Pedals not being recognized with G27 + Bodnar USB pedal adapter

I'm stumped here and wanted to see if anyone has come across this before, or has any suggestions.

I'm using a G27 Wheel & Pedals with the Bodnar USB Pedal adapter and cannot get AMS to recognize the pedals. It seems to recognize wheel inputs, but nothing on the pedals registers.

I'm running Windows 10.

I have the Wheel and Pedals/Bodnar USB plugged in to USB ports directly on the MoBo.

I've used the Bodnar Calibration software to setup the pedals there.

Logitech Gaming Profiler (v. 5.10.127) recognizes the pedals separately from the wheel--they register as "Logitech G25 Pedals" next to the "G27 Racing Wheel" in the Profiler > Game Controllers... window--which is expected. (JOY.CPL shows these two controllers) I'm able to calibrate them there in the Profiler, also. Under "Game Controllers" > "Advanced Settings" I can switch the 'preferred device' between either the wheel or pedals and get the same results in game.



I'm able to run rFactor 2 and Assetto Corsa with the same setup, the wheel and pedals work perfectly, but when I start AMS it does not seem to recognize them at all.

In AMS under Settings > Controls > Presets, I've tried selecting each of the "Logitech" options. Under the "Axis" settings all of the "Joy #" Sensitivity settings are set to at least 50%.

If I open and AMS into a window and have the Bodnar configuration program open in another window, I can see the pedals register in the Bodnar config when I press them. Its as if AMS isn't picking up on the USB port when everything else is.

Also, I've done the "Verify Integrity of Game Cache" check through the Steam properties menu.

I'm thinking that this has something to do with the Bodnar USB cable in some way. If I go back to the default G27 setup with pedals running through the wheel, AMS recognizes them and everything seems to work. I know that there are others using the G27 and the Bodnar without this problem, though.

Is there some other setting (maybe a config in the AMS folders) that I need to look at?

Read more: AMS is not recognizing G27 pedals + Bodnar USB adapter | Gone Broke Racing

 

I have the same, and yes they're seen as separate devices, so I created custom preset. Have you checked under axis/rates, they're under different controllers: 'Joy 1', 'Joy2', etc.