Automobilista 2 Custom Force Feedback - Overview & Recommendations

Hi I have tested the new settings and they are great I have a question in regards to wheel speed i use a R12 in your settings you recommend 180 to 200 but for small light wheels 100 to 120 can you suggest what should be used for GT3 LMDH which is what I generally do and I use the FSR wheel and the GSV2.

 

Excellent, thank you, I will have a play around with it!

 

I run a Moza R21 but with wheels from other manufacturers. Now it's the case that you can't change the inertia (Natural Inertia) with "Not Moza Wheels". Since I have larger and heavier wheels, I can bring more liveliness to the wheel with "Maximum Wheel Speed". This setting actually causes attenuation the deeper you go. So for light, small wheels it is better to reduce this value to get less vibration and simulate a heavier wheel. In the file I described it like this:

Maximum Wheel Speed: 180%-200% (For small, light wheels set the value to 100-120%)

It is therefore a compensation for "Natural Inertia" because I don't use an original Moza Wheel

 

Thank you for your help here is what made sense to me please tell me if I am wrong with this line of thinking but fir formula and gt style racing wheels use your recommendation of 120 on more heavy wheels like round style increase it to 180 - 200 please let me know if I'm wrong with this.

 

Merci pour les fichiers ffb it's ok for fanatec csl dd 8 nm?

 

Daniel, thank you very much. I drove 1.6 with Extreme 2 all day yesterday, today I drove all day with Extreme 3 and this is even better & feels much more realistic and natural than the original FFB settings. Also it is not oscillating at all, a big advantage for me and my Moza R9 base.
Great work & spot on!

 

Yes, you got it right

 

Thank you that makes a change that I right that dose not happen very often Thank you for the continued work

 

THX and the modification in the 2 resistence based on the velocity improves exactly the feature you are looking for
(velocity_res_scale 0.300)
(velocity_res_offset 0.700)

Perfect, and yes kerb is an absolutely personal choice, for example I was trying now a level around 4.80 ... very near

 

This was a very good tip from you!I tested it and a beginner dd base works better with the belt base, that is, with the 2nd file.Although they are dd bases, the low power is more important here.I will include the following bases in the belt file:

Fanatec csl dd 5 Nm
Moza R5 dd base 5Nm
Cammus C5 dd Base 5Nm

I will change it shortly and expand the belt file with the weak dd bases and write an addendum

 

Hi,
in the txt it says
# For Fanatec Clubsport DD Base 12Nm
...
# INT: OFF (For 2nd Option 3-4)
# FEI: 40% - 50% (For 2nd Option 80%)
...

What do you mean by 2nd Variant?
Thank you

 

File on page 444 V6000 extreme3 has been updated

 

These 2 filters INT and FEI allow 2 options at Fanatec. Test both variants to find your preferred one That means:

INT: OFF for 1 variant
FEI: 40% - 50% for 1st variant

INT: 3 to 4 for 2nd variant
FEI: 80% for 2nd variant

 

Daniel Thank you very much, one question only about kerbs hits hard even on Fx-14

 

Reduce this value (kerb_bump_scale 6.00) to around 4.00
This should help with very high curbs

 

Hi to all ,

Can you suggest any changes I can make so that my Sf1000 with T818 does not swing too much in a straight line? It happens to me even when the car is stationary .This is my file txt

 

Nothing, I spent some time on V6000 Extreme 3 but unfortunately even this time I didn't get the sensations I was hoping for even though I had the same steering wheel and used the recommended settings, the pleasant feeling is that of the absence of oscillations and the sense of rubber, but the remaining sensations are always of grip, I don't feel any slipping and the yaw, lateral and longitudinal movement is practically absent, furthermore, as I wrote the other times, I feel something strange in the rotation of the steering wheel that I don't feel in all the other files.
I apologize for the feedback and I hope it's not me who's doing something wrong, but Mr. @Danielkart are we sure that there isn't something different or incorrect in your files compared to the others?Ratio scale, degrees of rotation, slipping...

 

Hi ,
in game , gain is 5% or 50% ? 5% seems low ..... Thanks

 

To each his own, take files that you like better, there are plenty of other modders or the defaults from Reiza

 

I use them of course but I was hoping to understand if the limit was mine or not, thanks anyway.