Automobilista 2 Custom Force Feedback - Overview & Recommendations

Unfortunately, the large forces after a spin are a general problem in Ams2. The defaults were corrected with the last updates but unfortunately with other side effects (again my personal opinion) I have already greatly reduced it in the file and am almost at the limit. I also think that 10-12Nm peaks are completely sufficient for an intensive and authentic driving experience. In the past it was hardly possible, for example in Monaco, to get around the curves in an F1 car. Turn onto grass? Just try to stay on track, it's more fun You can also try reducing the (understeer_scale 1.85) a little along with increasing the (slide_factor 0.5) a little. But be careful, the file reacts very sensitively to major changes, which then always leads to new combinations for me and also makes them necessary. Maybe it helps you a little and there are many other Customs files or the defaults, in the end it's always a matter of taste

 

I fully agree, and exactly these feelings are the ones I have been tuning in / out on my config file.

The one I can't crack yet is that dangerous spike on the conclusion of a spin.
Almost like the tyre flex snap back from the rear tyres coming through the rack?

 

Hi Markus! This is very interesting, I have already received several feedback from Simucube owners that the 3rd file in particular works well. Can you tell me your in-game and simucube base settings? Many Thanks

 

Yes at nearly 20nm it's a wrist snapper , hands off the wheel job for sure .
Did you manage to tune in any front grip loss feel ? I've not had any joy so far .

 

Hi Aza! Sorry for my interference. Do I understand you correctly that you want to use your full 20Nm? At the base 100%that corresponds to 20Nm? Then I understand you now. My file is of course with 12-13Nm peaks. If you want 20Nm peaks then change the following rack_momentum_l (* 11 (jump tyre_l 100000 1 1) mom_FL)) and
(rack_momentum_r (* 11 (Spring tyre_r 100000 1 1 mom_FR)). Both values reduce 11 to maybe 7 or even 6. In addition, I would reduce IN-Game FX a little bit. Greetings Daniel

 

Give this a whirl - for Simucube - Falloff is subtle just after the scrubbing.
Please live with it for a few days. I'll pop my Game settings and my TD profile in later but It's 40 gain in game.

 

Thanks Octo , will give it a run later on . Very much appreciated.

 

Hi Daniel . Thanks for sharing, will have a play later on . Cheers.

 

Very new owner of a Moza R9 with CS wheel after ditching the logitech DD GPRO I had for a month
Any user here that would recommend a Custom file and in Game settings for the R9?
Thanks in advance

 

Also thinking about buying a Moza equipment. Is it supported by AMS 2 or must you do a workaround when calibrating ingame?

 

Hi guys! I posted a 4.Custom file on page 306. This is only for belt bases with 2-5Nm. Now, in my opinion, the difference between the bases is even smaller and it should be easier for people to find something suitable. Have fun with it

 

No real workaround but just creating a controller profile specifically to run bindings assignment then wheel calibration.
I have used Direct Drive Generic Option for that matter and it worked fine for my R9 wheel.

 

So no Moza R9 love over here? It's a great wheel in other Sims but i confess struggling to fully enjoy it in AMS2

 

File: V50 from Daniel for dd bases 10-30Nm (the first one).

 

what are the best in game settings for csl dd 8nm with rfuctor v50 custom file

 

Says in the file

 

only for the dd1 and dd2 not csl dd

 

If you download the right one of the 3 @Danielkart has uploaded it says the settings in it. They are all made for 3 different power outputs.

 

where can i find them

 

Page 306