Fanatec McLaren GT3 V2 button invalid

You need to go into the options where you can set your keys, and setup your wheel axis and pedals again

 

Ahhhhhh, ok.
I will tray as soon as I get home, thank you
But the calibration procedure that I do is correct? Do I have to turn the wheel all the way to the end in the first step and rotate only 90° in the second step?

 

That is correct. - As i said earlier, i had to do the same steps to get my Fanatec 2.5 and Simagic pedals to work

 

You could also rotate wheel to read 900 or 1080 degrees I believe, that should give you 90.

 

Rebind is button mapping. You set up each button in the control settings again.

 

So, if I rebind the controls, I can calibrate the wheel and the pedals, but there is no way to calibrate correctly the wheel. I tried every possible combination of degree rotation of the wheel but the real wheel is never in sync with the simulated one.

 

Do you have sensitivity set to auto in fanatec driver?

 

Tes, sensivity is in auto mode

 

Won't get to wheel till tomorrow but I'll try configure via custom myself as I have pretty much same setup

 

Thank you very much.

 

Worked for me. Csl Dd 8nm/ McLaren v2.
Turned wheel right to 100. Keep holding wheel, save, still holding wheel. Turned left to read 1080, save.
I'm sure you do, but make sure wheel is levelled at 0 degrees before you start.
Let us know if this works

 

Ok, now the calibration works for me too. Thank you very much for the help!

 

Glad you got it sorted

 

I can't navigate the AMS2 menu using the key 5 shown in the photo on the first page. Do you know if it's possible to do so, or do you have to use the mouse only?
Thanks