Simhub - bass shakers Wheelslip

Great that it is working now and that is a good info for me. I will check if all relevant data is available in UDP mode and if yes I can maybe add support for the UDP mode, too.

 

I'm sorry, your plugin don't have an installation file.

 

@TronLi
I added support for the UDP Mode now, maybe you want to test if it is working:
Release CalcLngWheelSlip-v1.4.4 · viper4gh/SimHub-Plugin-CalcLngWheelSlip

 

Just tested and can confirm it works in both modes now, that was fast!

 

Hi All,
I rewrote and added information from Viper's plugin, which I found most useful for Brake Lock.
I also changed my own custom effect, which is now sway only, because Viper's Brake lock effect is better
I also added Ragesaq profiles from pedal motors adapted to shakers.
Overall I really like the effect, made me enjoy using my shakers again.
Tested mostly with JCW mini at brands hatch Indy, and the F3 at Spielberg.
You will have to alter volumes, frequencies and gamma curves to suit your shakers.
I suggest you dont play with the calculations unless you are really sure.
Please let me have any feedback.
Thx Rangey

 

A new effect is now possible with the changes to SimHub to allow calculated frequency for the output. So here is a shaker profile for braking that uses wheel rps as the base frequency, and the amount of slip from vipers plugin.

 

UnderSteer, Oversteer, Front Slip and Rear Slip effects for AMS2. Any Feedback welcomed.

 

Thanks for sharing. The rear slip is really good run through my pedal haptics. Better than what I was using (Viper Plugin). Can't comment on the front slip and under/over steer. Having all 3 of those effects on the same pedal at once is not good.

 

this is a simhub profile right? do I still need the plugin? is it ready for the latest version of ams2?

I am new to all this shaker thing I have 2 Dayton bst-2 shakers front rear setup.

this is what I came up with. (see pic)

 

Hi Mate,
I suggest you use the version in post #67, this is the latest version.
RR

 

those are only the effects written in the description? no rpm etc?

I don't wanna mess up what I have no so I need to be sure before I screw things up

 

That is correct. When you import them into Simhub, it will create a separate profile with just these effects. You can then copy and paste them into your existing profiles with all your other effects.

 

are my settings any good? i know they are basic, any advice on Hz settings?

 

Trying to to wrap my head around this and dial it in for my pedal Rumble motors (3dRap 1x Gas and 1x Brake) and my NLR HF8 (Haptic Seat Pad).

I have been trying to get @viper4r working well (Slip and Lock on 4 axis on Seat) with his plugin. I am trying to implements @RnageyRover enhancements, but for Rumble/Haptic motors (I don't have shakers). As a new (old) sim racer I am trying to learn/feel the limits of slip, lock, over/under steer, trail braking etc. Ands seems @RnageyRover tweaks sound like thew better separate these out and @Shodan0000 seems to have this figured out as well.

Be great to get everyones latest updates/settings/input especially considering the new AMS2 1.6+ and SimHub, etc.

Can anyone give me some pointers on setting this up for Rumbles/Haptics Motors instead of Shaker.

@bob jackson You have any luck getting you setup working?

 

You should be able to transfer the formulas straight over. Ignore the Frequency stuff it's only relevant for shakers. Here is the latest. Good luck, let me know if you are struggling and I'll try to make time for a motors version. I have a HF8 but dont use these on it.

 

Thanks @RnageyRover !!!!!

I will give it a shot. In the meantime I did see you post on the Sim3D discord:
Discord - Group Chat That’s All Fun & Games

I don't have the Sim3D rumbles, but I do have the 3DRap which seem to be very similar so figured the Sim3D profiles (like yours) might be a good starting point. I also have the 3dRap wind.

I don't want to derail this thread so if its ok maybe I will send you a PM if/when you have time.

Thank you sir!
Geo

 

Not exactly on topic, but related. I'm considering buying some led strips and using simhub to drive them. I'd like to set them up to provide slip/lock meters for traction and braking, one for each wheel. Is this possible? And if so, using the same formula(s) in this thread?