monza with a pit speed limit of 200 kph and race/spectate until the AI needs to pit (AI strength at 120 and aggression at high). AI will not pit and instead drive through pit lane

 

BT62 at any track, ABS and TS will permanently set to 0 after you restart a Test Day.

 

With all respect, Crimson, but I am a creator of custom liveries myself. The liveries are still there. But the cars have no drivers inside. As Reiza obviously changed something without telling us, there is nothing a creator can do without any information. The drivers in the car are still the standard ones, as there was no possibility to modify them yet.
And this bug only occurs in Formula_Classic, no problem with other classes.
So, not us, the creators, must change something but Reiza has to fix the bug or give us information what they have done within the structure.

 

new build join any server in multi, all controls are unresponsive
Join another server all ok
Join another server no controls ,it just repeats itself
And yes deleted my documents

 

The AI files has nothing to do with livery overrides... It only points the drivers to the correct livery...

What we need is this post updated...

AMS2 - User Livery Overrides

There is no up to date information on the new helmet for the new classic's and there's no information on the new driver suits... (I understand the time constraints so can wait but this is separate to the bug itself)

The bug is created because the livery override xmls only have livery overrides in them and are not trying to override the helmets or driver suits...

The missing overrides cause the helmets and suits to disappear...

 

Can't get them working