There are 3 temperatures shown for each tire. Is it....... Front left tire Front right tire outer/middle/inner inner/middle/outer Which is how I would read the tire temperatures (oriented to the direction of travel and position on the car). OR "Outer/middle/inner" for each tire?
hmmm. Because of the way AMS suspension tuning is laid out, I assumed it's an overhead view. --------- overhead view of car--------------- LF Tire-------------------------RF Tire 80/78/76----------------------76/78/80 LRTire----------------------RRTire 87/84/82 ------------------82/84/88 So the temps should look like the above. And in a setup program, the temps were labeled inner, center, outer based on the orientation of the tire to the car. I went through a left hand turn and wasn't sure if my tire readings were correct since they looked like this. LFTire--------------------RFTire 80/78/77--------------84-80-78 ????? Wasn't sure how I could get lower outside shoulder temp readings in a left hand turn for the right front tire. Unless my camber was massively off or I stopped the lap at the wrong time to take temp readings. Or the tire temps are labeled differently. my real car speedo label is "MPH". AMS speedo label is "Mi/H" different label. - although it means the same thing. so I had to ask to be sure.
