Bug Reports - Automobilista 2 (Read the Opening Post)

Track: NA
Car used: Multiclass
Applicable Settings: Singleplayer Multiclass Custom event
Report: Custom event always has Stock Car 2022 in the selection, despite deselection, saving settings and race afterwards. I have to deselect the stock cars from the classes every time i create an event

 

Track & Layout Used: any rallycross track
Car Used: MINI Countryman R60 RX and Volkswagen Polo RX
Applicable Settings: any
Report: No telemetry data from these two cars. At least with Simhub. Other RX cars (Citroen and Lancer) works without problem. Tested on shared memory and UDP with no success. Simhub updated to latest version.
Steps to reproduce: Drive Mini or Polo on any rx track with Simhub on.

 

At Snetterton 200 (possibly all layouts), the trackside camera coming out the final corner isn't triggering for me, shows a camera behind some buildings instead. Switching to different camera and back doesn't help.

 

Ultima GTR Supercar has an empty tire option in the garage settings (it goes default, semi-soft (?), then empty gap).

 

Done all that, no change

 

Track & Layout Used: any.
Car Used: any.
Applicable Settings: Real Weather or Random Weather.
Report: Weather change after watching Instant Replay. This is "game breaking", after resuming everyone will be on incorrect tyres.
I could salvage a bit of the replay of the exact moment it happened, you can see the track changing back from dry to wet at the 8s mark (when I quit the replay and resumed the race).

Steps to reproduce:
- Create a single race with Real Weather or Random Weather.
- Wait until condition changes from dry to wet (or contrary).
- Have all cars go to the pit change their tyres.
- Pause the game and watch an instant replay.
- Resume the race : track will be back at initial condition from start of the race.

 

Track & Layout Used: any.
Car Used: Chevy Corvette Z06 GT3.R.
Applicable Settings: any.
Report: error on stickers applied on the onboard wheel of the Chevy Corvette Z06 GT3.R passed all QC test from v1.6 and made it live. Right Indicator button is still tagged as "Ind Left" on the sticker (see below).

Steps to reproduce: N/A

 

Track & Layout Used: Vir Full (any track works though)
Car Used: ST (Any car works though)
Applicable Settings: Real weather test day on a day were the track should be some degree of wet.
Report: Once you're in a real weather session if you click "restart session" it will disregard the real weather track state and make it a dry green track instead. The only way to get it back is to exit out to menu and come back once more.
This has been reproducible in any combo and date i have tried so far.

 

I'm trying to figure out how to delete this, I thought it was a bug but its just user error.

 

Can confirm after more tests with several game starts and different races:
When I only set refuelling (damage repair doesnt matter for the outcome) , its not refuelling. With tire change and fuel set, it´s working. Used different cars, some where I leave everything default (setup and pit strategy) and some not.

 

when I tested the 1.6, the new Lamborghini GT3, the hood camera is off-center compared to the other hood cameras

the Camaro GT4 the sound only comes out on the left side of the headset when in the bonnet/hood camera even though it is a car with dual rear exhaust on both sides and it seems to work fine in other camera or when looking behind:

The Nissan R390 GT1 in replay´s and monitor the onboard cameras have no sound:

 

I've reported it since many years ago - standings are still incorrect, car which retires, is always placed lower in standings than any finished car. I mean car which retires on the last lap of a race, is placed behind a car which finished, but was +3, +4 etc. laps down! It is an important thing.

 

Track & Layout Used: Spielberg '77 (screenshots below), Spielberg '74, Kyalami historic, Sudschleife, Hockenheim '77, Monza '71, Spa '70
Car Used: Formula Junior
Applicable Settings: Dry session, 90 rated AI
Report: AI racers are significantly faster in the race versus practice/quali.
Steps to reproduce: Load up a F-Junior session on Spielberg '77 (this is the one it seemed the most exaggerated on, but any listed above will reproduce as well). Drive a qualifying session, even a short 15 minutes will do, then participate in a race session. The AI gain ~7-10 seconds per lap in race pace compared to qualifying, depending which individual entry you look at. Reproducible online or offline.

Screenshots from a 90-rated AI session.
Qualifying:

Race:

 

Track & Layout Used: Road American (Doesnt matter, happened on le mans too)
Car Used: BMW M4 GT3 G2
Applicable Settings: 30 player multiplayer lobby LFM I am East Coast America, the other player was from Belgium, and the lobby is based in EU.
Report: ANOTHER car lags and teleports under me, taking me out.
Steps to reproduce: Multiplayer lobbies

First video is of this incident, second video is of a previous incident (I posted it on this forum as well) This has ruined two of my clean races now.

 

Track & Layout Used: Any
Car Used: Any
Applicable Settings: Any
Report: While running time trials only one sound is played during spectate mode
Steps to reproduce: Open Time Trials and try spectate mode with any car

 

Track & Layout Used: Daytona Sports Car, but seems to be any
Car Used: LMP2 G2 Oreca 07, but seems to be any
Applicable Settings: saved setup with custom gearing
Report: last saved setup is not loading after restarting AMS2
AMS2 Version: 1.6.3.4
Steps to reproduce: Create a saved setup for the LMP2 G2 Oreca 07 and Daytona Sports Car in Time Trial with the attached gearing and drive it. Restart AMS2.
Open Time Trial with the LMP2 G2 Oreca 07 and Daytona Sports Car. Information at the top of the screen shows Setup Name Default. Top speed is lower and car is hitting the limiter. If I click Edit Setup then the Back button, top of the screen shows the Setup Name is now my last saved setup. Top speed is higher and car is not hitting the limiter.

 

Probably been mentioned but monitor cameras keep cycling views, I don't use this very often and maybe this is why. Quite annoying.

 

Track & Layout Used: Any
Car Used: Cadillac V-Series R
Applicable Settings: Any
Report: After the latest update the led flares of the headlights are all weird.


Edit: disregard, I realised this is actually accurate

 

Track & Layout Used: Any
Car Used: Any
Applicable Settings: Qualy + Race session
Report: The underbody shadows/occlusions of opponent cars seems to be disappearing after short distance
EDIT: Seems like the underbody shadows bugged when I do qualy then race, if I go straight to race session the shadows stay there
Steps to Reproduce: Start a session with qualy (I set it to private, idk if that's affecting anything or not) and then race

 

Track & Layout Used: Historic Kyalami, probably others
Car Used: Formula Vintage Gen 1 probably the same with other similar cars
Applicable Settings: VR on Quest 3 with max settings except shadows, may be an issue in flatscreen.

The LoD is being culled on the drivers head/helmet at far too short a range, the drivers have no head at a clearly visible distance. This is most obvious on the main straight where the head/helmet pops back into existence as you go into the braking zone if you are catching a car. Also if you pull off the track at the first turn and then look back as the cars arrive at the turn you can see all the heads/helmets popping into existence, but I'm guessing this is more radically enforced LoD cutoff as its cars behind.

I have noticed this on other non formula cars in VR where you can clearly see things like roll cages disappearing while still not that far back. Any chance of a level of detail slider?

Thanks