Automobilista 2 Custom Force Feedback - Overview & Recommendations

There is a variable called something "bandwidth", default set at 0.06 as I remember.
Please see if it makes a difference to adjust that on up to maybe 0.2 or even 0.4?

Cheers

 

for those like me who are looking for braking sensation.
here are the 2 best custom which are still perfect in 1.0.
I admire the 1.2 but I just discovered the santos 1.0 and level brakes is really very good.
thanks to santos and karsten i think that without you i would have dropped ams2

Silver Santos v1.0 - F. Santos / Karsten
Silver Raw v1.2 - Momentum Rack 2.0 - Karsten

 

No change, what i did notice was that the third bar in telemetry was going to maximum while the others weren't moving, on right handers the bar goes to around two thirds at most.
This is at similar (nowhere near clipping) speeds to keep things as similar as possible.

 

It's so weird!
We are aware of a bug that kills variables, but so far it has been constant for the same version of the game and custom file across machines.

...

Which was the last working silver raw that you know of? If you remember...

 

One of the early ones..
I'm starting to think there could be a fault developing on my wheel, that isn't being picked up when i use the heavy messing files.
@F.Santos can you try, and tell me if you get the same?

 

good after a few hours of driving the santos 1.0 is perfect with this version 1.0 in recent really all the nuances.

Silver Santos v1.0 - F.Santos/Karsten

 

[QUOTE = "Alegunner68, post: 84365, membre: 11824"] L'un des premiers.
Je commence à penser qu'il pourrait y avoir un défaut sur ma roue, qui n'est pas détecté lorsque j'utilise les fichiers de mess lourds.
[USER = 14476] @ F.Santos [/ USER] pouvez-vous essayer et me dire si vous obtenez la même chose? [/ QUOTE]

test his Silver Santos v1.0 - F. Santos / Karsten.
I could notice in the old messages that I often agreed with your remarks.

https://forum.reizastudios.com/attachments/ffb_custom_settings-txt.7167/

 

I think it's a good basis
60/50/50

 

I moved houses and have no internet atm I will try to hotspot and test stuff but until the 8th cant promise

 

Thanks, there is more feeling in that one, somethings
changed though in the later one's that don't like my wheel.

No rush, get settled in your new home

 

I really hope you figure it out.. That's a shame with your nice wheel base! Just posted a tweaked version 3.0... Who knows, maybe it works for you too with some luck..

Cheers

 

I'll try it later, thanks.

 

Good morning
how come i cant see the file New Custom FFB - "Heavy Messing" (NuScorpii) in post 3 to download

 

Thanks for pointing that out. I have no idea why it wasn't there any more, I've uploaded it again to post #3.

 

To me it still lacks:
Better scrub, more pronounced kerbs, LFB on details and bumps, so they both don't disappear outside of center.
Without those it feels kind of dead.
Even more it lacks friction and momentum resistance on steering angle changes. The steering feels like a lose rubber band around the center, specially at low Lfb, which is really preferred on higher end wheel bases.

I think they will soon start work on these ffb issues as v1 is out. These things are only minor on top of what's already there in default, technically.

Reiza devs have access to far more information than custom ffb allows, so my big hope is that in 6 months it will feel much better using default than what the current custom ffbs do. Then the custom ffbs might be considered too much hazzle for very minor changes.

But until then I will keep using custom ffb files.

Cheers!

 

Where did you post this V3 version?

 

2nd post of this thread.

 

Deleted

 

Hey man, so I managed to download the latest BETA with the V1.0 content, but I cant download the full release cos my internet is horrible.
Did a few laps in Bathurst and Curitiba FFB feels weaker somewhat in general, but nothing else, Im using the last Nus-HeavyMessing before the V1 version.

Which one are you using, the same? Are you losing ffb? around the lap or straight out of the pits?

 

Hello Karsten,

I have been away from the game in the last couple of weeks and just upgraded to 1.0 last night. I was also slightly disappointed with the default FFB so I am using your custom file instead.

On this point below, which parameter would need to be modified to further improve. The Friction?something else more specifically?

my TS PC wheel is say mid to high end belt driven wheel so I could indeed increase further the friction from the 0.04 you set in your file, right?

Even more it lacks friction and momentum resistance on steering angle changes. The steering feels like a lose rubber band around the center, specially at low Lfb, which is really preferred on higher end wheel bases.

 

I'm using the latest heavy messing file, cornering ffb feels excellent but hasn't got much straight line feel, whereas the silver raw file has excellent straight line feel but rubber bands in the corners (mostly left handers for some reason).
I'm going through the thread to look for some older ones to try again.

 

Hi NoLive, welcome back then!

Yes, you should be ok to adjust that higher. Maybe try something in the interval 0.07 to 0.1, if you feel it too light.

And if you did not yet, then go for a ride in that new GT4 on Bathurst!
JC it's awesome! Did a multiplayer session of 24 ppl yesterday & that combination is just a killer

Cheers!