Bug Reports - Automobilista 2 (Read the Opening Post)

Game Version/Build: 0.8.3.2.1135.AVX
Track & Layout Used: Donington
Car Used: Formula classic G3M3
Applicable Settings: testing day
Report: hitting pylon in first corner loosing right front wheel
Steps to reproduce: hit first pylon in first corner

 

Game Version/Build: 0.8.3.2.1135.AVX
Track & Layout Used:
Car Used: Formula classic G3M3
Applicable Settings:
Report: full throttle lift when shifting
Bug? In real there was no lift neccessary, whatch / hear here Brabham Judd V8 1990

 

Game Version/Build: 0.8.3.0.1133.AVX
Track & Layout Used: Interlagos modern version
Car Used: super v8
Applicable Settings: irrelevant
Report: I went straight on at the end of the pit straight into the run off area at the end of a race finished to do some donuts and the car went through the left hand barrier and below the grass / ground and into the sky constantly barrel rolling.

 

Game Version/Build: 0.8.3.2
Track & Layout Used: N/A
Car Used: N/A
Applicable Settings: N/A
Report: I have a mixed controller setup, I have a G29 wheel and Fanatec CSL Elite LC pedals and it is not possible to setup this configuration, my pedals seem to not be recognized and I have selected "Separated" as "Pedal Type", I think AMS 2 is expecting that a G29 pedals is connected.

 

I also have this issue with T300 wheel and G25 pedals. I set them up in the first release and have to keep restoring my savegame folder.

 

Still the same problem in version 0.8.3.2 at Imola track
Gpu (1080ti) with a 99% workload and 100% current draw !!!!! in a night time session (even if you use 7 PM hour)
On another track (night time) Gpu is at 70 % workload and 35/40 % current draw.
In ProjectCars2 which uses the same graphics engine (Madness Engine) there is no problem.

 

Game Version/Build: 0.8.3.0.1133.AVX
Track & Layout Used: Snetterton 100
Car Used: GT5 Puma 052
Applicable Settings: Race, 30 opponents, AI skill 100,
Report: Game crashes a few seconds after finish, when external replay camera turns on. Happened 2 times in a row now, 5 lap and 2 lap races.

 

Not a bug, per se, but a feature that misbehaves.
Report: While racing, press [Esc] to enter the pause menu and choose [Settings]. If the wheel is not aligned on center, the settings will rapidly change between available options.
I recognize that this is a feature (for those that like it) - to navigate the GUI by turning the wheel, but it would be nice to turn this off.

Ryzen 5 2600x, 32GB RAM, 970 GTX, Thrustmaster T500 RS, TH8-A Shifter

 

Track & Layout Used: Londrina short
Car Used: FVintage or any other
Applicable Settings: Testday
Report: Pitboy glitches through the wall
Steps to reproduce:start testday at Londrina short

 

Game Version/Build: 0.8.3.2
Track & Layout Used: All
Car Used: Sprint-V8-stock car-maybe other
Applicable Settings: yes
Report: tire temperature during practice - qualify always too cool.

Even after 8/10 laps , you are not able to warm up compound temp (modify tire pressure, doesn't influence the result).
In race mode (with some cars): tire temp start with 85 degrees..... but lap after lap...... temp is falling down betwen 45 to 65 degrees.
PS
tyre temp in "bottom right" HUD display, does not mach with tire temp telemetry HUD display.

 

This is an issue in VR and Monitors. Please fix, otherwise we constantly have do re-adjust position for each car... Otherwise, amazing job on this product, the FFB and tire grip is absolutely the bets out there..

 

Track & Layout Used: All
Car Used: Many
Applicable Settings: Practice
Report: At the beginning of a practice single player sessions, many cars don't respect the manual ignition/starter settings when coming out the pits, they simply start by themselves. A few cars respect the manual start sequence (more fun with buttkickers) but I believe I was in a AI race (vs practice).

 

This may have already been reported, and it may not be a bug.

I have the impression that there remains an identical bug as on PC2. When you choose no assistance in the gameplay menu, it does not completely deactivate the TC and ABS.
For example F1 Reiza, there is still 15% of TC and also ABS.

In addition to this, the configuration of the TC is not very clear.
It seems that to completely disable the TC, it should be set to 100%, as is the case on PC2.
Can you confirm please?

 

Game Version/Build: 0.8.3.2
Track & Layout Used: Brands Hatch & Oulton Park (not tested other tracks)
Car Used: Puma GT5
Applicable Settings: 5 lap race, identical cars, sunny weather, 13:00, maximum 29/27 AI
Report: AI cars driver and tyres only, see video

Game Version/Build: 0.8.3.2
Track & Layout Used: Brands Hatch
Car Used: P4 MetalMoro
Applicable Settings: 5 lap race, Multiclass race with 2 classes P4 and Caterham Superlight, sunny weather, 13:00, maximum 29 AI, player starting last (all visible in video)
Report: Multiclass racing appears to be broken at themoment. AI car allocation is 28 P4 cars and 2 Caterham. I selected Player starting last but was placed second on the grid (See video)

 

Track & Layout Used: Jerez
Car Used: F-Classic Gen1
Applicable Settings: n/a
Report: front wheels vibrating while sitting in neutral in pitbox
Steps to reproduce: Select car to start session leave shifter (in neutral)...issue clears with gear selection.

 

Track & Layout Used: Kyalami
Car Used: F-Classic Gen3 M1
Applicable Settings: n/a
Report: Driver's helmet and body impinging into airbox and seat bulkhead
Steps to reproduce: Select car to start session

 

Track & Layout Used: All Lodrina tracks.
Car Used: Superkart
Applicable Settings: Test day. (None manual pit control)
Report: The kart always drives out of the pits the wrong way, and either gets stuck and bugs out, or sometimes it will smash its way to the track taking all sorts of strange routes.
Steps to reproduce: Run the Superkart at any Lodrina track, with auto pit control.

The Superkart is frigging awesome BTW.

 

Track & Layout Used: N/A
Car Used: Superkart
Applicable Settings: Clutch both auto and manual.
Report: The Superkart is listed as 'H-Pattern', should be 6 speed sequential.
Also, the clutch doesn't seem to work at all. Whether on auto or manual. (Logitech pedals, all assigned/calibrated properly.)
Steps to reproduce: Run the Superkart and try to rev the engine with the clutch pressed.
Edit: Oddly, it does seem to matter whether it's pressed once actually moving and changing gear 'Only' when you choose 'Manual clutch', but it still doesn't work as it should the rest of the time. (Dipping clutch while driving, using when stopped etc).

 

Track & Layout Used: Jerez (chicane)
Car Used: Formula V12
Applicable Settings: Weather - medium cloud 89F air - 101F track
Report: pit limiter not automatically coming off until T3
Steps to reproduce: return to pits and it still does it.


(i cant put all this in my signature)
PC Rig:
GTX 1080 sli (G1 gigabyte) HB Aorus bridge
i7 6800k
asus x99 ROG STIX GAMING mobo
64GB corsair vengeance LPX DDR4 3200 Mhz (4 x16GB)
500BG Samsung 850 EVO M.2 (THIS IS WHERE EFT IS STORED)
3TB WD Blue hard drive SATA
850W corsair RMx Series fully modular silent PSU
Monitor: Acer Predator 144Hz Gsync 27” 1440p (main)
Monitor: Acer 27” 1080p 75Hz freesync (secondary)

Rig:
GT Omega PRO cockpit with RS9 seat
Fanatec V3 pedals with BPK, damper on throttle
Thrustmaster TSPC Racer w/Lamborghini rim

 

This bug appears to be due to the car automatically having severe damage as shown by the severe damage message and orange button on screen. I can confirm this happens when using this car on any track.