Bug Reports - Automobilista 2 (Read the Opening Post)

Version: 1.6.9.8
Track & Layout Used: Any
Car Used: Any
Applicable Settings: Any
Steps to reproduce: Create a MP Lobby with settings to no setup limit
Report: The moment you open the lobby so other can join the limit setup jumps to Standard Setups only.

Version: 1.6.9.8
Track & Layout Used: Any
Car Used: Any without TCS / ABS
Applicable Settings: Any
Steps to reproduce: Create a MP Lobby with allowed TCS or ABS
Report: This is a very old bug still happening. If the lobby allows custom TCS / ABS it will auto activate that after joining the session even if you set your own settings to Authentic. You have to go to the settings after joining and change your aid settings around and back to authentic to actually be authentic

 

Version:1.6.9.8
Track & Layout Used:imola
Car Used:gt3 gt4 gte
Applicable Settings:n/a
Steps to reproduce:n/a
Report:On this track, spin accidents still occur frequently, even when the AI mistake setting is turned off.

 

First of all, the update is incredible. Congratulations!!! Thank you for the Renaults. I bought a DLC to compensate for the loss of income from what would have been a Renault DLC; it's not much, but it's from the heart.
Version: 1.6.9.8
Track and layout used: Azure and Long Beach, but it seems to happen on any track.
Car used: GTE Porsche and Corvette
Applicable settings: onboard camera view
Steps to play: Time Trial
Report: Extremely low engine sound (Porsche and Corvette), the other GTE cars are normal (Aston Martin and BMW M8).

 

Version: 1.6.9.8
Track & Layout Used: Le Mans (Circuit de la Sarthe)
Car Used: Aston Martin Vantage GT3 (but it's probably the same for all cars, I tried with a LMDH as well)
Applicable Settings: Time Trial
Steps to reproduce: Do a TT with a pre-1.6.9.8 ghost with any car at Le Mans (by the way, we should be able to see the build version for any TT time).
Report: The start/finish line has changed with the 1.6.9.8 update. Not sure if it's really bug but the S1 is now longer while S3 is shorter because the line is now at the tower with the 3 French flags while it was a couple meters before the Rolex arch before.

 

Version: 1.6.9.8
Track & Layout Used: Any
Car Used: Any with the new Formula tires
Applicable Settings:Parallax Occlusion Setting to High (haven't tested other settings)
Steps to reproduce: Just go into the cockpit
Report: The parallex occlusion part of the tires have some weird reflection of the environment
(Screenshot function didn't work somehow, so sorry for having to take a photo here)

It looks even weirder in motion with the Michelin sticker being reflected

Update: I think this strange reflection is only happening on the not-main monitor.

 

Version: 1.6.9.8
Track & Layout Used: Not track specific (see examples)
Car Used: Not vehicle specific (see examples)
Applicable Settings: Creating hosted lobby with editable setups - Rules & Penalties -> Limited Setup.
Steps to reproduce: Please see attachments, one example with Limited Setup "Off", another with Limited Setup "Force Default Setups"
Report: It appears that the Limited Setup option in Rules and Penalties is behaving diametrically opposed to intended. Off = Fixed Default Setups, Force Default Setups = Editable Setups

 

Version: 1.6.9.8
Track & Layout Used: Not track specific
Car Used: Renault R28
Applicable Settings: Any mode
Steps to reproduce: Try to engage traction control
Report: You have the option to enable traction control in the setup menu, but this car doesn't have it...

 

Version: 1.6.9.8
Track & Layout Used: Spielberg Historic 2001
Car Used: F-V8 Gen1 (M) but seems not to be car specific
Applicable Settings: Exceed Speedlimit during rolling start
Steps to reproduce: Start in the first position, exceed the speedlimit (once)
Report: Disqualified before T3 in the first round, not able to do the drive-through penalty

 

That’s exactly what I meant. It’s a mistake that it’s available in the menu.

 

Version: 1.6.9.8
Track & Layout Used: Probably any, tested on Le Mans 2005
Car Used: Audi R8 LMP1, part of the LMP1 2005 class
Steps to reproduce: Do a race in VR with vehicle detail Low and observe the car from its right hand side
Report:
When viewed in VR the livery for the right hand side of this car is merely a mirror image of the left side. Other cars in the 2005 endurance classes seem fine. This car is also fine when vehicle detail is medium.

 

Version: 1.6.9.8
Track & Layout Used: Any
Car Used: Formula Hybrid Gen 3
Applicable Settings: Any
Steps to reproduce: /
Report: Tires do not visually wear, they always stay shiny. Also, it's always using low downforce upper rear wings on all variants, creating an obvious model mismatch.

 

Version: 1.6.9.8
Track & Layout Used: All
Car Used: All
Applicable Settings: Championship
Steps to reproduce: See report
Report:
Since the last update, I've noticed that in championships, even after changing the weather progression settings, when I enter the session and check the information, it appears as disabled and the weather transition doesn't occur. This is an error I haven't seen in single races.

 

Version: 1.6.9.8
Track & Layout Used: Any
Car Used: Maserati GT1
Applicable Settings: Chase camera
Steps to reproduce: Drive the car in the chase camera
Report: Maserati GT1 upshift sounds are glitching when driving on a chase camera view

 

Version: 1.6.9.8
Track & Layout Used: Any though has happened almost every time loading Hungary (3-4 specific times, usually if I race it, leave go to another track and then attempt another race there)
Car Used: Any
Applicable Settings: Any
Steps to reproduce: Using Linux with proton 10 / cachyos proton runtime
Report: Been having a lot of strange behavior with the update. It seems files (texture files apparently) are getting deleted randomly and cause the game to crash (A CRC error stating that the game can't load a specific texture, seen it as a Mercedes or a crowd texture ). I can fix it by verifying file integrity on steam but seems to be happening after 1 or 2 rounds of play throughs

 

Version: 1.6.9.8
Track & Layout Used: Indianapolis 2001 RC maybe not track specific
Car Used: Stock Car Brazil 2024 maybe not car specific
Applicable Settings: Any
Steps to reproduce: Create a Single Race -> i changed the Session Settings, Practice: disabled, Qualifiying: 15min, light cloudy -> now i want them to reset back to defaults -> SESSION SETTINGS -> "Reset To Defaults" the game crashes to desktop.

 

Version: 1.6.9.8
Track & Layout Used: Laguna Seca
Car Used: N/A
Applicable Settings: Exceed Speedlimit during rolling start
Steps to reproduce: Start in the first position, exceed the speedlimit (once)
Report:
I had a similar thing on Laguna Seca yesterday, so this bug might not be track related. I got a DT at race start but a few corners in I got DQ before I even had the chance to serve the DT

 

Version:1.6.9.8
Track & Layout Used:all
Car Used: f1 v8 gen 1 B/M
Applicable Settings:n/a
Steps to reproduce:n/a
Report: Please lowering the Helmet Position on Car Model, give better visual of f1 2006

 

Version 1.6.9.8
Track & Layout Used: any oval
Car Used: formula usa gen 1 formula usa gen 2 formula usa gen 3
Applicable Settings:mechanical failures on any rate
Steps to reproduce:race an oval with formula usa gen 1 2 or 3 failures on
Report: after 5-6 laps cars dnf mechnical failure engines smoken at same rate no matter what failure rate is. i assume its set up and radiators closed over heating as the x rate has no affect on it.
Also fuel management is terrible for them as well but end of stint 1 down to single figure cars runnin g lap 13-18 even with times 1 failure rate.

 

3 Minor bugs:

Version 1.6.9.8
Track & Layout Used: any
Car Used: any
Applicable Settings:none
Steps to reproduce: Put fuel more than 100L
Report: By putting more than 100L of fuel in the car with 10L estimates or more, the first 1 is obscured in the new big Speedometer.

Version 1.6.9.8
Track & Layout Used: Montreal modern
Car Used: any
Applicable Settings:none
Steps to reproduce: Pitstop
Report: Pitcrew appears in the wall next to the main straight when pitting.

Version 1.6.9.8
Track & Layout Used: Barcelona modern
Car Used: any
Applicable Settings:none
Steps to reproduce: Use the instant replay function when a double yellow flag is active and in your sector.
Report: By using instant replay when you're in a double yellow sector, the double yellow will remain permanently in that sector, its visible in the HUD and in the flags on the circuit. But I suspect its not being considered by the AI.