[WORKAROUND] Logitech G923/G920 steering lock stuck at 180°

Discussion in 'Automobilista 2 - Help & Support' started by CrimsonEminence, Jul 29, 2023.

  1. CrimsonEminence

    CrimsonEminence Administrator Staff Member AMS2 Club Member

    Joined:
    Nov 4, 2018
    Messages:
    9,788
    Likes Received:
    9,849
    In case you have issues with Logitech G923/920/GPro and steering lock being stuck at 180° in/after calibration it's recommended to try out the workaround linked in this post, until a proper solution has been applied:

    Automobilista 2 V1.5 Officially RELEASED - Now updated to V1.5.0.2

    If it doesn't apply the correct DOR still, please do this step:
    Alternative potential workaround:

    Go to your steam library, open properties of Automobilista 2 and enter the launch command

    -disableTF

    to the launch command bar at the bottom of the "general" section.
     
    • Useful Useful x 5
    • Informative Informative x 1
  2. Dmand

    Dmand Active Member

    Joined:
    Oct 3, 2022
    Messages:
    216
    Likes Received:
    74
    Also happening on the Logitech G pro wheel. I'll try these steps thanks.
    It seemed to be working fine after the update, then G-hub updated and the problem came to life.

    Every time that G-hub program updates, i get a eek in my soul.
     
    • Informative Informative x 1
  3. Dmand

    Dmand Active Member

    Joined:
    Oct 3, 2022
    Messages:
    216
    Likes Received:
    74
    This does not work with the G pro wheel.
    -disableTF causes crazy force and is not usable.
    Tried all ffb profiles including custom

    I can calibrate the wheel but every car is still stuck with the physical wheel turning about 100 degrees both ways.
    The steering wheel you see in game does not line up and turns its full lock.

    Any eta on a fix?
     
  4. Dmand

    Dmand Active Member

    Joined:
    Oct 3, 2022
    Messages:
    216
    Likes Received:
    74
    Ok, i got it working.
    G pro wheel must be in g923 mode.
    In game controller profile must be in G923 mode.

    Doing that made the workaround step work.

    I hope the Gpro wheel will be officially supported in the future. Using that wheel in Gpro mode breaks the side tabbing navigation in menus. Plus it would be cool to get the full details of this wheel. In G923 mode i guess we are missing out on some details, so i hear.
     
  5. Tenebur

    Tenebur New Member

    Joined:
    Aug 9, 2023
    Messages:
    5
    Likes Received:
    1
    I have tried the alternative solution of the "-disableTF" command at the start of Steam, and I have recovered the 900º rotation of the G923.
    Works!!
     
  6. Juan Pelizzari

    Juan Pelizzari New Member

    Joined:
    Jul 11, 2022
    Messages:
    14
    Likes Received:
    1
    Confirmed. It works.
    Reiza please fix it with a new official update
     
  7. newtonpg

    newtonpg Active Member AMS2 Club Member

    Joined:
    Dec 29, 2018
    Messages:
    661
    Likes Received:
    207
    :whistle:
     
    • Funny Funny x 1

Share This Page