Bug Reports - Automobilista 2 (Read the Opening Post)

Track & Layout Used: Any track
Car Used: Ginetta G55
Applicable Settings: Cockpit Wheel/Driver -> OFF
Report: When the wheel is set to be hidden, the wheel for the Ginetta does not go away, and instead stays in place.
Steps to reproduce: Disable the cockpit wheel/driver and drive the Ginetta on any track with any settings, and the wheel is still present instead of being hidden like it should.

 

Game Version: 1.0.6
Track & Layout Used: Any (tested in Cascais, Brasilia and Cascavel)
Car Used: Metalmoro AJR Judd
Applicable Settings: Any
Report: The Metalmoro AJR Judd does not have the DRS animation, otherwise, the other AJR engines models are ok

Spoiler: Screens

Metalmoro AJR Judd DRS OFF


Metalmoro AJR Judd DRS ON


Metalmoro AJR Chevy DRS OFF


Metalmoro AJR Chevy DRS ON

 

Game Version: 1.0.6.6
Track & Layout Used: Any
Car Used: Class_GT3 BMW M6 GT3
Applicable Settings: Drive onboard GT3 BMW M6 GT3
Report:Tire sounds when going over the kerbs and when slipping is to low compared to engine sounds. I need to lower "player engine volume" and "General car volume" to more than half, around 30, to be able to hear the souds tires are making

 

Game Version: 1.0.6.6
Track & Layout Used: Any
Car Used: Class_GT3 BMW M6 GT3
Applicable Settings: Drive in any other GT3 car and get side to side with the BMW M6 GT3
Report : Sound of the BMW GT3 is to high when going side by side with in any other car, the BMW GT3 cover all the sounds the your car is making.

 

Game Version: 1.0.6.6
Track & Layout Used: Any
Car Used: Class_GT3 Porsche 911 GT3; Class_Carrera Cup both cars
Applicable Settings: Drive onboard
Report:Tire sounds when going over the kerbs and when slipping is to low compared to engine sounds. I need to lower "player engine volume" and "General car volume" to more than half, around 30, to be able to hear the souds tires are making.
In the Carrera class cars the tire sounds are even lower than in the GT3 cars!

 

Game version: v1.0.6.6
Track & Layout Used: Nords 24H 2020
Car Used: BMW GT3
Applicable Settings: Multiplayer random lobby
Report: Internal mirrors not working
Steps to reproduce: MP lobby at Nords


PS: also something else reported ages ago concerning Triples. The vertical alignment by default is not correct in game, tried to align the lateral screens but it is difficult to find the right level.. I gave up and understood I have to live with a permanent vertical misalignment present only in AMS2

 

Game Version: 1.0.6.6
Track & Layout Used: Any
Car Used: Class_GT3: BMW M6 GT3, Mercedes AMG GT3
Applicable Settings: Drive online race
Report : Opponent BMW M6 GT3 and Mercedes AMG GT3 cars are shaking.

 

Game Version: 1.0.6.6
Track & Layout Used: Any (only been tested in online sessions)
Car Used: Any
Applicable Settings: Weather - Any
Report: Pit menu crashes game occasionally when changing pit preset values or exiting back to setup menu.
Steps to reproduce: Open an MP session and proceed to navigate to the pit preset menu. Begin changing values and setting up a stop. Exit back to the setup menu.

 

Game Version: 1.0.6.6
Track & Layout Used: Any (only been tested in online session)
Car Used: Formula v10 g1
Applicable Settings: Weather - Any
Report: The leading car experiences slipstream just like the following car. On an empty track, the Gen1 topped out at 323kph. When the same car with the same setup followed down the same straight the leading car gained 8kph and the following car gained 9kph. Slipstream also works when you are alongside another car. When both cars drove side by side they both gained 8kph in top speed.
Steps to reproduce: Take a car down a straight with plenty of headroom in the top gear so your top speed is not limited. Record the speed with nobody on track. Now have an identical car follow you down the straight and record that speed.

 

Game version 1.0.6.6
Track & Layout Used: All
Car Used: All
Applicable Settings: All
Report: I have the latest version of AMS2 but i'm still having the OLD camera configuration menu with world movement stuck at zero and cannot be changed. Just one time i had the new menu but it turned back to the old after restart. Very annoying as i need to change the world movement setting to have a pleasant racing setting.
Steps to reproduce: It's here permanently for me

 

Have you tried editing your shortcut link to include no_vr? I had this problem a couple months ago. It is in steam launch options. This forces the game to launch in non vr mode and lets you adjust world movement slider.

Sorry if this is wrong place, mods.

 

Thank you so much it solved my problem.

 

Game version: 1.0.6.0
Track & Layout Used: Any track
Car Used: BMW M6 GT3
Applicable Settings: Time Trial, online/offline race
Report: Cannot change from default setup. Will revert back even if you save it under another name and unable to even see/load the setup saved. Akin to default setup option online selected by the server.
Steps to reproduce: Does it repeatably. It is possible to change tyre compound if you save the setup but then the setup is not accessible.

Edit: Exactly the same issue with the Porsche GT4, Camaro GT4, Sprint, Stock Car Brasil.

 

Game version: 1.0.6.0
Track & Layout Used: Nordschleife
Car Used: All GT3'S, Retro, Vintage
Applicable Settings: Time Trial
Report: Will not save ghost lap.
Steps to reproduce: Will save ghost lap on any other track apart from Nordschleife.

 

Game version: 1.0.6.0
Track & Layout Used: Any
Car Used: GT3 Porsche, Porsche Cup
Applicable Settings: Time Trial/TS-PC racer wheel, T3PA pedals
Report: Randomly on restarting a session the force feedback completely turns off. Have to restart the sim to regain FF.
Steps to reproduce: Restart session

 

To add, one can really see it when monitoring someone driving those cars from pits using cockpit camera.

 

Game version: 1.060
Track & Layout Used: Brands Hatch (happens on all tracks and layouts in single player)
Car Used: BMW Procar (happen with all cars in single player)
Applicable Settings: All game settings on authentic including tire wear
Report: Tire temp HUD starts and stays green instead of starting blue and getting greener as temps increase
Steps to reproduce: Select single player AI race at any time of day including coldest part of day (4am.) Tires start warm and grip doesn't change as it should when the tires heat up after a couple laps.

 

Problem also occurred in my case with the Bmw M6 GT3

 

Game version: 1.0.6.0
Track & Layout Used: Any
Car Used: GT4 Ginetta G55
Applicable Settings: Time Trial / (Other race types not tested)
Report: ABS is set to 500% when using default setup
Steps to reproduce: Time Trial -> Ginetta G55 GT4 -> Setup -> Select Default setup

 

The problem is that not even at 500% ABS is not working nor the TC in any race type!