Bug Reports - Automobilista 2 (Read the Opening Post)

it has to be fixed, it's like an emergency stop. If you look on oval races (NASCAR, IndyCar,...) when cars hitting the wall they are sliding metres / kilometres along the wall.

 

Track & Layout Used: Goiania and Brandshatch GP so far...
Car Used: Caterham 620R
Applicable Settings: Test day, all default settings and setup.
Report: The tyres just will not warm up, and the car understeers way too much. Even doing a steady/slow warm up lap, the car just veers off unrealistically.

When you push hard, it doesn't get much better. I've done 20+ laps and there's no change in temps from the below pics. You can see the rear left is 'Getting there' but even that isn't getting to full working temp.

You can also see a disparity between the Tyre/FFB HUD and the tyre 'colours' in the bottom right.

Steps to reproduce: Use the Caterham 620R, test day at said tracks, and try not to veer off at any corner. You can of course kick the rear out with some throttle/dipping the clutch etc, but the understeer is way over the top.

People keep saying how fun the 620R is, and it is my kinda car, but the understeer issue means I can't enjoy it.

 

Track & Layout Used: Brand Hatch
Car Used: ARCC
Applicable Settings: 5 laps, time progression x15, rollimg start, 29 cars, grid position last.
Report: car standing still when the race has a rolling start. When the lights turn green your car start his engine and then you can drive. AI is already 10 seconds ahead of you at that moment. This happens when you return to pit then skip till the end and restart the session[race]
Steps to reproduce: it happend with practice/qualification skipped but also happend when i turn the practice and quali off.
Video in link

 

Same thing happens sometimes in online races.

 

Guys, please take your highly subjective debate somewhere else... this is bug report thread, don't pollute it please.

 

Track & Layout Used: Any
Car Used: Any
Applicable Settings: Single player race, 15 ai (70 skill, 50 aggression), 5 laps, any weather, 10am start, no time acceleration
Report: Can't interact with ui on the post race results screen. Game does not respond to input from my wired Xbox 360 controller, mouse or keyboard. Game has not crashed as my car just endlessly laps the track on its own. Have to use task manager to shut down the game.
Steps to reproduce: Only happens at the end of a race but there is no pattern as to how many races I run before encountering the bug. When it does though the race has been setup as above and I'm using my wired 360 pad to control the car.

EDIT: After another few hours playing I've found this is only happening when I finish in last position. Not ever time but only when I'm last. Knocked the ai down to 60 so now I'm finishing mid pack and not had this issue occur at all. Hope this helps.
Was wrong about finish position causing this. Just won a 10 lap race at Spielberg and the bug happened again.

 

Superkart at Azure, single race with A.I. You can't do a single lap as you receive damage straight away. HUD shows front left brake temp at minus 22458349687569847

 

Not track-specific as reported so many times here. Usually brakes overheat--this one must shatter from the cold!

 

Track & Layout Used: Oulton park
Car Used: P3
Applicable Settings: Online race
Report: At the start of the race I have to escape and then return to the race quickly otherwise I miss the start, it has happened at a few online races that I have managed to join.
Steps to reproduce: Join an online race

 

It has been noted by many, myself included very frustrating esp after practice and quali then the race is stuffed.
It may well have been addressed for the latest update. we will find out (beta testing) today or this weekend.

 

I've experienced this a few times as well, not using a gamepad though.

 

Is this the same bug that changes the camera for the start of the race? For one online race I qualified 2nd and at the race start it changed to a trackside camera and took me 30s to work out how to get back into the cockpit as didn't have a camera change button mapped.

 

I thinks so. Same happened to me 4 out of 5 times last weekend online

 

Track & Layout Used: Donington National
Car Used: MCR 2000 (same class)
Applicable Settings: May be slightly worse at night (00:00)
Report: Cars slam in to one another the moments the lights go green. Seems to be caused by one car weaving left and right rapidly. Usually ends in with at least one car in the grass to the right of the straight.
Steps to reproduce: Drive this combination and wait for the carnage.

 

Track & Layout Used: Any track
Car Used: Stock Car V8 & Copa Uno (Any car realy, but tested with these as they have very different seating positions)
Applicable Settings: any
Report: Camera position doesn't save per car.
Steps to reproduce: Drive the stockcar. Adjust the view so you get a good view out of it. Change to the Fiat. You are now seated on the hood of the car. Back the camear up until you have a decent view out of the car. Switch to the stockcar. You are now so far back in the car that you can't race. Looks like it's 3 meters to the windscreen.
Tested using tripple-screens. Also I can't realy verify this, but the FOV feels different between the two cars.

 

Track & Layout Used: Any
Car Used: F Classic Gen 3
Applicable Settings: Rain
Report: It's barely impossible to get a good hairpin apex unless you almost stop de car. I have never raced in the rain, so I am not complaining about the physics here (in fact, it's soooo cool to drive in the rain in AMS2...). The thing is that this lack of grip doesn't seem to apply for the AI, because all the gap I build during one lap dissappears when they do the hairspins so much easily then me.
Steps to reproduce: Race with those cars under a heavy rain in any track with a hairspin (Canada, Brands Hatch...).

 

It seems to work now

 

Track & Layout Used: Interlagos
Car Used: FV10
Applicable Settings: Time Trial
Report: Engine blows after half a lap. Settings have Mechanical Failures set to "NO"
Steps to reproduce: Push the car hard and it fails on exactly the same bend every time.