Automobilista 2 Custom Force Feedback - Overview & Recommendations

Discussion in 'Automobilista 2 - General Discussion' started by Karsten Hvidberg, May 30, 2020.

  1. Rivanov

    Rivanov New Member

    Joined:
    Mar 24, 2023
    Messages:
    21
    Likes Received:
    6
    I just tested these settings with Porsche 992 GT3-R on Watkins Glen. But for some reason I still have a floating feeling. Especially on the straight, but also in the esses.

    Running Simucube 2 Pro with GSI Formula Pro Elite wheel with exactly your settings. Both in-game as in True Drive.

    Vehicle FFB is 100%.

    How is this possible?

    Screenshot 2024-04-03 100752.png
     
  2. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,138
    Likes Received:
    1,200
    Hey RicxxYou were right in your suggestion that this V700 is also suitable for low forces.I tested it and the file works great even with small forces and without creating clipping.The only changes needed must be made in the in-game settings.Gain and (FX) regulate everything.The weaker the base, the higher you have to set the gain and FX according to your personal taste.With this file everything only works with these 2 changes.These are now actually the same recommendations as Reiza makes for the defaults in the in-game settings

    Example for a weak base 2-4Nm Gain: 80-90% and (FX) according to personal taste.This means that each base can be customizedThank you Ricxx for your advice, I will also post this addendum in the customs section;)
     
    • Like Like x 2
  3. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,138
    Likes Received:
    1,200
    This is a mod car and I don't care about these cars.They are not original Reiza cars and have completely different physics and FFB from any other simulation.Maybe from PC2 maybe from NFS Shift .I'm sorry, but these cars aren't important to me
     
    • Like Like x 1
    • Agree Agree x 1
    • Disagree Disagree x 1
  4. Rivanov

    Rivanov New Member

    Joined:
    Mar 24, 2023
    Messages:
    21
    Likes Received:
    6
    Uhm. What? They are the official Reiza cars from the Endurance Pack.
    The Porsche is part the of GT3 Gen. 2 pack.
     
    • Agree Agree x 1
  5. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,138
    Likes Received:
    1,200
    Sorry had another car in mind. No, I don't notice the cars floating
     
  6. audio.pizarro

    audio.pizarro New Member

    Joined:
    Mar 8, 2021
    Messages:
    17
    Likes Received:
    2
    I have a G923 and with the defaults, the wheel always goes left to right around a dead zone in the center. To fix it, I have to use a lot of Low Force Boost but that gives me too much rattling. Maybe that is what you feel?
    Can't tell if your driver settings are right, I guess I would go with the defaults, maybe try damper at 100 (not sure about that, but I think that's what my driver is set to but G Hub is hiding it).

    I tried a lot of custom files, the best for me is:
    rFuktor 5.0.1.4 ATMOS V.1.4 FIX WITH YAW (4xFX.1WHEEL) by Stakanov

    It's doing a good job giving just the right amount of force in the center.
    You can try that or try my file, I just edited some values to make the wheel work a bit more quiet, so the gears are not knocking and rattling on every curb.
    With in game settings 95 / 0 / 0 / 35-50, it feels very dynamic what the front wheels do and every car is controllable. Still not perfect for very few cars, especially for karts, but I can also enjoy road cars or catch a slide in a Caterham like never before, the self aligning just feels close to what my own car feels like. It made me much faster.

    Hope this can help you.

    Edit: "Enable Centering Spring in Force Feedback Games" sounds wrong to me, so maybe unchecking this is better, you'll never want that. But since you have the strength at 0 it probably makes no difference.
     

    Attached Files:

    Last edited: Apr 4, 2024
  7. Alegunner68

    Alegunner68 Well-Known Member AMS2 Club Member

    Joined:
    Dec 21, 2019
    Messages:
    699
    Likes Received:
    396
    Here's my Hybrid V3.1.
    I wasn't happy with the slow speed corner strength, so spent far longer than I wanted to trying to balance it all out. The upside to this that is the force while braking is back, and I've further balanced the scrub and tear, which feels great to me but it's still not perfect.

    I'll be honest I lost a lot of hours progress one day due to a corrupt file and got sick of it so stopped for a couple of weeks for fear of losing interest in the sim completely.

    Really enjoyed finalising (ish) the file today though so I'm happy again.
    I know most people have already found their favourite file from the amazing people on this thread but here's one more.
    Gain 65
    Lfb 0
    Fx 25 ish

    EDIT: If you find the cars lose grip too soon, change line 285- slide_factor 0.7 to 0.6.
     

    Attached Files:

    Last edited: Apr 6, 2024
    • Like Like x 10
    • Friendly Friendly x 3
  8. audio.pizarro

    audio.pizarro New Member

    Joined:
    Mar 8, 2021
    Messages:
    17
    Likes Received:
    2
    Oh wow, that's another good option for me. I like it so far, will spend some more time with it over the weekend :)

    Thank you!
     
    • Like Like x 1
  9. Full Pace

    Full Pace Full Pace Simracing AMS2 Club Member

    Joined:
    Jul 18, 2022
    Messages:
    48
    Likes Received:
    9
    @Alegunner68 any recommendations for True Drive / Ingame settings?
     
  10. Alegunner68

    Alegunner68 Well-Known Member AMS2 Club Member

    Joined:
    Dec 21, 2019
    Messages:
    699
    Likes Received:
    396
    I haven't, but on my Moza I have most settings low or off.
     
    • Like Like x 1
  11. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,138
    Likes Received:
    1,200
    Hi guys!
    Maybe you noticed that I deleted the V700 again. There was a mistake that I didn't notice because I was concentrating too much on the curbs. Gabriel "Pai" Legnini brought this to my attention, thank you very much Gabriel. I will post the corrected file to you today
     
    • Like Like x 5
    • Informative Informative x 3
    • Friendly Friendly x 1
    • Useful Useful x 1
  12. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,138
    Likes Received:
    1,200
    The file is now online.
    You can find more information about this on page 394 in this thread.

    Thanks again everyone

    Danielkarts V700
     

    Attached Files:

    • Like Like x 5
    • Friendly Friendly x 4
    • Winner Winner x 1
  13. Valle1950

    Valle1950 Belgium AMS2 Club Member

    Joined:
    Mar 22, 2020
    Messages:
    132
    Likes Received:
    95
    Been using your v700 since a couple of days with my fanatec CSW v2 and I must say it´s one of the best (custom) FFB i´ve used in simracing.
    My in-game are
    Gain 65
    Lfb 2
    Fx 35
    Damping 0 (not sure about this, been switching from 30-40 also but in the end turned it off because i felt like it didn´t make a big change)
    Thanks a lot Daniel
     
    • Friendly Friendly x 1
  14. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,138
    Likes Received:
    1,200
    Using dampening in the game is not recommended.Neither in the customs nor in the defaults.It causes oscillations and unwanted vibrations.If necessary, use the damping from the base;)
     
    • Friendly Friendly x 1
  15. Josie

    Josie New Member

    Joined:
    Apr 3, 2023
    Messages:
    7
    Likes Received:
    1
    hey guys, after a 8 month break from sim racing. ive unboxed my Ts- Xw thrust master wheel. opening my custome files im still using the v200 from way back when. Can you guys point me in the right direction for the most up to date file for my Ts-Xw wheel. most appreciated.
     
  16. sillib

    sillib New Member

    Joined:
    Sep 16, 2021
    Messages:
    25
    Likes Received:
    4
    Asetek Invicta claims to be 27Nm, not 20.
     
  17. Danielkart

    Danielkart Well-Known Member

    Joined:
    Jun 25, 2021
    Messages:
    1,138
    Likes Received:
    1,200
    Thanks for the info, yes you are right. I changed it in the text
     
    • Friendly Friendly x 1
  18. Michael Enright

    Michael Enright Well-Known Member AMS2 Club Member

    Joined:
    Jul 3, 2019
    Messages:
    1,151
    Likes Received:
    322
    Here are all the up to date Customs available;
    Automobilista 2 Custom Force Feedback - Overview & Recommendations
     
    • Like Like x 2
  19. Josie

    Josie New Member

    Joined:
    Apr 3, 2023
    Messages:
    7
    Likes Received:
    1
    • Like Like x 1
  20. TinPeach

    TinPeach New Member

    Joined:
    Nov 5, 2022
    Messages:
    9
    Likes Received:
    5
    This has been superb, lovely feeling using a middle of the road R16 base. With the driving feel provided through the wheel I've been able to turn the FX down to 0 and have it blend beautifully with my haptics for additional sensations.
     
    • Friendly Friendly x 1

Share This Page