Automobilista 2 V1.3.1.1 & Racin´ USA Pt2 RELEASED - Now updated to V1.3.2.0

Discussion in 'Automobilista 2 - News & Announcements' started by Renato Simioni, Dec 3, 2021.

  1. Marc Collins

    Marc Collins Internal Tester AMS2 Club Member

    Joined:
    Mar 12, 2016
    Messages:
    6,609
    Likes Received:
    3,298
    Not sure if this is useful, but I have no issues in Release or Beta. I use a Fanatec shifter (sequential and H-pattern) attached directly to USB (not into wheel connection). Default+. FFB is great, with no oscillations. Paddles, sequential and H-pattern all work as usual. Same settings I have been using for a few months now, including "Fanatec" and "CSW" in my controller profile. Latest Fanatec firmware and drivers installed.
     
    • Informative Informative x 1
  2. Maser V6

    Maser V6 Assume nothing._ Verify everything._Have fun AMS2 Club Member

    Joined:
    Mar 27, 2020
    Messages:
    2,502
    Likes Received:
    1,422
    @Commandant Lassard As I said empty until a first time is set pls try again rather than just dissagree
    20211231152426_1.jpg 20211231153341_1.jpg
     
    • Like Like x 2
  3. Commandant Lassard

    Commandant Lassard Active Member AMS2 Club Member

    Joined:
    Mar 20, 2021
    Messages:
    190
    Likes Received:
    197
    Maser I ment no flippancy by disagreeing, I'm talking specifically about a car (non kart) on a kart track. You get a different message something along the lines of this combo is not allowed. It was the first thing I tried after the update.
     
    • Useful Useful x 1
  4. Maser V6

    Maser V6 Assume nothing._ Verify everything._Have fun AMS2 Club Member

    Joined:
    Mar 27, 2020
    Messages:
    2,502
    Likes Received:
    1,422
    NP Commandant:) I would have tried the combo myself but I dont do karts tracks. However because of your post I tested TT and revealed a game freeze. this was unexpected as I ran online races earlier with no freeze or issues. So thanks
    Vid is Game freeze during TT test.
    further testing req, and hope it does not happen in online ranked races!
     
    Last edited: Dec 31, 2021
    • Informative Informative x 2
    • Agree Agree x 1
  5. Gringo

    Gringo Well-Known Member Staff Member AMS2 Club Member

    Joined:
    Mar 9, 2016
    Messages:
    282
    Likes Received:
    276
    Can you check your windows event log, look for an error event 13 from nvlddmkm, do you see that at the time your freeze happened?
     
    • Useful Useful x 1
  6. Ettore

    Ettore Well-Known Member AMS2 Club Member

    Joined:
    Feb 21, 2020
    Messages:
    2,740
    Likes Received:
    1,701
    Dude it just means you have to hit reset to default in that specific car. After that you can load any setup you want....
     
    • Agree Agree x 1
  7. Dady Cairo

    Dady Cairo "Son of Spartakus" and "Leisure Nostradamus" AMS2 Club Member

    Joined:
    Jun 12, 2017
    Messages:
    2,260
    Likes Received:
    781
    Try this with the the Trucks..:D
     
    • Funny Funny x 1
  8. Roar McRipHelmet

    Roar McRipHelmet Well-Known Member AMS2 Club Member

    Joined:
    Feb 25, 2020
    Messages:
    1,571
    Likes Received:
    1,257
    You don't even have to, as it just is recommended for a better experience. It helps against situations where your old setup feels odd in a way that is hard to fix without resetting that setup first.
     
    • Agree Agree x 2
  9. Bizarre Formula

    Bizarre Formula Well-Known Member

    Joined:
    Oct 11, 2020
    Messages:
    486
    Likes Received:
    371
    This is something I've had for a long time in AMS2, especially in time trials when crossing timing points usually. When I experience it, it doesn't last quite as long but it even saves it in replays.

    I also get occasional stuttering during online races, especially when hosting and people join or leave. I've always assumed it was a consequence of my computer though, not the game.
     
    • Like Like x 1
    • Informative Informative x 1
  10. Alias

    Alias New Member

    Joined:
    Oct 19, 2021
    Messages:
    6
    Likes Received:
    0
    You said about TT Board versions:
    So next time you change something in your engine and render the TT boards useless you plan to keep the times again????...... Why? Wipe the boards or add version numbers with the ability to filter everything else makes the boards a useless mess that have no function: I neither can compare myself to these times nor can I use the setups or use the ghost, pointless!
    Edit:Easiest version: just an added row in the record table that states 1.23.4324 or whatever else this mode is pointless as version updates come in...
     
    • Agree Agree x 1
    • Disagree Disagree x 1
  11. amsimp

    amsimp Impatient Racer

    Joined:
    Nov 10, 2021
    Messages:
    69
    Likes Received:
    52
    waste of space; reiza got bigger fish to fry :/
     
    • Agree Agree x 3
    • Dislike Dislike x 1
  12. azaris

    azaris Well-Known Member AMS2 Club Member

    Joined:
    Aug 30, 2020
    Messages:
    1,177
    Likes Received:
    584
    The rejoining the race after watching a replay putting the camera in the wrong car -bug still hasn't been fixed...
     
    • Agree Agree x 1
  13. MrTulip

    MrTulip Active Member AMS2 Club Member

    Joined:
    Jun 30, 2019
    Messages:
    160
    Likes Received:
    91
    I got shorter hiccups than Maser V6 in TT at Nurbs. One or two per lap. Same symptoms; loss of control during the hiccup and that totalled couple of my attempts completely. Mine were in VR though. Windows application and system logs were clean in my case.
     
    • Informative Informative x 1
  14. Yerffej

    Yerffej Active Member

    Joined:
    Aug 30, 2020
    Messages:
    133
    Likes Received:
    128
    Agreed, i thought i was going mad at one stage, I couldn't work out what was going on...
     
  15. ANJAROO

    ANJAROO New Member AMS2 Club Member

    Joined:
    Oct 3, 2021
    Messages:
    13
    Likes Received:
    15
    Anyone else with CSL DD have problems when using the CSL DD preset with their pedals not being recognized?

    My pedals are recognized with CSR elite profile but not CSL DD profile.
     
    • Agree Agree x 1
  16. Super Nova

    Super Nova Member

    Joined:
    Jun 7, 2021
    Messages:
    38
    Likes Received:
    19
    You don't have to do them. No one is forcing you to make achievs. Its a challenge for those who want it. Unlike you I find the Achievements of rf2 stupid and uninteresting. good eve to you ;)
     
  17. Super Nova

    Super Nova Member

    Joined:
    Jun 7, 2021
    Messages:
    38
    Likes Received:
    19
    Personally I find it good to reset the hotlaps each time there is a modification on a car. It would be stupid to keep unbeatable lap times because of a slower car for example
     
    • Agree Agree x 9
  18. Barry M Johnson

    Barry M Johnson New Member

    Joined:
    Dec 31, 2021
    Messages:
    3
    Likes Received:
    0
    I recalibrated the wheel and it cured the oscillation but the auto rotation does not work now. I had to set it manually on the wheel to 260 degrees to match the on screen wheel, which is annoying. I only use the paddle shifters on the wheel.
     
  19. Maser V6

    Maser V6 Assume nothing._ Verify everything._Have fun AMS2 Club Member

    Joined:
    Mar 27, 2020
    Messages:
    2,502
    Likes Received:
    1,422
    Hi Gringo, The first time it happened as shown was in v1.3 release with beta ranked, main build online (somebody else lobby).Twice in mine 1st release, then bug disappear until today. varyfied files, 2 prior online races were ok, though the ai took out @Gdude66 rather harshly (different issue).
    I will check log after food, and drink, and report when if/able.
    . Only since 1.3 here and introduction of rating system.
    I have to assign pedals seperate but not Fanatec (logitec with Bodnar usb link)
    Wheel went a bit weird at first run (rotate to rhs,) reset again from pit and all good.

    For those able in Time zone :DHAPPY NEW YEAR,
    FOR US OTHERS HAVE A HAPPY NEW YEAR ALSO:D:D. In a short while.!
    Have fun and Prosperose, healthy 2022 All
    :D
     
    • Friendly Friendly x 3
    • Like Like x 1
  20. Fizzy

    Fizzy Well-Known Member AMS2 Club Member

    Joined:
    Feb 29, 2020
    Messages:
    438
    Likes Received:
    334
    Leaving this here in case it helps:

    rafaelplacce said:
    Just a heads up for fanatec users.

    My ffb was a bit odd lately, so I came across a reddit topic and looks like some of the latest windows updates have messed up the fanatec drivers in some PCs. I did a re-install and its fine again.
     
    • Informative Informative x 2

Share This Page