Bug Reports - Automobilista 2 (Read the Opening Post)

Nope, saw that marker, couldn't turn out. I genuinely tried everything I could think of.

 

Version: 1.2.1.2
Track and Layout Used: F1 Classic Gen 1 Championship first race
Cars: F1 Classic Gen 1
Bug: All AI run out of fuel and drop out of the race. Note that refueling is not allowed, and I cut the race in half (35 laps). After about 30 laps, AI starts to drop out of the race until nobody is left in the race.
Steps to reproduce: Start the F1 Classic Gen 1 championship season and try the first race.

 

Version: 1.2.1.2
Track and Layout Used: Daytona road course
Cars: multiclass (gte, gt3,gt4)
Bug: at the rolling start procedure before you gain control of the car there are multiple incidents of cars hitting each other, mostly from halfway the grid to the back of the grid in a full 27 car lobby.
Steps to reproduce: start a multiplayer race with gte,gt3,gt4 with a full grid

This is a clip of what happened:
https://m.twitch.tv/clip/Intelligen...ium=mobile_web_share&tt_content=clips_viewing

 

Track & Layout Used: any
Car Used: GTE (Corvette & BMW) EDIT: other cars seem to be affected aswell. there seems to be an issue with the general audio-mix! the rev limiter shouldnt be bound to "main volume"!)
Settings: V1.2.1.2, Main Volume activated
Report: Rev limiter is way too loud & noisy, doesnt work correctly half of the time, is bound to main volume (!)
Steps to reproduce: hit the revlimit on GTE cars
Example:

 

build: 1.2.1.2
Track and Layout Used: n/a
Cars: n/a
Applicable Settings: MP (p2p) Multiclass
Steps to reproduce: lobby screen shows damage on when in fact it is disabled in the session

 

Track & Layout Used: Hockenheim
Car Used:gt3/gte
Applicable Settings: Weather dry default - Online 9 ai and humans AI were above 90/90
Report player gets punted by AI and whilst in pit sinks into floor
Player Yellow car in the sky . After crashing into my rr bumper on startline during countdown {before start lights are off. he ended up stuck and the went into the sky as opposed to pit
Steps to Ai and player online race .

Just clearing vids. this was the ai I referenced and agree shocker, no more details than above and vid. second vid of : sky cars.

dumped gb's of vids to clear space will post more when applicable

 

XInput issues regarding circular thumb stick motion compensation, altering response curve and dead zone

Version: 1.2.1.2.1730

Report:
When using any xinput left/right thumb stick horizontal axis for steering, any input in the vertical axis (if it is mapped or not does not matter) of the thumb stick will:
- drastically alter the response curve of the corresponding horizontal axis
- drastically alter the set dead zone for the stick (could be side effect of response curve change)
- generally make it impossible to drive while y-axis input is applied because of completely different sensitivity

All inputs recognized as thumb sticks will have a hard coded dead zone and
a custom response curve, the dead zone set in the UI will be calculated
ON TOP of the hard coded ones
(custom curve could not be confirmed exactly as different controllers with same
menu steering sensitivity on 2 PCs resulted in different curves, one still had a relaxed non linear curve with 100 steering sensitivity)

This happens independent of selected controller profile/method in UI,
generic gamepad/steering wheel presets will still be affected as long as the input is detected as xinputs thumb stick.

This is a problem for any custom build wheel or gamepad remapped by steam
as xbox controller, especially if throttle and brake axis are mapped as
y-axis of the same stick.

Locally tested on 2 machines using a real xbox 360 controller and a
steam controller where the y-input was applied independently via remapping axis.

Steps to reproduce:
Use left/right thumb stick x-axis to steering and input y-axis on the same
thumb stick while steering using a xinput controller.

Proposed changes:
- only apply hard coded dead zones / custom response curves / circular motion
compensation if the selected controller in the UI is xbox one / 360 gamepad
and deactivate these features for custom gamepad/wheel profiles
- integrate an option to switch off any form of input preprocessing aside from the available UI settings.

EDIT:
After dusting of a old Saitek joystick that can reach full deflection for both X/Y-Axis, the input changes are not only limited ti XInput but possibly to all form of joysticks, disregarding if their calibration already compensates for this or type of stick used.

Here is a video with telemetry and an input helper to show what happens when the vertical joystick movement alters the steering deflection:

 

Version: 1.2.1.4
Track and Layout Used: adelaide 88 (although im pretty sure it doesnt matter
Cars: flcassic gen 1
Bug: these two cars have a traction control slider option in the setup menu lol
Steps to reproduce: hop in a gen 1, go to advanced setup

 

The recent update that went up today seems to have broken a lot in the simulator. That's a shame, because I was just getting back into it...

Version: 1.2.1.2.1735
Track & Layout Used: Montreal (Modern), Oulton Park, Curitiba Outer, likely others
Car Used: Super V8, Brazil Stock Car 2021 (Doesn't seem to matter)
Applicable Settings: Real world weather, test session, practice session in race weekend, 60x time acceleration (Doesn't seem to matter)
Report: Car loads fine, drive forward out of garage and sudden damage like there's an invisible wall. Car loads with damage afterwards, can't drive forwards.
Steps to reproduce: Drive any car with real world weather at certain tracks, try to drive out of pits.

Version: 1.2.1.2.1735
Track & Layout Used: Oulton Park, likely others
Car Used: Super V8 (Likely Others)
Applicable Settings: Real world weather, test session, practice session in race weekend, 60x time acceleration (Doesn't seem to matter)
Report: The weather shifted to raining, and the car suddenly accelerated when braking into a wall. Weird physics happened afterwards, including pit crew outside pits that didn't let me leave (Weird crash physics similar to above occurred)
Steps to reproduce: Drive any car with real world weather at certain tracks, try to drive out of pits.

 

Version: 1.2.1.2.1735
Track & Layout Used: Irrelevant
Car Used: Irrelevant
Applicable Settings: Real world weather, test session, practice session in race weekend, 60x time acceleration (Doesn't seem to matter)
Report: Sim loads randomly with no FFB. Only solution to get FFB back is to exit sim, reload sim.
Steps to reproduce: Drive for long enough, it will happen eventually.

 

UPDATE : DISREGARD. I SEE NOW THAT YOU ARE AWARDED EXTRA POINTS FOR POLE POSITION AND FASTEST LAP AND THAT LIKELY ACCOUNTED FOR THIS.

Version : 1.2.1.4.1735.AVX
Track :Curitiba 2.26 miles
Cars : GT3
Settings : Custom Championship, JCW UK 2020 Points system, race 1 is 5 mins, race 2 is7 mins, this was the 4th of 7 tracks/races in this custom championship.
Report : Both 1st & 2nd place received 50 points at the finish of the 2nd race.
Steps to reproduce : No idea, hopefully it doesn't reproduce.

 

Track & Layout Used: Spa 2020 (seems to happen in any track)
Car Used: P2 CLASS (any car)
Applicable Settings: Custom Race x20 time - Weather - any dry weather but with WET track selceted
Report: during the race the track is going to dry, but when I use the replay and close it the track is fully wet.
Steps to reproduce: Use dry weather with wet track option and race for about 5 laps, then use replay and close it.

 

Version : 1.2.1.4
Track : Any
Cars : Formula Vee
Report: Within the Setup option, there is an adjustable TC scale (dead slider?) which should not be there, as those cars did not have such driving aids.

 

Track & Layout Used: Any
Car Used: Formula Ultimate
Applicable Settings: Any
Report: Left mirror is angled incorrectly. Pointed extremely aggressively inwards
Steps to reproduce: Drive Formula ultimate on any track and observe left mirror. Latest patch notes said mirrors were fixed. I personally never had any issues before the update, now they are broken.

 

Version: (the newest version, existed randomly on previous versions)
Track & Layout Used: Any
Car Used: Any
Applicable Settings: Any
Report:

1. Time Trial, cannot download setups.
   
2. Setups, in turn, cannot be adjusted as values change to single digits that don't correspond with values being changed (ex. tire pressure is 24.0; clicking left or right to change turns value into completely different whole number such as 1, 2, 3, etc.)

Steps to reproduce: Unknown. Haven't found much searching for fixes, either.

 

v1.2.1.4
Track & Layout Used: Brands Hatch Indy
Car Used: Ginetta G40 Cup
Applicable Settings: Custom championship, 15min practice, 5 min quali, 2x 15min race, real historical weather, custom date (17.03.2019), real time progression (1x)
Report: weather changes very fast during every weekend session despite 1x time progression and real weather preset. Track visuals and grip also change very abruptly - when stronger rain starts it changes from a wide dry line to full wet track in a moment, not gradually.
Steps to reproduce: drive a race weekend in a custom championship with the above settings.

 

v1.2.1.4
Track & Layout Used: Interlagos
Car Used: BMW M4 GT4, Ginetta G55 Supercup, G40 Cup, possibly other
Applicable Settings: free practice, in-car (cockpit) camera
Report: when ICM is on-screen, the look left/right key bindings do not work.
Steps to reproduce: any car? open in-car management, try looking left or right

 

v1.2.1.4
Track & Layout Used: Silverstone International Historic 2001 & Jerez
Car Used: All Copa Truck
Applicable Settings: Any mode, any camera
Report: Rear is always touching the ground when accelerating and turning right/left. Increasing spring rate and/or bump stop to max do not mitigate the effect (and make the trucks bouncy).
Steps to reproduce:
Just drive any copa trucks on any low elevation track and manouver around corners

 

v1.2.1.4
Track & Layout Used: Silverstone International Historic 2001 & Jerez
Car Used: Copa truck
Applicable Settings: Any mode, any camera
Report: My wheel rotates full force and clockwise (like a spring effect only the left side) and stays in the position. Happened one time but nearly hurt myself.
Steps to reproduce:
- Launch the game on Steam
- Select a truck and a track
- Race a little bit on the track
- go back to the pitstop via the menu
- exit the race
- Alt-tab to another window (chrome for example)
- Go back to the game
- Select another truck on the track
- Start to drive
- Wheel rotates quickly clockwise to max rotation

I need to stop the game, reconnect my wheel and relaunch the game

Wheel is : Thrustmaster T150 (firmware is up to date)