Bug Reports - Automobilista 2 (Read the Opening Post)

Discussion in 'Automobilista 2 - General Discussion' started by Heitor Facuri Cicoti, Apr 4, 2020.

  1. markku oksanen

    markku oksanen New Member

    Joined:
    Dec 31, 2022
    Messages:
    2
    Likes Received:
    0
    On a wet track, the water jet coming from behind the cars looks, especially when driving in the dark, as if the cars are using rocket fuel, i.e. the water jet seems to come in explosions from behind the car. Could it be possible to get a steady spray from it? I also have rf2 and lmu where the water spray looks natural. ACC has the same problem as AMS 2. Is the problem caused by the graphics engine? Otherwise, the new update is good.
     
  2. DiggerHawk

    DiggerHawk New Member

    Joined:
    Oct 1, 2024
    Messages:
    5
    Likes Received:
    1
    Track & Layout Used: Any
    Car Used: Porsche 963
    Applicable Settings: Any, its visible in the showroom so I'm guessing its the highest LOD model.
    Report: Graphic glitch affecting the reflections on the right rear bumper, below the rear wing. Looks to me like an issue with the 3d model normals. You can see spikes in the reflections, not a big deal but once you notice it you can't unsee it. The left side is unaffected so it is not just the geometry of the car.
    Steps to reproduce: Look at the car on track or in the showroom.

    ss215935.jpg

    ss180709.jpg
     
  3. NexxusDrako

    NexxusDrako New Member

    Joined:
    Nov 24, 2024
    Messages:
    4
    Likes Received:
    0
    Track & Layout Used: Adelaide (seems to happen in any track)
    Car Used: TSI Cup
    Applicable Settings: All?
    Report: Tyres glitch out randomly.
    Steps to reproduce: Drive the Polo or any other TSI cup car, and go hard into one of the square turns.
    Forum thread: Odd tyre glitch
     
    • Funny Funny x 2
  4. Steve Hicks

    Steve Hicks New Member

    Joined:
    Feb 21, 2024
    Messages:
    6
    Likes Received:
    5
    All I can say is that it worked for me, by removing/deleting all the custom livery files so there was no trace of them, uninstalled the game, reinstalled a fresh copy so all the cars only had their default liveries and this worked for me. Took a long time to reload all the custom liveries back in though, not sure if it’s a bug or not, it’s a big update maybe it didn’t like something in the custom files.
     
    • Like Like x 1
  5. dryheat94

    dryheat94 Well-Known Member AMS2 Club Member

    Joined:
    Sep 16, 2021
    Messages:
    598
    Likes Received:
    286
    Settings display _NONE_ in secondary locations for TC+/- instead of blanks.

    1066890_7.jpg
     
    • Agree Agree x 1
  6. noel spence

    noel spence Member AMS2 Club Member

    Joined:
    Jul 4, 2019
    Messages:
    127
    Likes Received:
    18
    loss of all controls in multiplayer ,have to restart game its happening a lot
     
    • Agree Agree x 2
  7. TacticalNuclearPingu

    TacticalNuclearPingu Active Member AMS2 Club Member

    Joined:
    Jan 3, 2022
    Messages:
    100
    Likes Received:
    120
    Track & Layout Used: Hockenheim GP
    Car Used: LMP2
    Applicable Settings: Rolling start in MP (LFM)
    Report: People jumping the rolling start or restart
    Steps to reproduce: Throwing this here as it relates to the game mechanics rather than being an LFM issue. Drivers are able to jump the start of the races (and safety car restarts) quite aggressively as shown in the attached video. Understandably, this is extremely bad for MP online racing as it's essentially cheating. The driver hangs back and times the start as to fly by everyone else obeying the start command, timing the start as to not pass before the green flag.

     
    • Agree Agree x 2
  8. gdubmx

    gdubmx AMS 1 Beta Tester AMS2 Club Member

    Joined:
    Jul 5, 2016
    Messages:
    90
    Likes Received:
    33
    Found a bug with custom championship being unable to edit number I opponents on the main screen bedofre you click start championship.

    Bugs I found with 1.5 that I've not tested in 1. 6 is,

    Unable to create multi class championships (whilst having the option available to add classes and even edit it's participants.

    Could only have 1 championship save at a time. Multiple championships saves would cause other saves to corrupt and failed to start. Could not run simultaneous championships
     
  9. Jesse B

    Jesse B New Member

    Joined:
    Dec 4, 2021
    Messages:
    4
    Likes Received:
    0
    Imsa ai seems to have too much grip on the start for road atlanta

    When I try to watch a post race replay, the screen goes black even if i hit escape, have to ctrl alt del, instant replay works fine

    Edit- wrong place and don't see a delete button
     
  10. Jesse B

    Jesse B New Member

    Joined:
    Dec 4, 2021
    Messages:
    4
    Likes Received:
    0
    Track & Layout Used: Road Atlanta
    Car Used: Lmdh Cadillac
    Applicable Settings: AI
    Report: Too much grip at race start
    Steps to reproduce: Set AI to a competitive level in practice or qualy and then notice how your car cant keep up in corners for the first 3/4 of a lap
     
  11. Jesse B

    Jesse B New Member

    Joined:
    Dec 4, 2021
    Messages:
    4
    Likes Received:
    0
  12. TomLehockySVK

    TomLehockySVK Well-Known Member

    Joined:
    Aug 7, 2022
    Messages:
    1,305
    Likes Received:
    1,704
    Can confirm joining a MP session has a random chance of the wheel not working and having to restart.
     
    • Like Like x 1
  13. Dewald Nel

    Dewald Nel Member

    Joined:
    Mar 30, 2016
    Messages:
    51
    Likes Received:
    14
    Anyone figured out a way around this yet? Since posting this, I've noticed that for some reason the right hand red tactile switch down is replicates as my brake bias forward assignment, which is actually the right hand rotary forward rotation assignment.

    I've tried to change the wheel type to others, but no luck.
     
  14. BenC

    BenC New Member

    Joined:
    Sep 19, 2024
    Messages:
    24
    Likes Received:
    7
    Track & Layout Used: Daytona Road Course
    Car Used: Oreca LMP2
    Applicable Settings: Max IMSA field, 110 level AI, High Agression
    Report: LMP2 AI cars failing to pass GTD class
    Steps to reproduce: Race IMSA session on Daytona
     
  15. yndoril

    yndoril New Member

    Joined:
    May 24, 2024
    Messages:
    28
    Likes Received:
    11
    Track & Layout Used: Any
    Car Used: BMW M Hybrid V8
    Applicable Settings: Any
    Report: Interior shadows seem to be missing
    Steps to reproduce: Pick BMW M Hybrid V8 and use cockpit cam

    BMW vs Porsche in comparison
    20241203193301_1.jpg 20241203193204_1.jpg
     
  16. Havner

    Havner Member

    Joined:
    Nov 30, 2021
    Messages:
    42
    Likes Received:
    20
    Track & Layout Used, Car Used, Applicable Settings, Report: irrelevant

    Report: The fuel map settings have 3 different names for its settings:
    1. In the setup page: 0.90, 0.95, 1.00
    2. In the ICM: Lean, Normal, Rich
    3. In the Messages when using shortcuts: Low, Medium, High

    It would be nice to make that consistent.
     
    Last edited: Dec 4, 2024
    • Like Like x 1
  17. Havner

    Havner Member

    Joined:
    Nov 30, 2021
    Messages:
    42
    Likes Received:
    20
    Track & Layout Used, Car Used, Applicable Settings, Report: irrelevant

    Report: When changing Brake Bias with the shortcuts the messages that appear in the message box don't overwrite each other. This way we see the messages for all the previous adjustments and the newest is at the top, but since messages disappear from the bottom and are bottom aligned, the "top" can be in 3 different places hence it's actually hard to see which of those is the newest one. The messages should overwrite each other just like they do e.g. for fuel map/TC/ABS.

    Steps to reproduce: Assign fuel map and brake bias to the shortcuts. Press them and observe different results in terms of messages on the screen (one for fuel map, several for BB).

    bb.jpg
     
    Last edited: Dec 4, 2024
  18. Havner

    Havner Member

    Joined:
    Nov 30, 2021
    Messages:
    42
    Likes Received:
    20
    Track & Layout Used: Any
    Car Used: P3 MetalMoro MRX (maybe other similar as well)
    Applicable Settings: irrelevant
    Report: Broken look back camera, pretty unusable, as you can't see what's actually behind the car
    Steps to reproduce: Assign "Look back" shortcut, press it in car.
    20241204010452_1.jpg
     
    Last edited: Dec 4, 2024
  19. Xzanman

    Xzanman Active Member

    Joined:
    Jun 8, 2023
    Messages:
    360
    Likes Received:
    235
    Track & Layout Used: Laguna seca
    Car Used: Oreca 07 and Ligier JS
    Applicable Settings: single race 25 mins real weather
    Report: lap one turn 4 all the AI almost come to a stop
    Steps to reproduce: Run the race, it happen to me 3 times over 2 days. They were 3 attempts in a row to run the race.
     
  20. kmikiwi

    kmikiwi Member

    Joined:
    Jun 19, 2016
    Messages:
    69
    Likes Received:
    28
    Track & Layout Used: Any
    Car Used: Any
    Applicable Settings: Online race any settings
    Report: Overlays and UI change into old and new
    Steps to reproduce: In a race online when you drive you get a leaderboard design, when your are in monitor view, you can see a different design, the new one, and when you are host and want to stream a race, you become to espectator or race director and it shows the old design.
    [​IMG]
     

Share This Page