Automobilista bug report thread (Please read the opening post)

Discussion in 'Automobilista - General Discussion' started by Renato Simioni, Aug 25, 2016.

  1. alexSchmurtz

    alexSchmurtz Active Member AMS2 Club Member

    Joined:
    Mar 8, 2016
    Messages:
    381
    Likes Received:
    197
    Yep, that should hardly put memory on its knees! :D So it looks like it's not you, and that it is fixed: you just have to be patient now, and wait for the next update! :)
     
  2. Sektor

    Sektor Member

    Joined:
    Apr 7, 2017
    Messages:
    44
    Likes Received:
    11
    Just in case it hasn't been posted before, i haven't gone trough all the thread.
    Track & Layout Used: any with a long straight, stock or mod
    Car Used: F 309 and F 12 (probably works with all cars)
    Applicable Settings: test day with AI
    Report: AI will try to slipstream you if you are on a straight regardless of your speed, like when you get out of the pits or when you spin and start returning to track. They go behind you and sometimes ram you.
    Steps to reproduce: Any
     
  3. PieroX

    PieroX Active Member AMS2 Club Member

    Joined:
    Nov 24, 2016
    Messages:
    115
    Likes Received:
    39
    When doing a time trial with Copa classic - Cat B, if you use Passat Brock or Uno Bala, the leaderboard will be Cat FL's leaderboard. When using Cat FL Gol sueca, the leaderboard will be Cat B's leaderboard.
     
  4. Lorencini

    Lorencini Luciano Lorencini AMS2 Club Member

    Joined:
    Oct 10, 2016
    Messages:
    529
    Likes Received:
    381
    Ultima Race
    When leaving pit faster than the speed limit, player receives a penalty in credits (the same way rfactor 1 does). Only happens with Ultima (I tested Ultima Race, didn't check other versions).

    GRAB_069.JPG
     
    • Agree Agree x 1
  5. Lorencini

    Lorencini Luciano Lorencini AMS2 Club Member

    Joined:
    Oct 10, 2016
    Messages:
    529
    Likes Received:
    381
    When I choose cockpit option in Options menu, it overrides every change I make in cars' Showroom. So far, so good.

    But this is preventing at least two things:

    1 - I can't use the optional interior in SuperV8
    2 - I can't use the optional wheel in Formula 3

    Even if I go at Showroom and select theses options, they don't load on track.
     
    • Agree Agree x 2
  6. Wayne Whitmore

    Wayne Whitmore Active Member AMS2 Club Member

    Joined:
    Apr 26, 2017
    Messages:
    382
    Likes Received:
    98
    Formula Vee suspension still not connected to the car. Rear shocks not connected at the top bracket and poke through the bracket as well. Front of the rear lower control arms also not connected the car. This has been the same for a very long time now. GRAB_001.JPG
     
  7. Wellington Costa

    Wellington Costa New Member

    Joined:
    Mar 17, 2016
    Messages:
    7
    Likes Received:
    0
    I'm having a problem, in this latest update released on 25/11/2017. The menu screen has this problem of displaying a barcode instead of the written options. The problem does not occur when you are on the track where words and numbers are visible in windowed mode and full screen mode at track, but not in menu screen. I have already changed the language from EN-US to EN-US and the problem remains, is there a solution without losing my PLR and my settings?
     

    Attached Files:

    • erro.png
      erro.png
      File size:
      881.9 KB
      Views:
      821
    Last edited: Nov 26, 2017
  8. Alex Sawczuk

    Alex Sawczuk Well-Known Member AMS2 Club Member

    Joined:
    Feb 14, 2016
    Messages:
    1,022
    Likes Received:
    857
    What windows settings for language, keyboard do you have etc. Can you try creating a new please just incase it fixes it? We can compare the two plr files and see what's the difference.
     
  9. Wellington Costa

    Wellington Costa New Member

    Joined:
    Mar 17, 2016
    Messages:
    7
    Likes Received:
    0
    My native language as well as the keyboard and Windows settings is PT-BR, and my AMS is in PT-BR, . However following the recommendations, I was able to create another profile in AMS to test and the error persists. I even changed the game language to EN-US and ES and the error persists. I saw the two PLR files and it did not make any difference whatsoever regarding the menu and language of the game.
     
  10. Morello

    Morello New Member AMS2 Club Member

    Joined:
    Mar 9, 2016
    Messages:
    11
    Likes Received:
    0
    Track & Layout Used: Velo Citta
    Car Used: Lancer RS
    Applicable Settings: 15 lap race, all fuel usage, track usage etc on default / real-time
    Report: Fuel usage seems to be incorrectly estimated in 1.4.9 - I did a 15 lap race in the Lancer RS against AI, and despite taking what the game said was enough for 18 laps, ran out with 3 laps left. The AI did as well. May be coincidence, but I know the new estimation gives it over a rolling 5 laps, and I ran out 5 laps before I should have.
    Steps to reproduce: Start a race as above.
     
  11. pixeljetstream

    pixeljetstream New Member AMS2 Club Member

    Joined:
    Mar 24, 2016
    Messages:
    9
    Likes Received:
    1
    1.4.9
    Track: Spielberg national
    Car: V12. Cockpit cam
    Setting: maximum graphics settings, Multiview. Nvidia 1080. Win10
    Bug: setting early time of day 9:30 or so, causes the grand stands left of starting straight to cast shadow on track (which is expected). The bug is that the shadows pop out too early. It looks like the shadow mesh gets frustum culled too early or so. When driving over the grid, every couple 100 m, a section of the track becomes briefly fully lit instead of in shadow. The other stand objects remain to cast shadow, just the one passed bye looses its shadow too early.
     
    Last edited: Nov 26, 2017
  12. Emerson Barina

    Emerson Barina New Member

    Joined:
    Nov 27, 2017
    Messages:
    7
    Likes Received:
    1
    I have a problem after updating to version 1.4.9.
     

    Attached Files:

    • Like Like x 1
  13. Mooney

    Mooney New Member

    Joined:
    Nov 5, 2016
    Messages:
    1
    Likes Received:
    0
    Hi, Buenos Aires No. 7. layout do not work, error and quit. Thx!
     
  14. Alex Sawczuk

    Alex Sawczuk Well-Known Member AMS2 Club Member

    Joined:
    Feb 14, 2016
    Messages:
    1,022
    Likes Received:
    857
    @Emerson Barina @Wellington Costa

    Go to SteamLibrary\SteamApps\common\Automobilista\Support

    and run AMSFontsInstaller.exe, restart the PC and let me know if that helps.
     
  15. lip.balazs

    lip.balazs New Member

    Joined:
    Dec 29, 2016
    Messages:
    7
    Likes Received:
    6
    Buenos Aires No. 7. layout doesn't work.
    +
    And the Metalmoro AJR -> Chevy V8 -> JLM Racing -> Stefan Meyer car has Judd V10 Engine instead of Chevy V8.
     

    Attached Files:

  16. Emerson Barina

    Emerson Barina New Member

    Joined:
    Nov 27, 2017
    Messages:
    7
    Likes Received:
    1
    I already had this procedure, but it did not solve the problem.
     
  17. Alex Sawczuk

    Alex Sawczuk Well-Known Member AMS2 Club Member

    Joined:
    Feb 14, 2016
    Messages:
    1,022
    Likes Received:
    857
    And if you go to C:\Windows\Fonts is "Titillium Web" installed?
     
  18. Emerson Barina

    Emerson Barina New Member

    Joined:
    Nov 27, 2017
    Messages:
    7
    Likes Received:
    1
    Yes
     

    Attached Files:

  19. Alex Sawczuk

    Alex Sawczuk Well-Known Member AMS2 Club Member

    Joined:
    Feb 14, 2016
    Messages:
    1,022
    Likes Received:
    857
    Those are the basics, I don't know what else is causing the problem, it works on 99.5% of PC configurations, so I need you to find some information for me to help really.

    What language settings are you running? Is there something strange about your Windows Install etc? I don't really know what would cause it tbh...
     
  20. phoenix7337

    phoenix7337 New Member AMS2 Club Member

    Joined:
    Sep 20, 2017
    Messages:
    9
    Likes Received:
    2
    hello, since the 1.4.9 update, I have several errors, the first one:
    -The marches are automatically up and down, they are changed alone, it is not set to automatic, always play without aids
    second:
    -many times, when I'm going to enter the track from configuration, the message appears: that the game stopped working and throws me out, METALMORO, INTERLAGOS, TIMETRIAL
    Thank you for your attention, greetings
     

Share This Page