Bug Reports - Automobilista 2 (Read the Opening Post)

Track & Layout Used: VIR full
Car Used: Formula Reiza
Applicable Settings: Weather - Clear
Report: AI crash invisible walls at exit of T16
Onboard camera with AI below

 

Track & Layout Used: VIR
Car Used: Formula V10
Applicable Settings: Weather - Clear
Report: AI cars are shaking, vibrating.
Steps to reproduce: Drive the Formula Reiza in a Clear session, get behind AI car you will easy see the AI car shaking, vibrating .

 

Track & Layout Used:
Car Used: Formula 3/301
Applicable Settings:
Report: Front Spring rate set to 0 and isn't adjustable
Front Bump stop set to 0 and is adjustable only to 1
Steps to reproduce:

 

Track & Layout Used:
Car Used: Formula VEE Fin
Applicable Settings:
Report: Missing information about car
Steps to reproduce:

 

Track & Layout Used Donington
Car Used: AJR Chevy V8
Applicable Settings:Weather - Clear
Report: Pit banner says 60 KPH limit but the car auto limiter sets it at 80 kph
Steps to reproduce:

 

Track & Layout Used Adelaide 1988
Car Used: Any
Applicable Settings:Any
Report: No loading screen track picture background (just white)
Steps to reproduce: Load Adelaide 1988

 

Track & Layout Used Kyalami 1977
Car used: Super Cart
Applicable Settings:Any
Report Pit Crew ?
Steps to reproduce: Load as above

 

Track & Layout Used Any
Car Used: Any
Applicable Settings:Any
Report: Sprint race car has poping sounds
Steps to reproduce: Load session start racing.

 

Track & Layout Used : Imola 2018
Car Used: P3 MRX Duratec Turbo also happens with other cars
Applicable Settings:Any
Report: I overtake 2 AI cars in the corner, I am ahead of the AI when exiting corner, I go wide and I get the message I need to give the 2 places back, I need to "return to race position 12".
Even if you go very little wide only touching the grass same thing happens.
Steps to reproduce: Load session start racing overtake AI cars in T7(Tosa)

 

Track & Layout Used: All Imola tracks, All Interlagos tracks, All Spielberg tracks
Car Used: Formula Ultimate
Applicable Settings: Weather - Clear
Report: AI cars are shaking, vibrating.
Steps to reproduce: Drive the Formula Ultimate in a Clear session, get behind AI at about 2 car lenghts will easy see the AI car in front is shaking, vibrating on the straights. If you go further away from the AI in front the AI car will stop shaking.

 

Track & Layout Used: Imola 1972
Car Used: Formula Ultimate
Applicable Settings: Weather - Clear
Report: My car is shaking, vibrating while in pitbox in neutral
Steps to reproduce: Drive the Formula Ultimate stay in pitbox in neutral.

 

Track & Layout Used Snetterton 300
Car Used: P3 MRX Duratec Turbo also happens with other cars
Applicable Settings:Weather - Clear
Report: Pit banner says 60 KPH limit but the car auto limiter sets it at 80 kph
Steps to reproduce:

 

Track & Layout Used: any
Car Used: Formula Classic Gen 2 Model 1
Formula Classic Gen 2 Model 2
Formula Classic Gen 2 Model 3
Applicable Settings: any
Report: Driver's body is coming through the car floor

 

Just wanted to confirm this and add a screen. Really looks funny in a bad way

 

Track & Layout Used: Kya
Car Used: Any
Applicable Settings: VR - any
Report: Floor in front of the first pit box when going into the pits does not exist, cars fall through a hole in the graphics.
Steps to reproduce: Do a lap at Kyalami with any car and go back to the pits, turn left towards the first garage as soon as the wall on the left finishs.

 

Track & Layout Used: Londrina, Kyalami
Car Used: Caterham, GT5
Applicable Settings: Single Player
Report: Getting CTD after a single player. First time it forced the PC on a power reboot. Second time I had to power it off. Note: On top of all that, I just noticed the game was uninstalled from Steam. The files are still on the SteamApp folder. I am not sure what is going on here.
Steps to reproduce: Single Player 3 laps or 5 min. 15 cars.

 

This problem still exists in latest beta. It is possible to assign the Seq.shifter in the configuration, but on track it doesn't work. Instead the shifter paddles are still active.
Seems like the Fanatec profile ignores the customized button mapping and still uses the default, while on track.

The only workaround is to use a Custom profile.

 

since the last update i cant use manual gearbox on my logitech G920 can only get first and second gears and it wont let me configure it in the settings. it was working fine until last update

 

custom profile dont work.

 

Track & Layout Used: Any
Car Used: Any
Applicable Settings: Use assists on "authentic"
Report: Assists seem to enable by themselves, ignoring the level of assists used. If I switch the braking or steering assist, it gets fixed and the game uses the correct level. Most noticeable with low downforce cars, like F-Vee and F-Vintage.
Steps to reproduce: Launch any car on any track with "authentic" assists on, do a couple of laps and then switch any of the sliders. Then get back to the desired difficulty and compare the driving experience.