[SOLUTION] Wheel not working? Try this first.

Discussion in 'Automobilista 2 - Help & Support' started by Marius H, Dec 10, 2024.

  1. Dave H

    Dave H New Member

    Joined:
    Jun 20, 2026
    Messages:
    7
    Likes Received:
    0
    Marius,

    I'll have to get a powered USB hub to connect the pedals via USB. I'm using a 9m active USB cable to connect to the PC as they are not near each other. When I run SimPro (Simagic software) everything shows up fine.

    In the meantime I'll try the Generic DD and Legacy and get back. Thank you for your help, this has become quite frustrating.

    ----

    Trying Generic DD shows N/A for pedals. Legacy allows me to select axis for the wheel but am not able to select axes for the pedals. Could be the Canbus connection to the wheelbase but regardless i had no steering under legacy in a Test Day scenario.

    ----

    Marius,

    Through a USB hub I was able connect the pedals via USB. I was then able to configure and calibrate them in AMS 2 under both Generic DD and Legacy wheel selections however none of that changed the result which is no response under a Test Day session.
     
    Last edited by a moderator: Jun 20, 2026
    • Friendly Friendly x 1
  2. Marius H

    Marius H Forum moderator Staff Member AMS2 Club Member

    Joined:
    Mar 24, 2016
    Messages:
    7,743
    Likes Received:
    4,357
    Hello,

    Sounds incredible frustrating as it's weird that the wheel and pedals do not work when you go on the track. Can you try or check if your Steam input is disabled. Right click on AMS2 > Properties > Controller > Turn off Steam Input. Then boot up the game and try again.

    As well, I don't have a Simagic wheelbase, etc, so I also advice to join Simagic DC or the forum, if they have any, and ask / seach for similar issues. Likely someone had the same problem and found a solution.

    Marius
     
  3. Dave H

    Dave H New Member

    Joined:
    Jun 20, 2026
    Messages:
    7
    Likes Received:
    0
    Marius,

    I have previously turned off the Steam Input on the advice of AI. I will also take your advice and try Simagic specific forums and see if this may be specific to AMS2.

    Thank you for your input.
     
  4. Marius H

    Marius H Forum moderator Staff Member AMS2 Club Member

    Joined:
    Mar 24, 2016
    Messages:
    7,743
    Likes Received:
    4,357
    Does Simagic have a PS5 or PC-mode? Perhaps you are in PS5 mode, and you have to switch to PC-mode.

    Also try Raceweekewnd, or/and make sure the car is ignited.
     
  5. Dave H

    Dave H New Member

    Joined:
    Jun 20, 2026
    Messages:
    7
    Likes Received:
    0
    No, the Alpha EVO Pro does not work with consoles, only PC so there is no selection. I'll have to try a different sim and see if I have the same issue.
     
  6. Marius H

    Marius H Forum moderator Staff Member AMS2 Club Member

    Joined:
    Mar 24, 2016
    Messages:
    7,743
    Likes Received:
    4,357
    Totally forgot to suggest. Try that, and report back. Maybe we're missing something that's obvious. Every PC is different. I've asked a friend, whom owns a Simagic as well, if he sees what we're missing, and thus, you can try.
     
  7. Dave H

    Dave H New Member

    Joined:
    Jun 20, 2026
    Messages:
    7
    Likes Received:
    0
    Thank you Marius.
     
    • Friendly Friendly x 1
  8. GCAdventure

    GCAdventure New Member

    Joined:
    Jul 30, 2025
    Messages:
    1
    Likes Received:
    1
    Thanks a bunch. I was able to configure it back in the game. I'm again a happy racer!
     
    • Like Like x 1
  9. Dave H

    Dave H New Member

    Joined:
    Jun 20, 2026
    Messages:
    7
    Likes Received:
    0
    Marius,

    I apologize for not replying sooner. After many repeated attempts to get the game to recognize the calibration, it eventually was detected. I now do get responses from the wheel and pedals and can run the sim. I wish that I could say what I did differently to get it to work but sadly I have no idea. Thanks again for your assistance.
     
    • Friendly Friendly x 1
  10. MrJack

    MrJack New Member AMS2 Club Member

    Joined:
    Mar 8, 2016
    Messages:
    9
    Likes Received:
    1
    Hi everyone,
    Since the last update, my brake pedal is no longer recognized. It’s only the brake pedal—everything else works perfectly, but I just can't assign it anymore.
    Here is what I've already tried:
    Resetting to default settings.
    Deleting the controller configuration file in the AMS2 documents folder.
    Disabling Steam Input ("Turn off Steam Input").
    Switching between a custom profile and pre-configured wheel profiles.
    None of this worked. I should note that the pedal works perfectly fine in all other games. It’s a custom hydraulic pedal set, so it’s not listed among the commercial brands/models. It has always worked flawlessly in AMS2 until now.

    I'm out of ideas. What else can I try to fix this?
    Thanks in advance!
     

Share This Page