[SOLUTION] Wheel not working? Try this first.

Why dont you just turn your wheel more rather than "Set the wheel rotation to 180-360" when you are assigning your steering?

 

I use a 1440 Deg rotation DD and have no such problems. Like I said just ensure you turn the wheel enough!

 

I am experiencing the same issue with my R12. I have gotten everything to bind correctly except the left and right. Every single time I turn to the to or right doesn’t matter I always get an “Multiple inputs where detected. No action was assigned”. error message. I have tried every degree of rotation, every wheel selection and absolutely nothing. The closest I get is the wheel will only go to the left but not the right. This is the only game I have had trouble with, everything else works flawlessly out of the gate. This seriously need to get fixed.

 

This did not work for me at all. Please see my post below. Thanks

 

A correction and a further tip:

• In the second step what the game expects you to do is turn the wheel back to centre, and then from centre to 90 degrees (either direction). I mention this because if your wheel is set (in the wheel's software) to a higher max angle, for example my Moza R12 supports up to 2700 and is set to that in Moza Pit House, then turning until the game says 900 or 1080 will give an incorrect result. In my case the correct process gives 2700 on screen in this step.
• When you're following the above steps, if 0 degrees is shown on screen, then you may have only one of the steering directions bound. You need both left and right bound for this process to work.

 

Hello guys,
I have a small but annoying problem with my Thrustmaster T598 wheel. The base has an internal display for telemetry like gear, speed, position and so on. It works in training, qualifying and race but as soon as I return to the main menu for the first time the telemetry is no longer visible (the display does not even show the default 'T598' that it usually displays off track). LED on the wheel rim is also off from that point onwards. I have to restart AMS2 to get it all to work again.
Some wheel effects like gear jolt also stop working so it seems to me like the base has no more access to the telemetry data after returning to the menu. Is that a known issue with other periphals? Does anyone know a fix?

(The wheels drivers are up to date, roation = 360°, everything is calibrated and works flawlessly, the T598 is registered as a 'generic direct drive' and I use a custom FFB-file. UDP is set 'off' but I also tried '1', the other telemetry settings are set to 'Project Cars 2, Crew Chief works in the background. The T598 works in Forza Horizon 5 for hours without losing the telemetry data / gear jolt effect.)

Thank you in advance!

 

Thank you for your quick response and sorry that I could not test your solution earlier but I just could not find the time.
I tried it now but the problem remains - as soon as I go back to the main menu for the first time, the display on the base stops working and I have to restart AMS2. Maybe this issue is T598-related and I will just have to wait for Thrustmaster to release new drivers. Or I could do a fresh install of AMS2 but I don't really know if I want to try that We will see...

 

Hello, I switched from Fanatec to the Simagic Alpha Mini and now I'm having trouble calibrating the steering. I did the calibration following the post here in the forum, but it still doesn't work. I've attached a few pictures of my settings.

 

I can't steer. The steering wheel is turned all the way to the right. If I move the steering wheel back and forth while driving, the car quickly drives straight ahead. The virtual steering wheel shows that the steering wheel is always fully turned. When I calibrate, I only have to move the steering wheel briefly, and it immediately shows 100. Even if I move it further, nothing changes.

 

Thanks for your support. Using a different USB port helped.

 

My steering wheel don't work anymore, i can bind the buttons and the wheel but if a want to calibrate nothing hapens. Logitech g dd pro bot in beta and not in the mail build.

I have fixed it, reset do default and bind again.

 

NO.
My 2 Simagic DDs so far were assigned in any game but AMS2 within 2 seconds.
Both DDs instead take days to figure out with AMS2.
There's no hit or miss, simply AMS2 assignment code need work.

Now with the Simagic Alpha EVO PRO what do I have to do to make it work?
So how do I bind? I click on Steer Left/Steer Right then turn left or right with 360, 540, 900, 1080, 2520 no matter what, and the wheel is not recognised. Changing port gathered no effect.
On Control scheme Custom and Separate.