Every Issue in the book solved - Fanatec.

Discussion in 'Automobilista 2 - Help & Support' started by Kaylos, Feb 4, 2022.

  1. Kaylos

    Kaylos New Member

    Joined:
    Feb 4, 2022
    Messages:
    4
    Likes Received:
    5
    I bought AMS2 during the November Black Friday sales and have not been able to play it because I couldn't get my CSL Elite 1.1 PS4 to work properly. I had every issue in the book, multiple inputs detected on calibration, AMS2 not recognizing my wheel at all, shifters not working on track, and my wheel getting set to a maximum of 900 DoR that persisted even when leaving game. I tried again last night, and on the verge of giving up, I found the solutions I needed, so I am going walk through solving each one.

    1. I'll start with AMS2 not recognizing my wheel at all, as that is where I was stuck last night. This wasn't an issue in any other racing game I had, so I looked it up and found a reddit post stating you needed to make sure steam controllers were disabled under the game properties in steam. I checked this and under AMS2 and the steam controllers were disabled. I checked ACC where I knew it worked, and it was set to use default settings. There are 3 options, disable steam controllers, use default settings, and enable steam controllers. In order to get my wheel to be recognized by AMS2, I had to change this to use default settings.
    2. So now it let me assign bindings, but I was still getting multiple input errors trying to assign wheel axis. Following a youtube video I found, I shortened the DoR to 240-300, and then the key part, after I turned the wheel to the bumpstop, I started returning it center. This got it to finally recognize the wheel axis.
    3. Wheel Calibration worked, however, I was getting limited to 900 DoR when the Elite 1.1 is 1080, and this persisted when leaving the game in my control settings under control panel properties. The solution was to leave Auto and go to 1080 DoR on the wheel settings. This solved the persistance problem resetting the wheel, and allowed me to properly set the wheel to 1080 DoR under wheel calibration.
    4. So being excited, I jumped onto Road America (love that track and live near it as well). As soon as I left the pitbox and started accelerating, I was stuck in first gear. Feeling ready to scream, I kept my cool and left the test session. The only way I was able to get my shifters to work in game was to go to custom wheel instead of having it assigned to CSL Elite or CSL Elite PS4. Reassigning the shifters under CSL Elite or CSL Elite Ps4 did not work. But for some reason, assigning them under custom wheel did.
    So finally I had every issue in the book solved and was able to go on track and finally play the game. Hope this helps anyone else out there struggling through similar issues.
     
    • Informative Informative x 4
    • Useful Useful x 2
    • Like Like x 1
    • Friendly Friendly x 1
  2. Maser V6

    Maser V6 Assume nothing._ Verify everything._Have fun AMS2 Club Member

    Joined:
    Mar 27, 2020
    Messages:
    2,502
    Likes Received:
    1,422
    @Cully
    May be of help from above chap. Hope you have sorted it.
     
  3. Cully

    Cully Active Member AMS2 Club Member

    Joined:
    Mar 8, 2016
    Messages:
    152
    Likes Received:
    84
    Thanks so much for thinking of me, ive tried everything that worked for Kaylos and still nothing works for me :mad::confused:
     
  4. Alan Hinton

    Alan Hinton New Member

    Joined:
    Mar 31, 2020
    Messages:
    5
    Likes Received:
    1
    nice try...tried all of that (plus different usb port)...still not working..feeling pretty ripped off!
     
    • Like Like x 1

Share This Page