Bug Reports - Automobilista 2 (Read the Opening Post)

Version: 1.4.5.2
Track & Layout Used: Any track
Car Used: All cars with onboard TC
Applicable Settings: setup stock
Report: Onboard TC doesn’t function. Tried mapping with button box, or Fanatec Mclaren V2 rotary encoders, with no result.

 

Version: 1.4.5.2
Track & Layout Used: Cascais 1988 - default layout
Car Used: All
Applicable Settings: Default, I drive in VR (probably doesn't matter but I mentioned it just to be sure)
Report: The 3d player models on the side of the road don't have HEADS until you drive close to them (around 100 / 200 meters). When you're far away, they are just a half body
Steps to reproduce: Driving on it. I saw it instantly on the first lap, you couldn't miss it especially not in VR. It's really distracting.

 

Make sure you don’t have aids set to off in game settings

 

This has probable already been covered.
In multiplayer when its my lobby after qually there is a CONTINUE button which sometimes takes upto 10 attemps to work

In setups you change something, go out and drive and on return to setup that setting is back to what it was

 

I don't know if you are referring to the same thing on the second part of your post, but I have experienced online that the setup changes sometimes are not loaded, even if you save a setup with the very exact settings you want, then load it. This can be specially seen on tyre pressure settings, but more alarmingly, fuel load. This is 100% unacceptable.

 

Just noticed that some of my earlier problems with changing wheel look to be connected with changing controller preset. When I was on my preset for my F1 wheel, I could assign buttons. When I switched to my GT3 wheel preset I couldn’t

 

Track & Layout Used: Spielberg Historic 1974
Car Used: Brabham BT44
Applicable Settings: Multiplayer race on a dedicated server
Report: Different result shown on screen and what the dedicated server registered in the results file, also Simhub overlay shows the same result as the dedicated server, but that result is wrong, in my example the result shown ingame is the correct result, only P6 did actually finish the race, so the DNF shouldn't be there.
Steps to reproduce: Not sure.

Result from the dedi shown on JustRace:



I uploaded the results file to simresults as well, to make sure it wasnt related to JustRace:
Result 230217-7Eu - Spielberg_Vintage - RPM.JustRace.net | Brabham fun @ Spielberg #JR - Automobilista 2 - Simresults

The result as shown on screen (correct result) and you can also see what simhub registered in its overlay:

 

Version: Current(1.4.5.2)
Car Used: All
Track Used: All
Applicable Setting: VR and a weather choice with some clouds in it.

Report: The clouds that are very near to you or above you "rotate together with moving your head" So if a cloud is (almost) above/very near to you, then it rotates 360 degrees with the VR/where you lok. Immersion breaking bug.

Steps to reproduce: Use VR and use cloudy weather.

 

Version: 1.4.5.2
Car Used: Mercedes AMG 190E Evo2
Track Used: several
Applicable Setting: Online, before the race start

Report: Car setup never loads the correct tyre pressures. You can save and reload it as many times as you want, pressures always stay at defaults (1.72 bar front, 1.66 bar rear). Telemetry HUD validates that those are the values in the car when you are thrown in the grid before the start. It does not happen in practice, it does not happen in qualy. Only race. If you stay on the same setup through all sessions, it still sets them to the default values before the start of the race.

Steps to reproduce: join an online session with the Mercedes Group A, use different tyre pressures from the default ones, and pay attention to them in the garage when going into the race.

 

Sad that still so many track cams at so many tracks have this issue:
Here: Spielberg Historic 1976
But this is just an example, there are many more...
View attachment 24993

 

nice grass though. plus if you chose different season foliage those yellow wildflowers would be different.

 

Hi everyone, any idea on the attached bugsplat report? I need serious help, I've reinstalled win 11, reinstalled everything, no overclocking for the cpu and gpu but mothing the game keeps on crashing on menu pause, alt tab, and race start.
System specs
I913900k
Asus rog Maximus Z790 hero
MSI RTX 4090 gaming x trio
32 GB G skill 6400Mhz
Samsung 980 1 TB and 970 1 TB
triple 32 inches 1440p monitors
PSU 1200w
NZXT 350 cooler kraken x73

 

Version: 1.4.5.2
Car Used: n/a
Track Used: Azure circuit (Monaco)
Applicable Setting: Real Weather, test day

Report: No Real weather avaliable between 18th May 2021 and 1 june 2021

Steps to reproduce:

 

Version: 1.4.5.2
Car Used: n/a (drove caddy dpi)
Track Used: Silverstone GP
Applicable Setting: Night, MP race, winter weather

Report: Weird shadow glitches on specific outside exit kerbs at club (X2) and copse corners

Steps to reproduce: drive silverstone at night


(im not sure how it looks in still photos, but whilst driving it is super odd, but i mean this section of the kerb

 

Version: 1.4.5.2
Track & Layout Used: Daytona 24h layout
Car Used: DPi
Applicable Settings: 110 ai difficulty, low aggression. Fuel usage 3x and tire usage 4x, 45 min race with 30x speed to simulate 24hr race
Report: The dpi cars pit almost right away. I thought it was just because their setup was bad and didn't give enough fuel, but then they kept pitting over and over again. In 45 minutes I did 4 pitstops ( all for fuel 2x for tires ) and the ai did 7 pitstops. Sorry for weird resolution picture it was VR screenshot

This was really disappointing. It means it's impossible to simulate a fun 24 hour race that has pitstops. I thought the entire point of having Daytona and the dpi was because that's what they run for the 24 hour. So if you want to run this track and car you are forced to never have pitstops

 

Version: 1.4.5.2
Track & Layout Used: Watkins Glen Short (probably any)
Car Used: F-USA Gen 1 (probably any)
Applicable Settings: time duration for race
Report: mSessionDuration and mEventTimeRemaining are 0 in shared memory when viewing a saved reply. If the race duration is number of laps then mLapsInEvent is the correct number in shared memory when viewing a saved replay.
If I view the replay at the end of an offline event, mSessionDuration and mEventTimeRemaining are correct in shared memory. However if I save the replay, exit the event then view the saved replay, mSessionDuration and mEventTimeRemaining are 0.

 

Version: 1.4.5.2
Track & Layout Used: Any track
Car Used: Brazil Stock Cars 2021
Applicable Settings: In VR and when using a custom livery Brazil Stock Cars 2021 - Nascar 2022 Season Liveries
Report: When using a custom livery for the Brazil Stock Cars 2021 and specifically when playing in VR, the glass on the side-mirrors of every OTHER car that is not driven by the player is covered with the custom livery too. Non-VR it is good, so it is a VR graphical bug.

 

Version: 1.4.5.2
Track and Layout: Spielberg GP (not relevant IMO)
Car: Formula Ultimate 2019
Report: replay shows 8th gear in display as -8. While driving, it's fine. Pics attached to compare. I was on VR as you can see.

 

Version: 1.4.5.2 and current beta
Track and Layout: Spa 73
Car: Mitsubishi Lancer RS

In Test Day, when startiing the session, it is impossible to exit the stands as the crew block it, thinking there is a pit stop or something. Only happens with the Lancer RS and only on that track.

 

Next week we have March and the bug is still not fixed.