Automobilista 2 Custom Force Feedback - Overview & Recommendations

Man, I absolutely love this. My only issue with DKs ones (CSL DD 8Nm) was too harsh vibration from the road unless I went down with FEI insanely low. For some magic reason your build is not doing this. So again, thanks to all tuners involved in.

 

Thanks for the answers

In the end I downloaded the @Danielkart V900 version, I have set the values indicated from newtonpg the steering wheel control panel, and I have put the values indicated by Alegunner68, in the game, and it's going very well.

Thank you all!

 

So you could say, excellent teamwork

 

Quite new to AMS2 and wanted to explore the custom FFB files. I'm currently using V12 of your custom FFB file, but there are 2 thing I'd like to explore ... when driving over curbs, I find the car wants to quickly "fall-off" the curb and when I counter this force I inevitable start osscillating the steering wheel and the result is not elegant. What variable can I adjust to lighten the car veering off the curb? Second, at high speeds, I find I can steer with as little as 2-3 degrees and the car is too responsive .. again this leads to steering ossillations as I'm trying to counter the effect to drive a straight line. What can I change to dampen the steering sensitivity at high speeds? I'm on a Logitech G-Pro Direct Drive Wheel.

 

Is there any way to separate the Lateral Scrub and Tear effects, from the Longitudinal Scrub and Tear effects in the FFB files?

 

Can you describe in more detail what you want to achieve with longitudinal forces and lateral forces? In which driving situations do you want to disconnect? Due to the G-forces, there are limits to a simulation. In some cases it can be simulated with motion, but here too there are no real G forces

 

I am trying to reduce the shuddering under acceleration, the feeling of the tyres slipping under power, especially when the track is wet.
But I don't want it to affect the scrub when turning.

 

I think that might be a product of the current physics. Do you have the same issues with the F-U G2 and SCB 24?

 

I only touch kerbs (pun intended ) in # surface transitions section. You can cancel the effect just by adding "#" in the line (rack_coarse_lfb (+ rack_coarse_lfb (* 0.65 surfaces_mov)))
Everything else is just physics engine related.

 

Hi all, here's an update to my version of V900 file.

 

Hey guys!

V1000 is now ready for youThis will be my last file for now until Reiza releases update 1.6.I will then decide whether the tire update requires a change to the FFB.
As with the V900, I give the following recommendations for the in-game settings and the base settings for the V1000:

Optimized for Simucube 2 Pro (25Nm) (My reference base)
Optimized for Simucube 2 Sport (17Nm)
Optimized for Moza R21 V2 (21Nm)
Optimized for Moza R16 V2 (16Nm)
Optimized for Moza R12 V2 (12Nm)
Optimized for Moza R9 V2 (9Nm)
Optimized for Fanatec Podium DD1 (20Nm)
Optimized for Fanatec Podium DD2 (25Nm)
Optimized for Fanatec CSL DD Base (8Nm)
Optimized for Simagic Alpha Mini (10Nm)
Optimized for Simagic Alpha (15NM)
Optimized for Simagic Ultimate (23Nm)
Optimized for Assetek La Prima (12Nm)
Optimized for Assetek Forte (18Nm)
Optimized for Assetek Invicta (27Nm)
Optimized for VRS (20Nm)
Optimized for Cammus C15 (15Nm)
Optimized for Cammus C12 (12Nm)


Change log of the V1000 file:

1. The rocking of the wheel in cars with high downforce and high speeds could be slightly reduced again
2. Grip level has been adjusted
3. New interpretation of slip_crossover values.Only the beginning and the end are calculated.Everything else doesn't work in my file or disturbs the FFB
4. Acceleration and acceleration feel based on vehicle weight has been adjusted
5. The centering has been increased and with it the liveliness of the steering and the wheel
6. The base settings have been slightly adjusted for individual bases

Have fun with it

Danielkarts V1000 for all bases

 

Daniel, this is the best one so far!
I just did a race with the Reiza Porsche Cup Cars at Le Mans and I was able to catch slides like never before. Nicely done!

 

Is this an update to your Hybrid File or your version of V900?

 

Ok, this is really good. Only one thing: can I somehow reduce the strenght kerbs are pulling the wheel with, please?

 

Yes, reduce this value (kerb_bump_scale 5.00) to your personal taste

 

Awesome, thanks! I will have to use 2 files, one for small radius formula/modern prototype, and the other one for vintage cars with wider steering wheels. Damn 8Nm base is so weak for these.

 

Yes I understand . With a 32 diameter wheel you reach the limit of 8Nm. But you intuitively do the right thing

 

If it was 32... I have a 35cm rim too .

 

Sorry, it's a version of V900.

 

Is there any documentation that explains what some of the variables within the custom ffb file does? Trying to understand the structure between all the various files available in this thread but can't see much in terms of how to make certain changes to affect what I'm trying to achieve on my setup.