Automobilista 2 Custom Force Feedback - Overview & Recommendations

No worries,

But it's weird that you have no brake feel on your dd2.
Maybe post car, track, fanatec settings and in-game settings so we can see what @Shadak has for comments based on his dd1 where he's got it so those things are very clearly felt.
Also if you made any edits to the file post those.

Reg. the Lfb, increasing it should not make you clip more and it should not give you less feel in any amount that you would notice. It should however give you more feel at the low end and more feel at the center.

Cheers

 

Hi Karsten, Just tried .46, but can't seem to get the steering going light over a crest. What, if anything, can I adjust to get this feeling that is in .31? Everything else, after a few little adjustment, feels pretty good. I will test more later. Thank you for you continuing efforts.

 

Hey Michael,

Please change thse 2 lines:
(FL_load_norm_s (smooth FL_load_norm 0.05))
(FR_load_norm_s (smooth FR_load_norm 0.05))
to:
(FL_load_norm_s (smooth FL_load_norm 0.2))
(FR_load_norm_s (smooth FR_load_norm 0.2))

and these 2 lines:
(FL_load_norm (+ FL_load_norm_s (- FL_load_norm (smooth FL_load_norm 0.05))))
(FR_load_norm (+ FR_load_norm_s (- FR_load_norm (smooth FR_load_norm 0.05))))
to:
(FL_load_norm (+ FL_load_norm_s (- FL_load_norm (smooth FL_load_norm 0.2))))
(FR_load_norm (+ FR_load_norm_s (- FR_load_norm (smooth FR_load_norm 0.2))))

And see if it helps?

 

Thanks for that. I tried it and I think it was better, very hard to tell. Unfortunately, after about 40 minutes or so of trying different settings etc, I ended up going back to .31 again. Can't explain why it feels better, it just does. The car just seems to respond and communicate better. Can feel everything the car and track are doing.

 

copy that from inthebag and Michael

 

Which car is this?

 

I think it is car dependent maybe.
But next iteration will be targeted at making v47 better for all, including the v31 fanboiz
(And also work better across more cars yet again.)

 

Mate thanks for the feedback. The issue is that FFB is extremely subjective and depends on the gear used, expectations, preferences and real life and sim experiences. So some people like an certain implementation, others don't. Personally i find 0.31 to be lacking but if it suits you better, then fair enough. Now regarding 0.46 we have been working with Karsten and we have been trying to create something that is decent and acceptable for most cars and good between the different wheel bases which is a very tough mission as you may understand for many reasons. Having said that the purpose of the file is to work lets say "well" but give to each one of us the option to adjust things to our liking. I know it's not easy and it takes some time to do this but well it is what it is.

I have seen that you did your testing with the Mini and to be honest, as it is, it may not be the best thing. We haven't focused too much on adjusting the settings for this car. Nevertheless you can try for now this file that i have adjusted as per your comments (as much as i could of course) and see if it works better for you. Bear in mind both Karsten and i use an SC2 Pro with 100% strength and no filters at all. I am not sure how fanalab works but i suggest you may try removing any extra filters, etc.
For the ingame settings with the Mini i have used gain 38, lfb 5, fx, 55 and damping 10.

So give this a spin and let me know if it is any better for you. In the meanwhile Karsten is already having some new ideas for 0.47, so hopefully some issues can be resolved, but also that is why feedback is appreciated.

 

Ginetta P1 at Bathurst mainly. I have also tried GT3 and Stockcar. Same result for me.

 

Thank you Karsten, looking forward to trying this out.

I spent a few hours playing around with .31 yesterday. Only in the Porsche Cup and only at Nurburgring. I'm starting to really like it now though. I just bumped up really obvious stuff like kerb scale, general road noise, wheel tightening under braking and also increasing front_grip_slip_feel_coeff helped a lot. Clearly I like things on the more exagerated side.

I need to spend more time dialing it in and I haven't A\B tested it against default. But overall it's great, I have a good feeling of where grip is, good feeling under braking, a nice amount of feedback fx wise without it being over the top to the point where effects are grabbing at the wheel and still get that smooth transition around the centre that just isn't possible on default without a ton of damping.

Anyway looking forward to comparing .46 when I have .31 where I'd like it to be.

 

Will be very interesting!

 

I'm having a lot of trouble with .46 and not sure why. I'm always testing with Formula Reiza on Interlagos with SC2 (same SC settings as Karsten recommended) as my baseline so perhaps
this is downforce related differences from what you all are reporting.

I'm consistently getting clipping alert from my SC2 wheel mid high speed corners and it feels more like turning against a soft bumpstop than typical cornering forces. I tried increasing
and decreasing center_full and LFB slider value to get more center but its so far off not sure what to try.

The one positive thing I can say is that the new acceleration effect has made my starts off the line faster and enjoying this effect.

Cheers!

 

The formula reiza is rather extreme & I did not try it.
But I think you can lower the velocity_scale considerably and that should make it work.

 

Something to note, I've experienced drastic differences in FFB gain (per-car) in certain cases, perhaps related to switching between default / Custom ffb profiles(?) I had some cars set to 120% and others at 50% gain.

Exiting AMS2 and staring a new session may solve the issue, it did in my case.

 

Yeah that would explain it. reducing velocity_scale helped a lot but its still very far from the mark. I think a number of other parameters need tweaking to work well with Formula Rieza. Give it a try and see what you think.

Currently my favorite is version .43

Cheers!

 

I'm testing the .46 file on G920 ... I hope tonight to have a couple of hours free to be able to deepen it and be ready to adapt to the future .47 of Karsten, but summarily it seems to me already a good goal that obviously needs to be a refinement and no doubt will be focused on in future updates by Karsten & Company. For now I have tested the .46 LOW version with a configuration of values equal to Gain 65, LFB 50, FX 50-60 and Damping 0 (or 50) ... compared to the 45 (which is the first version with the yaw scale, the velocity_scale and with the progressivity depending on the downforce of the car) it must be said that it is certainly improved, it is still to be defined, but the direction and the sensations go in the direction of the versions .43 and .44 (my favorite on Logitech G920) ...

It is also true that the .31 file is a reference point among all the others (indeed according to many the best). Having done this, I think we should take the granitity of .31, the elasticity and innovations of .43-.44, and then apply the speed, downforce and scalability corrections of this version .46 and of future versions, all without creating anomalies, empty and/or inhomogeneous areas ...
I think it is a long and difficult job, especially if the feelings of each of us are subjective, especially if we have many different steering wheels and above all because no one is right because this is a simulation.

How to help Karsten & Company ??
- Not quickly comparing the various versions with the same values found and used with our favorite, because each file has its own poem to interpret and therefore each file could be ugly because it is badly set ... the gain of .31 is different from the gain of .43 and .44 and is again different on .46 and will be different on * 47, same situation happens with LFB (between the various versions), with FX and Damping ... if we then add, that each of us, can vary the values, the scales and forces of 3 masters (the rack, the road and the effect) the problem is amplified;
- Use the new files to test for a while before defining it (and/or returning to the favorite), as the brain and eye/hand sync is adjusted to your favorite file that you use every day ... a quick test (without making getting used to the brain and manual tacticity) falsifies our report card with incorrect feedback that can lead even those who compose the files astray ...

In short, we could risk going crazy .... but I think you all love Karsten & Company , so we communicate results and feelings only after extensive and long test sessions.

See you tonight, hoping to be able to give useful information on this .46 file .... good job to all and thanks ...

 

When I was giving my inputs and recommendations I was testing high DF cars as well to make sure there is nothing weird going on and also the ratio of forces applied to GT cars for example, and in the latest file Karsten made this pretty good so imo in most cars, you shouldnt need to adjust the FFB multiplier.

Anyway, can you post your settings please? Ingame + SC2 force.
I tested F Reiza just now on DD1 and it seems great. I get about 11Nm in very high speed downforce corners (300 kmh), I dont run my DD1 super tough as I like to keep the steering forces relatively realistic + a bit more to simulate G forces. Now after driving couple of race cars and a formula (F3 equivalent) on a closed track, I can say the G forces arent that big to warrant a 20Nm cornering force, not to mention the steering wheel is relatively light all the time. Of course the faster formula and prototype cars with huge amount of downforce will be a bit different. But its impossible to replicate the exact feeling in game. The most noticeable sensation in any car on the track is probably the braking and thats one of the reasons for the dec2_scale and exaggarate brake value, the increased centering torque during heavy braking is to imitate that feeling somewhat, while acel2 is to provide a bit of ligthness during heavy acceleration when the front tyres get unloaded.

 

Try also decreasing by 0.1 both master_road & master_effects. With the formula reiza i got as well some occasional clipping beeps in mid-high corners but i was either close to touching the curbs or i was on a bumpy road. In game settings if i remember correctly i had 32-34 gain, lfb 5, fx 55 and damping 10 or 15.

 

To be honest i was shocked at how this update made my Ts300 come to life.
Especially balance changes are really felt now, where i didnt feel anything before.
Maybe its a bit overreacting at times, but for this wheel this is the way to go i think.
I had my gain to 90 before, which suddenly felt too strong and i now tuned to 75
in a first step. What i find most astonishing now is the shift of loads of the car
(did only drive a few rounds in gt3s and porsche cup). i can somehow feel now
how the car is leaning to the sides.

for me this update is the best till now (not that i know how .31 felt )

Great job Karsten and team!

 

At first I thought v.46 was too weak/vague at the centre, and some of the effects, especially scrub, were a bit high. And I felt I was missing some of the acceleration/deceleration effects.
I did a few quick changes, and for me this improved the feeling quite a bit:
(master_road 1.10)
(master_effects 1.35)
(center_full 1.5)
(acc_boost_feel 0.2)
(acc2_scale 0.7)
(dec2_scale 0.4)
(dec_boost_feel 0.2)
(scrub_scale 0.2)

I'd say, for me, this is as good as v.44, with the added features from v.46 on top.
(HighEnd file, DD1, McLaren GT3 @ Nordschleife)

Edit: After some more practice I improved my personal best @ Nordschleife with both the McLaren GT3 and the Porsche GT1. That's usually a sign of improved FFB