Troubleshooting - Automobilista 2

Discussion in 'Automobilista 2 - Help & Support' started by Heitor Facuri Cicoti, Apr 4, 2020.

  1. nixlavaplanetcycling

    nixlavaplanetcycling New Member

    Joined:
    Wednesday
    Messages:
    2
    Likes Received:
    1
    Hello
    I have a G29 and separate Asetek La Prima pedals. I can assign both of them to steering and pedals without issue. However when calibrating the pedals on either throttle or brake, even the slightest input immediately causes 50% input. In game this results in a minimum input of 50% of either accelerator or brake. The pedals are calibrated with RaceHub (Asetek software) and have appropriate deadzones set and work without issue in all other simulators.

    Things I've tried:

    - Deleting AMS2 folder unter Documents
    - Playing with deadzones and sensitivity ingame
    - Removing deadzones and recalibrating in RaceHub
    - Tried with Custom or Legacy wheel configuration in AMS2
    - Yes, it's set to "separate", not "combined".
    - Unpluggin/Replugging the pedals before/during AMS2 launched
     
  2. Marius H

    Marius H Forummoderator Staff Member AMS2 Club Member

    Joined:
    Mar 24, 2016
    Messages:
    6,175
    Likes Received:
    2,754
    @nixlavaplanetcycling I believe I've seen this before somewhere. Uhmm, I think the cause was that the pedals within the driver where set to combined or so. Make sure it's not combined within the drivers. Does your issue also happen in other games?
     
  3. nixlavaplanetcycling

    nixlavaplanetcycling New Member

    Joined:
    Wednesday
    Messages:
    2
    Likes Received:
    1
    No, of course I solved it immediately after posting :whistle:
    The issue was that apparently it wasn't correctly calibrated for Windows. In the legacy game controller settings (Start=>Run=>joy.cpl) I could observe the behavior as well (skipping from 0 to 50%). Calibrating in that dialog in fact made it worse, I assume because it's aimed at regular joysticks and gamepads. Clicking "Reset to default" there fixed it both in Windows and AMS2.
     
    • Like Like x 1
  4. Nolive721

    Nolive721 Active Member

    Joined:
    May 17, 2020
    Messages:
    518
    Likes Received:
    164
    Thank you as going through Calibration via the Windows Game controller did the trick.
    now why AMS2 only was exhibiting this issue is a mystery, I am running W11now, could have influenced the problem, no idea.
    Anyway, happy AMS2 gamer again and btw, nothing beats the value proposition of these SIMJACK pedals, they are great:cool:
     
  5. RNoctua

    RNoctua New Member

    Joined:
    Jul 6, 2021
    Messages:
    14
    Likes Received:
    4
    I distinctly remember that there was no problem with the engine sound before. It was centered, but it seems after 1.6(?) the sound changed and became surround sound, but terrable listen to a loud engine sound in one earphone and a quiet transmission in the other.

    For example, the 720S has the engine sound on the left and the transmission on the right. The Porsche GT3 doesn't have that problem.
    GT1 Mercedes - the sound is closer to the center, but on the left. Nissan GT1 oesn't have that problem.

    Is there a solution?
     
  6. Marius H

    Marius H Forummoderator Staff Member AMS2 Club Member

    Joined:
    Mar 24, 2016
    Messages:
    6,175
    Likes Received:
    2,754
    Have you used the search function first? I believe some had a similar issue. You've to check headphones for sonic in windows off, if I am correct. So please check your audio in windows or realtek or anything else you using. Make sure you've checked 'headphones' within the audio-settings ingame too. If these suggestions do not help please report it in the bugreporting-topic
     
  7. Jagdomatic

    Jagdomatic New Member

    Joined:
    Jul 7, 2023
    Messages:
    13
    Likes Received:
    1
    Greetings. I think the driving assists stopped working after the 1.6.3.5 built. After reverting to the previous version, I’m not experiencing any issues right now.
     
  8. AllocDK

    AllocDK Active Member

    Joined:
    Jun 22, 2024
    Messages:
    408
    Likes Received:
    172
    Do you force assists on or do you use real driving assists?
     
  9. Jagdomatic

    Jagdomatic New Member

    Joined:
    Jul 7, 2023
    Messages:
    13
    Likes Received:
    1
    Force assists were enabled. However, after the latest update, neither real nor force assists worked.
     
  10. Jack_silvereagle

    Jack_silvereagle New Member

    Joined:
    Jun 9, 2020
    Messages:
    9
    Likes Received:
    3
    Not sure if I'm being a knucklehead or if this is an oversight? I assumed there would be a prompt to create a championship etc.
    upload_2025-1-24_17-44-23.png
     
  11. Marius H

    Marius H Forummoderator Staff Member AMS2 Club Member

    Joined:
    Mar 24, 2016
    Messages:
    6,175
    Likes Received:
    2,754
    See previous page.
     
  12. Daniel Gilligan

    Daniel Gilligan New Member

    Joined:
    Jan 15, 2024
    Messages:
    6
    Likes Received:
    0
    As the title says, I'm in VR, loaded up for a league race today and the cockpit camera was looking straight down. I tried the re-centre VR key, re-centring SteamVR, and then looked up that using ctrl+k and 5 on the numpad might work.

    For that final option, it works in desktop/2d mode, but in VR the numpad does nothing after you enable ctrl+k. In addition, resetting the camera with numpad 5 in the desktop version of the game does not then save the new camera settings, every new session you load in to the camera has reset to looking down.

    I've missed one league race and might miss more events this week if I can't see where I'm going on the track, I desperately need some assistance, please.
     
  13. SunBro

    SunBro Active Member

    Joined:
    Mar 31, 2020
    Messages:
    150
    Likes Received:
    150
    Does anyone else have any issues getting ams2 to recognize their G27 after 1.6.3.5? I was really excited but the game doesn't recognize my G27. The controller profile is still there but i even tried removing it and starting fresh and the game simply doesn't recognize my g27. All other sims and windows itself recognizes it.

    And yes i did verify files twice.
     
  14. Pabl0uk

    Pabl0uk New Member

    Joined:
    Feb 4, 2024
    Messages:
    1
    Likes Received:
    0
    Hi All

    I have had AMS2 on my system for a long time and have messed about adding reshade etc since I have started using it again I can't see the selection for MSAA in the settings. I am using 9800x3d with RTX4090 and quest 3 headset.

    Firstly should I just do a full new install due to the new 1.6.3 update with me messing with reshade in the past?

    And should I be seeing the MSAA option in the new 1.6.3 update settings menu?

    Thanks in advance
     
    Last edited: Jan 25, 2025 at 10:48 PM
  15. RacerX

    RacerX New Member

    Joined:
    Yesterday
    Messages:
    1
    Likes Received:
    0
    My Moza R5 wheel is detected but neither pedals nor shifter are detected and cannot be calibrated.
     
  16. Marius H

    Marius H Forummoderator Staff Member AMS2 Club Member

    Joined:
    Mar 24, 2016
    Messages:
    6,175
    Likes Received:
    2,754
  17. Javo83

    Javo83 New Member

    Joined:
    Friday
    Messages:
    1
    Likes Received:
    0
    Hello, I need help with my wheel. Until the December 1.6 update, my Thrustmaster T300 with the Ferrari SF1000 wheel and T-LCM pedals worked perfectly. I hadn’t been able to play for a long time, and now that I have time, I’m only encountering problems. The game does not detect my wheel, and I can’t find a way to calibrate it.

    I’ve tried the different solutions I found on the forum: [SOLUTION] Wheel not working? Try this first. — this only worked when I used the original T300 RS wheel. I’ve tried uninstalling the game and deleting the folders, but it still doesn’t work.

    Both the base, wheel, and pedals are updated to the latest version, and most importantly, I’ve confirmed they work perfectly in other racing games on PC and PS.

    Does anyone know how to solve this problem? I’d like to be able to use my SF1000 wheel.
     

Share This Page