Bug Reports - Automobilista 2 (Read the Opening Post)

Thanks for the reply. The rotary encoder registers, when I assign TC control, but doesn’t function in game (in game is what I meant for onboard) for some reason. I have two rotary encoders on my Fanatec Mclaren GT3 V2, & the assignment for ABS works fine, in game. I’ve tried everything, & can’t figure it out, maybe it’s my issue. Fair point about the resources, I fully understand that Reiza is a small developer.

 

Version: 1.4.6.4
Track & Layout Used: Any
Car Used: Brabham BT64B
Applicable Settings: Any
Report: Many of the car gauges do not move or change.

FYI @robillard3381

 

Version: 1.4.6.4
Track & Layout Used: Any
Car/Class: Group C
Applicable Settings: Any

Report: The Chevy in the group c class has a different pit process compared to the other cars in the group c class, with the Nissan, Mercedes and Porsche you are able to add fuel and change tires at the same time, however with the chevy it adds fuel and then changes the tires. a tire change takes roughly 12 seconds so the chevy has a pitstop which is 12 seconds longer than the other cars in the group c class.

I'm guessing that the chevy was supposed to be part of another car class but for whatever reason it was moved to group c but the pitstop stages were not changed to reflect it

 

M

Make sure you don’t have TC and ABS turned off in game settings

 

This problem was really bad in a session today, multiple times a lap around Bathurst 83 in a Merc Group A... Even effected the paddles so it blew my engine by changing down for me whilst I was using my H-pattern...

Decided to take to AC and see if any issue cropped up, I have a very similar button layout for both... Nothing happened in around 30 mins of running...

So whilst it does sound like it's a dying wheel, it's not effecting any other titles...

I'm going to try running a different rim for a week and see if it happens on that... I had a great session last night for 3 hours without issues in AMS2... But today it was terrible...

 

Version: 1.4.6.4
Track & Layout Used: Spielberg
Car/Class: GT3 ( mclaren )
Applicable Settings: MP ranked \ VR

Report: Finished race second and being prompted 3rd at the end splash screen ( see both screenshot ). Have noted during qualification and race that after the last corner the differential lap time in the hud start increasing like the car was stopped or going reverse ( dunno if related but wierd)

Screenshot at finish line from 3rd player


race result. also gap time are reported incorrectly on this board

 

Had the same thing happen to me a few weeks ago, where roughly 1 sec got added to my finish time and I lost a place due to it. I was host of the session, so thats even weirder I guess?

Version: 1.4.6.1
Track & Layout Used: Donington National
Car/Class: Ginetta G55 Supercup
Applicable Settings: MP unranked \ server host

 

Track & Layout Used: Daytona Road Course
Car Used: Formula Intern
Applicable Settings: Standing Start
Report: When performing standing start on Daytona cars drop down, i'm personaly can stand still with clutch but cars drop down the road (to the left) and then start racing
Steps to reproduce: Forumla Intern standing start on Daytona.

 

It's been over a week of solid racing without an issue...

Which leads me to believe there's an issue with either the Ferrari advanced wheel I have, unlikely as it doesn't have issues in other titles... Or that the profile for the Ferrari advanced wheel is causing the issues, as I've had to switch to the TC-PC Racer profile with the other rim...

 

Version: 1.4.6.4
Track & Layout Used: Fontana and Indy
Car/Class: Lola F-USA Gen 1 both engines
Applicable Settings: needs 6-6 wing to turn
Report: The Lola is over a second slower at Fontana compared to the Reynard and feels broken now in comparison to how it was in December...

There's just so much push that you have to run far to much wing now...

The league event that I'm in has had to allow all it's Lola runners in the Reynard for Fontana because it's a 2 class race...

It's so much different to how it was in December when I could run 2-6 wing and turn the corners, now I can barely make it with 6-6... I know the Reynard is meant to have more front wing so it can run 0-6 but the current Lola is just broken on the speedways having to run so much drag just to turn...

 

Track & Layout Used: Monza (newest)
Car Used: Formula V10 Gen 2
Applicable Settings: high quality mirrors is enabled.
Report: Mirrors appears to be low quality despite the high-quality setting being enabled.
Steps to reproduce: pause the game while driving, look at the mirror quality.

 

Version: 1.4.7.0
Track & Layout Used: Nordschliefe '71
Car/Class: McLaren M23
Report: Freeze during replay (happened about 30% into the replay) after one full lap. There was still the sound playing back but the video froze. When I exited, the game crashed to desktop.

 

When the replay froze, I was able to to back 'live', but the car was now stuck where the replay froze. Exited to main menu but game froze on the game logo.

 

1.4.7.0 Release Candidate

I chose the new R. Barrichello paint scheme in 2023 Stock Cars (Toyotas), but in the race I had the dark blue Mobil paint of E. Barrichello, so perhaps a naming issue in files?

 

1.4.7.0 RC
No spectators and almost no trackside objects on MODERN Nordschleife (Singleplayer Quickrace)…

 

Version: 1.4.7.0 RC
Track: Südschleife '71
Car: C3R
Issue: Replays crash the game when the car crosses the back straight junction between the Nords-Süd. Occasionally requires a full sign out, but sometimes responds to task manager killing the app.

All mods I had were fully uninstalled prior to the RC.

 

Yup, there is definitely something wrong with replays around the Sud/Nord junction. Doesn't seem to matter what type of session/car in use.

There is the same issue when turning right onto the last bend when doing just the Sud track too.

 

Solved! set steer sesitivity to 50. all good.

 

Came to report the same, around the bottom half of Corolla 2023 options, all descriptions are mismatched with the actual skins.

 

Follow up on this: on the current RC (1.4.7.0) this does not happen anymore! Wet tyres are now actually useful.