Automobilista 2 Custom Force Feedback - Overview & Recommendations

Through Stakanovs and your files I was able to improve my custom. Is still version 35 with small changes. A little reduces the pressure build-up of the tires (stretch). The process of slip_crossover extended. And less hardness and resistance in steering in fast elongated corners when braking. PS: Stakanov I will share with you my impressions of your custom soon. Needs to test a little more

 

Thanks you very much! I will try it with the new version of ATMOS as soon as possible :-D

 

Where can I find this file thanks

 

Few post above ... but here is the direct link for the download

https://forum.reizastudios.com/atta...os-4xfx-1wheel-mod-v1-3-1-with-yaw-txt.20815/

 

Thank you

 

For those of you who play with a Simagic Alpha Mini, Personally I settled with the attached custom ffb. I use Karsten latest original. With some tuning of values. I will stick with this file. It drives really nice, it's very easy to catch slides and correct and the communication is subtle but effective.

FFB strength in Alpha manager is 100. FFB ingame is 65. LFB and FX is around 25 Damping 10.

 

Guys I discovered a big bug in my last custom I posted. I've put it right again and I'll post it to you. But even better is the discovery in Stakanov's Custom. I'll write you more about it in a moment so that you can also test this incredible improvement yourself with the dynamic acceleration and the dynamic braking based on the weight

 

Sets these values approximately according to my custom. That would be accel_feel 0.25/ accel_feel_follow_weight 0.4/ brake_feel_follow_weight 0.4/bump_feel_follow_weight 0.25. Then with the dynamic acceleration everything to 500 as with my Custom. Stakanov I think the weight and the mass must remain, only now you have this fantastic improvement. Everything is sharpened, at least with my dd. I hope that it is also the case with the Belt_basen

 

Tested without yaw. Due to your change Stakanov I also tested it with these 250 and forgot to put it back again. With my Custom it was less noticeable, but at your extreme by your 4 driven wheels. Greetings from Daniel

 

Yes @Danielkart in your file is right 500 ... I dont understand if you advice me to set 500 even in my file or remain to 250???

 

Yes definitely Stakanov, I tested it. I found it strange that they had brake_feel_follow weight almost 0. It changes everything with 500 exactly the same fantastic feel with the dynamic throttle and brake feel as in my custom. I noticed when I set the brake_feel_follow_weight above 1, it became unridable. No problem with 500

 

Just to confirm, I rename the custom file ffb_custom_settings

 

Yes and replace the file in the folder Documents/Automobilista2 ... then in game select the preset "custom" and set the cursors

 

I'll check back next week when I return to nome ... thanks for the advice!

 

yes too bad you can't test it and you're gone again. Or that nobody else notices. Have a nice week and see you soon Stakanov

 

I like this

 

Hi . Just wanted to say what a lovely experience I've just had while testing this file . Felt wonderful with the formula ultimate gen 2 and the f3 . Tested with the BMW gt4 and Caterham 620 also but might need to tweak either my wheel settings or game settings as the slip crossover with these cars seemed a little to soon and the kerb feel was slightly subdued . Excellent file though and for me it's a keeper . Thanks for sharing .

 

Glad you like it! Of course credits go to @Karsten Hvidberg for the original file. I only tuned the settings to my liking with the simagic alpha mini.

I tuned the values to my favourite car at the moment, which is the Porsche Cup car, which has slightly higher FFB effects than some other cars.

Feel free to change the values of Kerbs in this section:

# Road features settings
#

(texture_scale 0.5)
(micro_bumps_scale 0.4)
(kerbs_surface_scale 3.0)
(kerb_bump_scale 1.0) #How big the tall curb bumps are.
(micro_bumps_smooth 0.0)
(kerbs_surface_smooth 0.03)
(rear_micro_bumps_scale 0.3)
(rear_kerbs_surface_scale 1.0)
(suspension_scale 0.35) #how much the suspension is felt.
(large_track_bump_scale 0.06) #how much bumps on the track are felt.
(large_offroad_bump_scale 0.05) #how much bumps off the track are felt.

In the original file, these values are way higher, but they give excessively high FFB output on the Simagic Alpha mini so I toned them down a lot.

 

(Son)
Mr. @Danielkart , i tested your advice for @Stakanov that is absent...

(accel_weight_scale (/ 500 (/ (+ corner_FL corner_FR corner_RL corner_RR) 9.8)))

It's true the formula with 500 works fine then thanks a lot, then i talking to Stakanov privately and he realized that in his file the correct value on 4 variables would be 1000 (and not 250 as initially set for his mistake), so I tried this

(accel_weight_scale (/ 1000 (/ (+ corner_FL corner_FR corner_RL corner_RR) 9.8)))

and with 1000 everything is fully functional and pleasant, and the other values that i used in my test with T300 are

(accel_feel 0.35)
(brake_feel 1.35)
(accel_feel_follow_weight 0.35)
(brake_feel_follow_weight 0.35)
(bump_feel_follow_weight 0.25)

I hope it is indicative. Thanks to all of you and good evening.

 

sorry wrong thread