Automobilista 2 Custom Force Feedback - Overview & Recommendations

I'm using a T150 using recommended settings and the centre of the wheel is too heavy for me even at low speeds. How can i remedy this?

 

Try higher files and it will be easier
The higher the custom file number, the lighter the forces become. The deeper the custom file number, the stronger the forces become. So #1 works with the strongest forces and #8 works with the lowest. I'll post it as an addendum

 

Hi Daniel,

now I have to ask again as a precaution. I am looking for the correct file for the Logitech G Pro Wheel with a maximum of 11NM. I have to use version 5, right?

As an example similar to the "For Simagic Alpha Mini 10Nm"?

Thank you, Thomas

# NAME: rFuktor 5.0.1 - By Karsten with Shadak & Panos
# V500 File 5

# Best of Karsten Hvidberg
# Custom force FFB File from Daniel V500

# Suitable for all Bases and Forces from 10 to 11NM tested with 10,5Nm

# Optimized for Simagic Alpha Mini (10Nm)
# Optimized for Assetek La Prima (12Nm)

 

Version 5 seems to have too little power, because I have to set the FFB in the base (11NM) and in-game to 100%.

And which damper settings do you recommend if the steering wheel starts to oscillate, especially at high speeds? The damper is currently set to 0 ingame.

 

Hi Zebra. I posted in September a file for T818 but after many hours and tests (3 months of tests every day since my last post ... here is my new file i drive with , regarding the T818. I am very happy with it. I know Daniel has sent several files for different bases that i didn't tested yet but mine is very immersive You can test and tell me. Cheeers

 

What is best file for ts-xw

thanks

 

Hello!
Always test the recommended version number first. If it is too strong for you then go a file number higher or even two. If it's too weak for you then go a file number lower or even two. It's always a question of how the base processes the energy and also personal taste.

 

You have vibrations because you use 100% gain in the game. Do not take any dämping . Go back with file Nr.

 

File 2 or 3 or 4 and then decide according to your feeling

 

Okay, then I think I've understood it. I have now taken number 4 and only set the FFB to 90% ingame. The oscillation is almost completely gone. I've also set the dampers to 0 in the wheel and in-game and it drives great.

Many thanks for your files and support. Have a nice evening.

 

Hi! Could you share your ingame settings/wheel base settings please?

Edit:found them in the file, though your settings are turned up way to high, the wheel is very strong and I feel like I could break my wrist playing with those

 

@Danielkart. Thank you for the V500 and work you've done.

 

Hi @Danielkart ,
I am running a Fanatec DD1, and have used your file #8 (16 to 18Nm)

Im pretty inexperienced with tweaking FFB.
It feels very good, however just a question. Is there a reason why FEI is set relatively low (20%-30%)?
Is it not better to turn this up to gain more ffb detail?

Thanks!
Paul

 

Good morning!
Before Simucube 2 I had a dd1. There are many reasons why (FEI) was set so low for me on a dd1 in combination with (Int). There were also countless discussions about it that didn't achieve much in the end. Take your preferred settings from the base if you don't have a good feeling about it, if the feeling is good then there is no reason to change it

 

What is FEI?

 

An amplifier for the FFB in the Fanatec software. Nothing to do with your Simagic Denis

 

Okay, thank you

 

My first go on dd didn't go well, got through eau rouge and disconnected.
Back to simhouse and it was connecting/disconnecting constantly.
The usb was super loose, turned out the centre piece had snapped off!
The place I bought it said to contact moza then the alarm bells started.
The supplier should replace the faulty goods, and not get the customer to try and sort it.
I'm too old for all this email back and forth ping pong nonsense.
Not happy.
Might just replace the port myself.
Sorry for the rant, just had to get it off my chest.
Edit: They're sending me a new pcb. Happy day.

 

Hey buddy!
Oh no, I'm sorry for you that you're having trouble with your dd. I hope Moza will react quickly and show goodwill. It's really annoying, and your frustration is understandable. I hope you come back soon

 

I don't usually venture outside of my AC bubble/community, however I felt it necessary to create an account and say thanks to @Danielkart for the v500 FFB, it's magnificent!

I'll add a direct link to your files, and upload them to the mods section of our discord for easy access.

Great work, and sincerely appreciate!