VR Discussions, Questions & Feedback

Discussion in 'Automobilista 2 - General Discussion' started by Heitor Facuri Cicoti, Apr 5, 2020.

  1. Miquel Angel Sanchez

    Miquel Angel Sanchez New Member

    Joined:
    Apr 29, 2024
    Messages:
    2
    Likes Received:
    0
    Hola a todos, me presento por aquí, haber si me podéis ayudar, me pasa lo siguiente, si enciendo el ordenador y mis VR PICO 4 con SteamVR, y inicio el juego tal como me sale respecto a la ultima vez que jugué ningún problema todo bien, pero si después se me ocurre cambiar de coche o de circuito, en el momento de darle a inicio se queda clavado, y no hay manera de hacerlo funcionar ni reiniciando el juego, y tampoco si reinicio el ordenador y acto seguido intento jugar, si lo intento al día siguiente pues si me deja y volvemos a las mismas. Tambien me pasa si he comenzado a jugar con VR con otros juegos y después lo intento con Automobilista 2..., no sé que puede ser, estoy por eliminar el juego y volver a instalarlo de cero, pero claro me gustaría no tener que hacerlo...
     
  2. chonk

    chonk Well-Known Member AMS2 Club Member

    Joined:
    Jul 3, 2021
    Messages:
    502
    Likes Received:
    265
    Try verify the game files first before attempting a full reinstall, remove any mods if you have added some. Remove anything like reshade etc. Try recreating the issue in 2d mode to rule out if it's VR specific. Just try to rule out as many things as possible, peripherals, overclocks, in-game settings etc before nuking.
     
    • Like Like x 1
  3. Nolive721

    Nolive721 Active Member

    Joined:
    May 17, 2020
    Messages:
    471
    Likes Received:
    147
    I am having the 91fps stutter glitch with both my Q2 and N3l headsets and couldn’t fix it
    Maybe I should set frame limit in NVIDIA cp or in openxr toolkit

    as per performance I am on a 5800x3d and 4080super combo and it’s doing really good but night racing in some tracks is really challenging to maintain 90fps if I have set MSAA to high to fight the awful aliasing of the madness engine

    I guess your 4090 would not bother though

    enjoy
     
  4. 2ndLastJedi

    2ndLastJedi Free speech matters AMS2 Club Member

    Joined:
    Sep 7, 2016
    Messages:
    4,904
    Likes Received:
    2,150
    Set a 90 fps cap in NVCP or Rivatuner.;
     
    • Like Like x 1
  5. Bull Shark

    Bull Shark "Later has already begun." AMS2 Club Member

    Joined:
    Jun 30, 2019
    Messages:
    1,167
    Likes Received:
    499
    Thanks, I have a 4080 Super as well.
     
    • Like Like x 1
  6. Nolive721

    Nolive721 Active Member

    Joined:
    May 17, 2020
    Messages:
    471
    Likes Received:
    147
    lol I thought you bought a 4090

    well enjoy the 4080s as much as I do then
     
    • Like Like x 1
  7. Bull Shark

    Bull Shark "Later has already begun." AMS2 Club Member

    Joined:
    Jun 30, 2019
    Messages:
    1,167
    Likes Received:
    499
    Thanks. The 4090 is a bit over the top price wise. For a few frames more you have to pay €500/€700 more. :eek: the 4080 super performs more than ok for me.
     
    • Agree Agree x 1
  8. Miquel Angel Sanchez

    Miquel Angel Sanchez New Member

    Joined:
    Apr 29, 2024
    Messages:
    2
    Likes Received:
    0
    Hola, gracias por tus recomendaciones, he verificado los ficheros pero sigue igual, solo me pasa en modo realidad virtual, ayer noche después hacer una carrera con Assetto Corsa en VR, lo intenté con Automobilista 2 y no me dejaba iniciar el juego, en cambio con pantalla todo bien, no sé si hay algo en concreto de configuración que pueda mirar? Si no cuando pueda lo desinstalaré...
     
  9. chonk

    chonk Well-Known Member AMS2 Club Member

    Joined:
    Jul 3, 2021
    Messages:
    502
    Likes Received:
    265
    You're very welcome, you could try deleting your AMS 2 folder in Documents, that may flush out some odd setting that's creating an issue. Other than that I'm not sure what to suggest. I use Virtual Desktop + OpenXR rather than Pico Connect and SteamVR. But I doubt it's a Connect issue as it tends to just work. Hope you get it sorted.
     
    • Like Like x 1
  10. Tuborg

    Tuborg New Member

    Joined:
    Mar 1, 2020
    Messages:
    10
    Likes Received:
    3
    Pimax Crystal/Light "125 Fov"? quest-3-measured-fov-compared-to-other-headsets-v0-ninayh23vqsb1.jpg
     
    • Informative Informative x 1
  11. 2ndLastJedi

    2ndLastJedi Free speech matters AMS2 Club Member

    Joined:
    Sep 7, 2016
    Messages:
    4,904
    Likes Received:
    2,150
    80 vFOV for the G2??? No way haha, i get 96. Crazy how much this measurement changes face to face.
     
  12. Tuborg

    Tuborg New Member

    Joined:
    Mar 1, 2020
    Messages:
    10
    Likes Received:
    3
    Yes, it is very individual which fov you get, but it is interesting to see the difference between the brands!

    Reddit - Dive into anything
     
  13. gmorris

    gmorris New Member

    Joined:
    Oct 19, 2023
    Messages:
    2
    Likes Received:
    1
    In the past week or so my crystal has suddenly decided to lock itself to half frame rate even when the option is unchecked. I get 60hz in 120 mode and 45 hz in 90 mode. The only way I have found to get full rate in AMS2 is to start the game and then check 'lock to half frame rate' and apply and then uncheck and apply again which gives me the full 120hz. Anyone else getting this?
     
  14. JavierZumaeta

    JavierZumaeta Active Member

    Joined:
    Aug 28, 2020
    Messages:
    244
    Likes Received:
    134
    I wanted to share something with you guys. It's a guide on how to make sure your VR is set to high CPU priority permanently.



    I've been having for about 2 months now a lot of stutters and black screens, and I think it's because of the VR headset losing CPU priority to other applications that may be running in the background. In my case I was even getting black screens that could last 2 or 3 seconds, and when it would come back, I'd be in the wall with a wrecked car. And if it's multiplayer (thankfully it never happened) but I might have taken some other people out with me.

    So I was changing the CPU prio on the Task Manager details tab, but it wasn't sticking. It would go back to Normal every time the VR is launched. So setting the permanent setting should fix it.
     
  15. Phantas79

    Phantas79 Member

    Joined:
    Mar 9, 2024
    Messages:
    99
    Likes Received:
    35
    Try Process Lasso ;)
     
  16. LostPatrol

    LostPatrol Member

    Joined:
    Jul 21, 2023
    Messages:
    83
    Likes Received:
    46
    I would only start to mess around with this stuff if turning off HAGS hasn’t worked. That seems to sort out various form of stutter in AMS2 for a lot of people and is pretty quick to turn off and on depending on the game.
     
    • Agree Agree x 1
  17. Bull Shark

    Bull Shark "Later has already begun." AMS2 Club Member

    Joined:
    Jun 30, 2019
    Messages:
    1,167
    Likes Received:
    499
    I’ve set a 90fps caps on all places I can but still a 1 frame stutter. When I use the OpenXR toolkit I have a frame adding problem. It goes from 90fps to 91fps. When I use just the Oculus Home, I see a 1 frame stutter, from 90fps to 89fps. It is very annoying. It is not constantly but often on the same location on a track. I really don’t know what to chance to keep this from happen.
    Even when I lower the setting it still occurs. Even when I set the max fps In oculus home to 75fps it happens, (Normally I run it with 90fps) But then from 75fps to 74fps. So it has nothing to do with a to high setting in one or all the applications I use.
    I even set the precise fps of my monitor in the xml files in the AMS2 documents folder. This because it can give latency problems. (What I have been told).
    If somebody have an idea what to alter to make this 1 fps dip go away…. :( Please post it here. :D
     
    • Like Like x 1
  18. 2ndLastJedi

    2ndLastJedi Free speech matters AMS2 Club Member

    Joined:
    Sep 7, 2016
    Messages:
    4,904
    Likes Received:
    2,150
    Weird man, sorry not sure what it is as I don't experience that at all. I wonder if that is the "AMDip" I've read so much about.
     
  19. Nolive721

    Nolive721 Active Member

    Joined:
    May 17, 2020
    Messages:
    471
    Likes Received:
    147
    You mentioned a certain portion of a track right? Can you share where it occurs?

    also does that happen in daytime or night?

    i give you 2 examples of my own experience both hockenheim and Virginia raceway were giving me lower fps and sudden frame time drop on specific parts of the tracks usuall some slow corners

    I had to reduce resolution to get back a locked 90fps

    I would play with resolution and see where your stutter threshold sit



    just a thought
     
  20. Bull Shark

    Bull Shark "Later has already begun." AMS2 Club Member

    Joined:
    Jun 30, 2019
    Messages:
    1,167
    Likes Received:
    499
    Yeah I read a lot about the frame drops with a 7800X3D. But as far as I see, they talk about high frame drops. I have constantly 1 fps drop.
    I see that there is a new driver version. Will try that one. Strange, the game runs silky smooth on 90fps. Besides the few 1fps drops here and there on a track.

    it occurs on any track. Mostly around the same postion on a track. Not exactly the same spot. It looks like that those positions are more demanding for CPU and GPU.
    I will start with a clean installation. No mods etc. And see if this will remove the 1fps drop.

    EDIT:
    Looks like I found the problem.
    Updated the drivers and set the Link Sharpening in teh ODT. From quality to normal.
    But I presume it was the update of the driver. I still see the 1 fps drop, or raise but it won't give a stutter. It is back to silky smooth.
     
    Last edited: May 5, 2024
    • Like Like x 1

Share This Page