Bug Reports - Automobilista 2 (Read the Opening Post)

Version: V1.6.9.95
Track & Layout Used: Long Beach
Car Used: F-USA Gen 1
Applicable Settings:
Report: The same old bug - when in championship mode, after Rio Oval race - next race Long Beach. Cars have oval \ speedway configuration (on the street course)!

 

Version: V1.6.9.95
Track & Layout Used: Any
Car Used: McLaren M23
Applicable Settings: N/A
Report: its been more than a year with a front tire collider issue on Mclaren, or what is it. on many tracks i drove, same issue , some times even more visible. It's my fav Open wheeler, dear team, please fix it somehow ))

 

Version: V1.6.9.95
Track & Layout Used: SCB '20, '21, '22 series
Car Used: Toyota silhouettes
Applicable Settings: N/A
Report: no interior rendered and empty looking from outside

 

Track/Layout used: Any (e.g., Race 1 at Laguna Seca, Race 2 at Daytona)
Car used: F Classic Gen 4
Configuration: Any
Report: The downforce setting does not update according to the circuit type.
Steps to reproduce: Create a custom championship featuring circuits that require different setup types.

Since the last update, the car setup (Standard, Low Downforce, or High Downforce, depending on the circuit) fails to load correctly in custom championship sessions.
The issue is that the downforce setting remains locked to the type required for the championship's opening circuit. For example, if the championship starts at Laguna Seca, the "High Downforce" configuration loads for all subsequent races—even at tracks where it isn't the correct setup—and cannot be changed. I am experiencing this with the F Classic Gen 4; I haven't tested it with other car types.

 

Version: V1.6.9.95
Track & Layout Used: Any
Car Used: Any
Applicable Settings: Enable MP AI & Save a Replay
Report: In saved replays the MP AI is shorted wrongly now, only showing the first letter of the firstname and an AI Tag but no surname at all

 

Version: V1.6.9.95
Track & Layout Used: Kyalami modern
Car Used: any
Applicable Settings: N/A
Report: sessions are not being simulated when skipped, no times set.

 

Version: V1.6.9.95
Track & Layout Used: Interlagos
Car Used: F1 V10 Gen 3 Model 1 and 1 B
Applicable Settings: Excessive camber
Report:
Hi,

Has anyone else noticed we still have some of the AI open wheel cars with what seems like very high camber so much so that the wheels are off the ground?

Examples can be found in the Formula V10 Gen 3 Model 1 (M) and Model 1 (B)

I race in VR so not sure if this is just a VR thing and I am using a skin pack but it was also happening on some of the Indycars. It’s not new for this release as it was happening prior to that.

I’m not sure it happens every time but I’ve tried 5 or 6 times going back to the main menu and one time it looked OK, but all the rest the issue was there.

I’m testing at the current version of Interlagos, I’m not sure what's causing the issue but I think a few other people had spotted it previously as well.

I’m using one of Lady Crousette's excellent skin packs Checking your browser

Added screenshot

 

Version: V1.6.9.95
Track & Layout Used: N/A
Car Used: Any
Applicable Settings: Custom Championship
Report: Time progression returns back to OFF
Steps to reproduce:

- Set up a custom championship
- Configure any session (Prac/Qual/Race) with Time Progression 'OFF'.
- Click Save the configuration window closes
- Go back into the configuration screen Time Progression is 'Real Time' not 'OFF'

 

Track & Layout Used: Spielberg Historic 2001
Car Used: Lamborghini Murcielago GT1 2005
Applicable Settings: Month: March
Report: Corrupt and missing track side textures around the track. It seems it is because of the winter theme. Other drivers on the server had the same issue.
Steps to reproduce: Drive a car at Spielberg 2001 in winter (e.g. early march)

 

Version: V1.6.9.95
Track & Layout Used:Jacarepagua (Historic Oval 2005)
Car Used: F-USA Gen1
Applicable Settings: Race set in March - May.
Report: Too much cars retire (some 20 of 27 in 20 minutes race), wrong setup for AI? Also in turn 3 AI slow down too much, it's flat-out turn in this trapezoid "roval".

 

Not sure whether to report that here or in the User Livery Overrides thread but I think that's a bug. Feel free to move if this is out of place here.

Version: V1.6.9.96
Track & Layout Used: Any
Car Used: Panoz Esperante GTR-1
Applicable Settings: Use a custom livery on the Panoz Esperante and start any session.
Report: When using a custom livery on the Panoz Esperante GTR-1, the driver becomes invisible. Hope you can see in the screenshot. Same for view from the outside and also onboard, no arms visible in the cockpit perspective.

 

Version: V1.6.9.95
Track & Layout Used: N/A
Car Used: N/A
Applicable Settings: Cusom Championship
Report: This empty Windows appears when you create a Championship with a date that is in the future. Maybe this appears because i use Real Weather in the settings.

 

Track & Layout Used: Nordschleife 2025 (seems to happen in any track)
Car Used: GT3
Applicable Settings: normal (other settings seems irrelevant)
Report: I recently failed to qualify on the Nordschleife, so I watched someone else. I also had to start from the back, and this car wasn't visible in my rearview mirror until I briefly glanced back (using the rearview mirror button).
Steps to reproduce: in MP look at someone in Quali and in Race overtake him see noone is in mirror to see.

Here's a video of me watching him in qualifying:

Here's a video of me overtaking him:

 

Version: V1.6.9.96
Track & Layout Used: Any (Santa Cruz do Sul)
Car Used: Any (DPI)
Applicable Settings: Any (private training)
Report: wet / damp parts of track have rough edges
Nothing new, it's since a long time that way, but can't remember when it started. In earlier times edges were smooth.
see screenshots

 

Version: V1.6.9.96.3436
Track & Layout Used: Any
Car Used: Audi V8 quattro DTM and Camaro GT4.R
Applicable Settings: Any
Report: The WHEEL BLUR override isn't working; the Audi keeps showing the gold pattern, while the Camaro shows only the silver pattern.