Bug Reports - Automobilista 2 (Read the Opening Post)

This also happens with the vintage touring car tier 2 Mini Cooper.

Any track, just corner hard and both front and rear tyres are visible through the upper part of the wheel arch of the outside wheels.

All the best
Andy

 

Track & Layout Used: Silverstone 2001 GP (anywhere actually)
Car Used: Formula Hitech Gen 2 Model 3
Applicable Settings: Any
Report: Auto upshifts don't match the power curve of the car. It's shifting at the redline, while the max power is achieved at 10700 RPM with 687 HP, dropping +20HP by the shifting point and obviously a lot of torque with it. Found out right before a league race while checking data, and gained an edge by shifting at the third green light manually all race. I would guess the problem is a wrong power curve rather than how the autoshift works, as it gives the engine an advantage on heat generation and fuel consumption: acccording to what I can gather by googling, the power should keep on rising and reach either 710 or 725 HP, depending if the spec represented is the HB7 (engine since San Marino 92) or HB8 (since Germany 93).
Steps to reproduce: Drive the car with either the Telemetry HUD on to check power output live, or use a data recording app like Second Monitor and check the results.

 

Problem: Mandatory pits not working
Track & Layout Used: Oulton Park
Car Used: GT4
Applicable Settings: Mandatory Pit Stops, with 2 and 0 tires needed.
Report: When it was set to 2 tires, I ended changing all 4s because there is not such option in the in-game menu (select which/how many tires). Got disqualifieded instantly in the last lap as I decided to ignore the sign.

When no tires needed, just the mandatory stop. I pitted, refueled and went away thiking that it should have been enough
Got called by box for the mandatory pit in the penultimate app;
Went to the pit, did nothing/not changed any setting (it may have refueled something, but I did not choose), got DQ instantly again while crossing the line in the pits.

Steps to reproduce: Just set a race with mandatory pits.

_________________

Problem: Flags not working (mainly yellow)
Track & Layout Used: Oulton Park
Car Used: GT4
Applicable Settings: All penalties applicable turned ON. Later with FCY Enabled.
Report:
After some incidents and accidents, no flag, not a single yellow, neither with me or the AI crashing.

Once I turned ON FCY, it happened once on a big accident, but that was it.

No SC ever.

Blue flags showed up, but IA was fighting for positions anyway and kind of ignoring it (same class, lapped after pit stop)

No white flags on last lap;

Whislist: 3D Marshalls with flags, at least on the start line.

Steps to reproduce: Race with all penalties enabled.

__________________

Problem: ABS and TC not selectable
Track & Layout Used: Oulton Park
Car Used: GT4
Applicable Settings: Authentic Settings for Assistances
Report:
After a whole afternoon doing tests with settings (game and session), at one point my Mclaren GT4 wasn't able to change TC and ABS settings, which were OFF.
Checked multiple times in the in-game menu and the setting was set to authentic.
After closing the race, going back to main menu, cheked again, made a cycle of Authentic => Off => Authentic, started a new session, all fine.

Steps to reproduce: Didn't try actually to reproduce, but the problem appear after I set the gears to automatic and clycled throught other options (without changing them in the end). Never raced without the Authentic setting set.

 

Problem: No Playermodel on Replay with Hands/Wheel off Option
Track & Layout Used: Oulton Park
Car Used: GT4
Applicable Settings: Hands/Wheel Display Off
Report:
Turn Off the 3D representation, but the setting interferes with the race replay, as you can see from the onboard cam picture below.
As you are adding more angles with the update, better check that.

Didn't test with an "offline" replay (when you save and play it from the menus)



Steps to reproduce: -

 

Track & Layout Used: Interlagos Kart 1, 2 and 3
Car Used: Any
Applicable Settings: Any
Report: The Shared Memory telemetry incorrectly identifies the track variation/layout as 'GP' for all three Kart layouts (Kart 1, 2, and 3).

 

Track & Layout Used: Any
Car Used: Any
Applicable Settings: Triple screen
Report:
On 1.6, triple screen settings can't be saved.
I can change values, but won't save. Restart does not help either

 

UI says Audi V8 Quattro has no headlights, even though it absolutely has.

 

Track & Layout Used: Any
Car Used: Any
Applicable Settings: Any
Report
Lamborghini sc63 is missing all of its liveries. The car appears red no matter which livery i choose.

 

The Ligier has it's TT LB locked at Sebring (LMP2 G2)

 

Have had mods/liveries installed before the update?Looks like it.

 

Track & Layout Used: Irrelevant
Car Used: Irrelevant
Applicable Settings: Irrelevant
Report: Fanatec Clubsport Formula V2.5 rim - some buttons getting the "Multiple inputs detected" error when trying to change assignments. Same buttons worked fine previously.
Steps to reproduce: Go into controller mappings and try to map the right hand tactile switch down button (red up/down), and some others, to anything that's mappable to a button.

 

Track & Layout Used: seems to happen in any track
Car Used: SC63
Applicable Settings: any
Report: No livery loads once on track only shows as red
Steps to reproduce: steam deck load sc63

 

Track & Layout Used: Spa
Car Used: GT3 Lambo Evo , single race, AI at same class.
Applicable Settings: Weather - Fine
Report: At skill 95 the top 2 or 3 AI drivers are doing 2:12s and 2:13s when me and all other AI are doing 2:21 (in practice and qualy, single race).
Steps to reproduce: single race, AI at 95.

 

Track & Layout Used: Any
Car Used: Any
Applicable Settings: Any
Report: v1.6.3, drone camera in photo mode still gets stuck on nothing Unsure if it should be limited to a certain range of the player car or not, but very annoying regardless. Please address this, as it's been an issue for a while now.
Steps to reproduce: Go into any replay, or any session, switch to Drone camera, move around with keyboard and mouse. See video for example.

 

Car : Lamborghini LMDh : Bug : The cars have no livery , all the same red color

 

Track & Layout Used: Any track
Car Used: Any
Applicable Settings: Manual engine start
Report: Engine does not start when pressing the button. However, the button does work when engine start is set to automatic.
(Logitech G29)
*edit: clutch works fine after restart.
Edit2: is it true that it was always impossible to manually start the engine in for the first time in the pits???

 

-

 

Track & Layout Used: Mosport
Car Used: Alpine A242
Applicable settings: Any
Report: Experiencing performance drops throughout Sector 2 and the beginning of the back straight. FPS drops from 70 to 55.
Steps to reproduce: Drive the Alpine or any other car on mosport and keep an eye on the fps through sector 2 and at the Moss Corner.

 

This was previously reported, but mentioned as fixed in 1.6 so I'm reporting again
Track & Layout Used: Any
Car Used: Formula Vintage GenII
Applicable settings: Any
Report: Version 1.6. In replays, the car still has very high positive camber and ride height is high.
Steps to reproduce: Watch a replay with cars from this class.
Attached photos for reference and comparison.

 

Please understand that i would have thought of it before posting. Also, lambo just came out and there are no liveries for it. Anyway looks like other people are having this issue too.