Bug Reports - Automobilista 2 (Read the Opening Post)

Version: 1.6.6.1
Track & Layout Used: Any
Applicable Settings: Multiplayer Race Weekend
Car Used: Any
Report: Some race settings are not displayed correctly in the lobby.
- When pit speed limit is set to 240 km/h, some people see 240 km/h, some others 60 km/h in the same lobby at the same time.
- Pit Stop Refuelling is allowed but displayed as "no".
- Plus the old PC2 bug: A race that is set to e.g. 60 min race length gets displayed as 60 laps.

We are always on a dedicated server - don´t know whether this also goes for P2P setup.

 

Version: 1.6.6.1&2
Track & Layout Used: Any
Applicable Settings: Singleplayer Race Weekend
Car Used: any GT3 Gen2
Report: Lap Counter doesn`t work on Cockpit-Dashboard

 

Version: 1.6.6.2
Track & Layout Used: Any
Applicable Settings: Any
Car Used: Ligier JS2 R
Report: After the 1.6.6.2 hotfix the Ligier JS2 R windshield (or the decal) has shrunk or shifted and there's now a 1px gap all around which wasn't there in 1.6.6.0/1.6.6.1.

Also note that both the Aston Martin GT3 EVO & Vatange GTE have the same issue since they were released (unlike the Ligier JS2 R which was fine until version 1.6.6.2)

 

The non EVO 720S GT3 has the same LOD issue at an even closer distance from the player. The subsequent LOD further away is correct .

 

Version: 1.6.6.1
Track & Layout Used: Road America
Applicable Settings: Race
Car Used: All I think but certainly the Formula and Endurance stuff
Report: The AI has always driven a very odd line through turn 11. They dont hit the Apex and turn sharply - 'defying physics' (Red line on image). This makes it impossible to follow them, or race them. If you do follow them, you'll crash out.

 

Here's a video captured before 1.6.6.2 when there was no gap.

 

Version: 1.6.6.2
Track & Layout Used: Any
Applicable Settings: Any
Car Used: Any
Report: Car camera keeps defaulting to bumper cam, I can change it back to cockpit but every time I enter the car, it's reverted back to bumper cam. This has only started since last update.

 

Version: 1.6.6.2
Track & Layout Used: Gateway Oval
Applicable Settings: Time Trial Mode
Car Used: F-USA 2023
Report: The position of sectors for S2 and S3 on the minimap is incorrect. The sectors are actually farther apart. S2 being just before the exit of Turn 1, and S3 being farther away, at the beginning of Turn 3. The sectors are not on the back straightaway, as currently shown.

 

Version: 1.6.6.2
Track & Layout Used: Gateway Oval
Applicable Settings: Time Trial Mode
Car Used: F-USA 2023
Report: Sometimes, crossing the start/finish line for the first time (after the first left turn) does not trigger lap timer nor the ghost cars.

 

Indeed.. MSAA is the problem. Enabling any level of MSAA is triggering the issue.

To me it looks like the MSAA implementation has issue with transparent materials (the windshield in this case) and is incorrectly sampling pixels which are on the other side & normally occluded by the mesh.

Can't remember if this was present in PC2 on PC (it wasn't on consoles for sure). Edit: Just checked PC2 on Xbox SX and it's the same..which means that the MSAA implementation in the Madness Engine has always been dodgy from the get go.

4K No MSAA:

4K MSAA:

 

Version: 1.6.6.2
Track & Layout Used: Any
Applicable Settings: Any
Car Used: Audi R8 LMS GT4
Report: I think that's this has always been an issue....but the side mirror (or the background) is clipping/leaking through the carbon

 

Version: 1.6.6.2
Track & Layout Used: Donington Park GP
Applicable Settings: Online Multiplayer in LFM, Qually dry then Race is raining (random weather)
Car Used: Alpine A110 GT4 Evo
Report:
After qually when I go to the race, my setup was modified after I save it (i show that part in the video)
I've also informed LFM but they say they will not take any actions related to gameplay bugs.
This is very frustrating.
Trying to describe what happened in the video, and I also showcase it in many ways, but basically after qually I change small things (cooling and pressures) and save the setup w a diff name (related to the new temps). Then I notice it's raining and I go to change from slicks to automatic.
When the race starts I missclick the engine power button and I turn the car off and then back on, which is an error on my part because I was trying to turn wipers on.
But then when I finally start racing, what would have been a nice recovery race since this time no one hit me on the grid... My gears all finish at 140kmh top speed. Which then only leaves me to DNF, lose -130 ELO. Luckily this was not a "make it or break it" race for the GT4 Champ like the bug from last week, but still quite upsetting since this can happen in any race.
So I'm posting it here hoping this gets fixed...

 

Version: 1.6.6.2
Track & Layout Used: VIR Full (But I'm assuming issue is independent of that)
Applicable Settings: Pitstop with the GT4 cars
Car Used: Aston Martin GT4
Report: Aston Martin GT4 car is able to refuel and change tyres simulataneously during a pitstop. The other GT4 cars (at least the McLaren, Alpine and Audi) will only change tyres after the refueling has completed.

 

Version: 1.6.6.2
Track & Layout Used: Watkins Glen with inner loop
Applicable Settings: custom race weekend
Car Used: GTE and GT3 Gen2 -- 48 cars
Report: Several pit slots are used twice, starting with slot 21 till 36

 

Track & Layout Used: Monza gp (seems to happen in any track)
Car Used: F3 Dallara (+other cars I’ve tried)
Applicable Settings: VR mode
(other settings seems irrelevant)
Report: mirror positions set by user not saved by sim , eg each time use sim user has to annoying reset mirror angles .
Steps to reproduce: as above

 

Version: Lastest Version
Track & Layout Used: Nordschleife 2020
Car Used: Alpine A110
Applicable Settings: Any
Report: The car is full of fuel, but the number of laps that can be driven is only 3 laps. In reality, I can drive more than 3 laps. It seems necessary to modify the number of laps that can be driven according to the amount of fuel.

 

Version: 1.6.6.3.2927
Track & Layout Used: Any
Applicable Settings: Any
Car Used: Aston Martin Vantage GT3 Evo
Report: There is a problem with the Aston GT3 override, some parts of the car, which are painted in the original skins, have a carbon texture when we apply our paints, the rear wing, a part below the rear window and another below the doors, for example.

 

Version: 1.6.6.3.2927 AVX
Track & Layout Used: Any
Applicable Settings: Auto-shift driving aid with auto-clutch
Car Used: Any, especially problematic with fast cars (F1, hypercars, etc.)
Report: Under heavy breaking the auto-shift driver aid is shifting down into neutral, which can very easily cause the car to spin. This happens especially with F1 cars and hypercars. It also happens with slower cars like GT4, etc. if I stay on the brakes but doesn't cause easy spins with those.