I see AI going 2 wheels off track at T1 at race start at Kansai (which also is related to missing behavioural tweaks that will follow later), but...
It was mentioned several times by now, that F3 revision is still work in progress.
They will be addressed, but they can still have issues until 1.4.
Not deleting that, no need to. Just open a thread about it if you want to, so the topic here doesn't steer away too far off-topic! :) EDIT:...
Just open an own topic about it in the general discussion forum and keep it civilized, then it's all good. ;) EDIT: Dedicated Topic opened. Keep...
Please tell me the tracks you have tried.
Most of us probably use the term increase for "more negative camber" because of it being quite common.
Please reset the Superlight to default setup for a try.
When the back end comes out in a corner then it's called oversteer. ----------- Gearing of F-USA is how it should be.
Please read the opening post. GTE and GT3 are a similar category with clutches and not made for standing starts.
When you press the clutch pedal, you disconnect the clutch disc from the engine flywheel. Coming off the clutch pedal again connects the clutch...
Clutch, engine, brakes and gearbox wear out on you in AMS2. Especially clutch, brakes and engine receive wear without mishandling and you can lose...
Only from the pits.:whistle: But applying high torque and lots of flash heating to the clutch when releasing "too slowly" can burn it definitely....
Come off the clutch quicker or/and use lower RPM, i can reproduce it if being too slow with the clutch pedal. It's not made for much slip but we...
Engine heating/wear, gearbox, clutch damage, brakes, so the wear specific damage types are mechanical failure department and not affected by the...
Increase rear wing or decrease front wing + raise front ride height by 2mm. (And don't be afraid of using maintenance throttle into tricky braking...
Only Preload and clutches are adjustable for these cars deliberately.
Automobilista 2 June 2022 Development Update
Newest AMD driver that has dropped today should work fine again according to some user feedback.
Good to know, spread the word! :)
Separate names with a comma.
