Bug Reports - Automobilista 2 (Read the Opening Post)

Ginetta G40 cup has no idle noise or start up sounds

 

Version: 1.4.6.1.2267.AVX
Track & Layout Used: ANY TRACK
Car Used: All GT3 cars
Applicable Settings: setup stock
Report: Onboard TC is still not functioning, either on my CSL DD or button box. Onboard ABS works though

 

Version: 1.4.6.1.2267.AVX
Track & Layout Used: ANY TRACK
Car Used: F-US G3 Reynard cars
Applicable Settings: -
Report: "baby" wings are missing at the nose. But from onboard views they are visible...
This is for ALL G3 Reynards, if normal or speedway aero configuration

 

Version: Lastest Release
Track & Layout Used: Jerez 1988
Car Used: Gen 4 Fomula 1
Applicable Settings: Tested with Max graphics settings
Report: Car disappear from the rear view mirrors at different points around the track.

 

Version: v1.4.6.1
Track & Layout Used: Long beach
Car Used: GT4 class and Sigma P1
Applicable Settings: Online lobby with over 20 drivers most of them local to each other. Rolling start and manual start.
Report: Multiple problems when we tried to start the race both with a rolling start set up by the game and a manual formation lap...

Attempt 1 - 30 min qualy 45+1 lap race

There was 2 drops into cars, the first 16 took off before the rest of the field when everyone had readied up... The rest were allowed into their cars when the timer reached 0... 6 or more drivers got penalties so a new lobby was created...

Attempt 2 - 5 min practice 45+1 lap race

One driver lost their wheel just as we hit the 2 minute marker on the new practice session and tried to recalibrate and reset the profile but nothing worked in time... Then as we moved to the race 2 others had issues as well as half the field being ghosted... Some reported no lights as we went green to start our manual formation lap, 2 drivers got a stop and go penalty... It took half a lap before the field was solid for many of us...

There were 2 others that suffered from being kicked from the race during the race... Neither dropped from discord and one of them reported a full freeze of the screen as I drove through them over the start finish line...

There was a live stream of the race
Twitch

 

Version: 1.4.6.1
Track & Layout Used: Bathurst 1983
Car Used: Porsche RSR-74 from GT Classics
Applicable Settings: Custom skins
Report: Driver model is not visible

 

Version: 1.4.6.1
Track & Layout Used: Bathurst 1983
Car Used: Porsche RSR-74 from GT Classics
Applicable Settings: Happened online, did not try offline
Report: Gear ratio settings got bugged visibly, number on the screen being locked up in a value even if it could be changed. Resetting to defaults didn't work. Exiting and entering the setup screen didn't either. I had no option but to quit lobby and rejoin and then it was working again, but as I had been clicking like mad, ratios were all over the place obviously. Reset to defaults again and could tweak the values with no issues.

 

Version: 1.4.6.1
Track & Layout Used: Watkins Glenn GP Layout
Car Used: Nissan R89C
Applicable Settings: Single Race
Report: Right after my first pitstop the car was going around 15 km/h slower on the main straight than before. My suspect is that the boost pressure had reset itself to default value (I ran it 6% higher than default at the start)

 

Track & Layout Used: Montreal Historic 1988
Car Used: Formula Retro Gen 3
Applicable Settings: Custom Championship
Report: Rain in qualifying, race is dry. AI cars start with wet weather tyres and pit on first lap.

 

Version: 1.4.6.1
Track & Layout Used: Any
Car Used: Any
Applicable Settings: Any
Report: I'm running AMS2 on a AMD system 5800x and 6900xt I have just noticed that AMS2 no longer runs in AVX.

I have tried repair and also delete re-download and it still run on AVX running the AXV exe just switches to non AVX version. my friend reports hi intel system is still working fine on the same version.

Just Checked Project Cars2 still runs AVX so it's the latest AMS2 build

* Did a rebuild with Win10 Pro and AVX is now working - something obviously went wrong with my W11 install - strange that AVX benchmarks and Project Cars on the same game engine worked ok tho.

 

what is AVX vs non AVX? Which ones are we supposed to use?

 

Version: Current March RC, but Issues present since a few months, simply was too lazy to report it before
Track & Layout Used: Nordschleife, at least also the 24h Layout
Car Used: Any Tintop
Applicable Settings: ?
Report:

1) some weird transparent object on Nordschleife (corner should be "Kallenhard"?)
2) flickering / shaking VR image starting around after corner "Wehrseifen", lasting for a couple of corners
3) random stuttering, can happen at any track / car comb, not only Nords

more informations I've written down in here and also posted some picture and video footage of it:
VR Discussions, Questions & Feedback

 

Version: 1.4.6.1
Track & Layout Used: Bathurst 1983, Long Beach, Watkins Glen, VIR and others
Car Used: Porsche RSR, GT4, GTE, Sigma P1 and others
Applicable Settings: Cannot nail down anything that would apply...
Report: FFB has many issues...

There's been a lot of my fellow competitors suffer from FFB problems since this latest patch was released...

Some have lost all of the wheel calibration as they joined the server, I've experienced this... The only way to fix it was exit the game and reset the control profile by switching to another and then back... Some have reported having to recalibrate after this...

Others have had their inputs lock for long periods of time leaving their cars as unguided missiles for that period of time... I have experienced this in a test day others have experienced it during online races...

Some have lost all FFB but were still in control of their cars at all times, the only way it came back were if they were to exit the session and restart the game, which during a race they couldn't do... It's completely random as to when this will happen as well in my last race (which has a further report on it above) where one lost their feedback at the start of the race and another on the final lap...

Here's another drivers description of their events from a 45 minute race at Long Beach in a GT4...

Another issue is that it seems to not register multiple inputs properly... So if I was to shift at the same time as I needed to use DRS or p2p it wouldn't work... And sometimes I get double shifts... This has been something that has been going on since the December release but I put it off to something with my set up despite not experiencing it elsewhere... Others on different equipment have reported the same behaviour...

It doesn't seem connected with the wheel bases either as I'm on a Thrustmaster with some others on different wheel bases from them, a few more Fanatec reports including 2 CSL DDs as well as a Fanalabs and a Moza... These are all that I could remember since this patch was released, I am sure there was more and I wrote them off as personal hardware issues... Which they may have done themselves...

 

in the menu bottom right it tells you the version if it has AVX a the end it used the CPU's AVX instruction set to speed computation up like Physics

Could somebody with AMD CPU please check to see if your main menu release number shows AVX at the end.

e.g. "1.4.6.1.2267.AVX"

 

Mine does show AVX and i use a Ryzen 5 2600X

 

Thank you for that.
Hmm I wonder if the new AMD BIOS has broken something.

 

Version: 1.4.6
Report:
This is not an in game bug, sort of. I am unable to run custom championships that have a two-race format, as I will set a custom date for the first race, but the date for the second race for some reason is set back to months before, usually in winter. For example for a Group A race at Imola, I set the date to 5/30/1990, and in the championship the race happens on that date but for some reason the second race is set to take place on 3/24/2019. I’m unable to change this in the championship editor. Also when loading the second race directly after the first, the landscape and trees around the track are missing, requiring a game restart.

Applicable settings: i believe I created these championships before version 1.4.6 was released, so that might be a factor.

Apologies for not quite folllowing the format as this is not really an in-game issue. Hope this can get looked at in a future release.

Edit to add: deleted the relevant custom championship files in the AMS2 Documents folder, tried to make a two-race championship, and again the date of the second race is off from the first.
The dates match up in the session setting screen but in the second race settings the date is incorrect and greyed out.

 

Track & Layout Used: Indy oval (seems to happen on any track)
Car Used: formula USA (all cars)
Applicable Settings: default setup or when adding positive camber on the left side of the car/s
Report: positive camber is not visible on the wheels of the car at all regardless of how much positive camber is added
Steps to reproduce: load formula usa cars (any) and add positive camber to the left front or left rear tires.
in game photo with left front camber set to +4.6 and left rear set to +1.4

actual photo for comparison

 

Track & Layout Used: Donington National (seems to happen on any track)
Car Used: Ginetta G55 Supercup (seems to happen with any car)
Applicable Settings: Online Race with AI, no ready up before racestart
Report: When you spectate a different driver through the pit timetable screen as the qualifying ends, you start the race and are locked in this driver's POV
Steps to reproduce: Go to multiplayer, create a race without ready up and spectate a different driver through the timetable camera icon when the qualifying session ends.