Automobilista 2 Custom Force Feedback - Overview & Recommendations

FullFFB - New Version​

What's new:

• Improved weight transfer algorithm
• Improved brake and general front suspension feel
• Improved surface transitions algorithm
• Parameter change in car rotation counter-action
• Parameter change in rear suspension
• (please, read the notes - very important to achieve more pleasure and less pain...)

Still to improve/implement:

• (no roadmap)

 

Have you got some recommendations for simagic alpha mini simpro2 manager? And in game settings?

 

It's all in the notes .
Nobody knows what it feels like to you. Try to reset your wheel base settings but don't stop there! Try to understand what each setting does and adjust accordingly to your own tastes.

 

Something was not right on my system, after recovering windows to a backup image all is working properly now. Except button 5 on my F1 wheel is stuck on and it was assigned to rear view.
I couldn't see where I was going. Reassigned it to another button and I can see where I'm going now.

master_rack 0.60 and all is good.
Cheers

 

I've noticed since the moza update that when the front wheels regain grip after over enthusiastic braking/understeer there is a little jolt on the wheel which feels so good. Anyone else notice it?
Not been playing much lately so it may be my imagination but can't remember it happening before.

 

@Danielkart can I be a Little cheeky asking what each value of the ffb files change? I'm talking about all of them but at least the master ones, I only know what velocity resistance scale does, but I'm interested in knowing what the others do to customise to my liking the ffb file. It would be very much appreciated.

These are taken directly from your files
(power_steering_angle 0.00)
(tyre_initial_resist 4.3)
(tyre_resistance1_timing 0.000)
(tyre_resistance1_lo_df 1.00)
(tyre_resistance1_hi_df 1.00)
(rack_friction (* damping 0.70))
(lfb_slider_strength 0.98)
(center_full (blend (min 1.00 (* lfb_slider 12)) 1.0 0.0))
(over_steer_scale 2.90)
(under_steer_scale 2.05)
(exaggerate_front_load_feel 1.80)
(exaggerate_front_load_feel_hi_df 1.80)
(limit_high_df 1.0)
(velocity_res_scale 0.62)
(velocity_res_offset 0.55)
(vel_rot_scale 1.00)
(vel_rot_limit_coef 1.42)
(static_force_reduction_timing 1.90)
(normal_static_force_reduction 0.00)
#(exp_static_force_reduction 0.00)
#(exp_static_force_reduction_hi_df 0.00)
(yaw_scale 0.0)
(yaw_stretch_front 0.0)
(yaw_stretch_rear 0.0)
#(relax_yaw_line2_start_y 0.0000)
#(relax_yaw_pos 0.0011)
#(relax_yaw_width 0.00263)
#(relax_yaw_coef 0.00)
#(slip_crossover_pos 0.00)
#(slip_crossover_width 0.00)
#(slip_crossover_line1_slope 0.00)
(slip_crossover_line2_start_y 0.12)
(slip_crossover_line2_end_y 1.10)
(subtract_rot_velocity (* damping 2))
(accel_feel 0.00)
(brake_feel 2.10)
(yaw_feel 0.00)
(front_drive_torque_feel 0.20)
(rear_drive_torque_feel 0.0)
(front_tyre_stretch_feel 0.2)
(rear_tyre_stretch_feel 0.2)
(relax_os_line2_start_y 0.0000)
(relax_os_pos 0.0012)
(relax_os_width 0.00263)
(relax_os_coef 0.00)
(relax_us_line2_start_y 0.0000)
(relax_us_pos 0.0011)
(relax_us_width 0.00263)
(relax_us_coef 0.00)
(bump_feel_follow_weight 0.50)
(brake_feel_follow_weight 1.25)
(accel_feel_follow_weight 3.80)
(brake_coef 1.18)
(centering 0.46)
(on_off_throttle_feel 0.0)
(tear_threshold 0.15)
(scrub_threshold 0.05)
(road_rolling_slip_feel 1)
(front_grip_loss_feel 0.00)
(rear_grip_loss_feel 0.00)


###########################################################
#
# Road features settings
#

(texture_scale 0.5)
(micro_bumps_scale 0.60)
(micro_bumps_smooth 0.02)
(kerbs_surface_scale 9.0)
(kerbs_surface_smooth 0.012)
(kerb_bump_scale 3.40)
(large_track_bump_scale 1.25)
(large_offroad_bump_scale 4.2)

 

Hello buddy! I have currently installed the Simucube2 because there was also an FFB update with the reconstruction filter V2, which I also stated in the base recommendations of the latest file. To be honest, I haven't tested the Moza R21 yet with the new FFB 3.0 algorithm. That's why I can't confirm anything you think you feel. When I know more I will contact you

 

Good morning!
The creator of the original file is Karsten Hvidberg. Download a file from him, there is much more information about the individual values. I deliberately deleted this information because I changed, expanded, deleted or rearranged my files extremely. Nothing works here as it was originally intended, except for a few values. Changing a value can mean that a lot of other things are changed, making things bad and causing a lot of anomalies. That's why it's actually impossible to give you an operating manual for it. If you still want to get into this world of customs, I recommend taking less modified files from other people or, ideally, from Karsten. This will give you the opportunity to create your own personalized FFB according to your taste. These options are great for anyone who is not satisfied with the defaults

 

Thank you very much I will have a look into it just to see if I can enhance some effects to my liking

 

Small hint: Please also check your steering setting.It should be set to 900 degrees in the base, if you reduce it the forces will increase extremely. In addition, the oscillations are also increased when they go below 900 degrees

 

I did update with a post just a bit further up 6 posts up

Will be tweeking a bit later, there's more than one way to skin a...

 

I join the request. Any news on ATMOS 1.6??

 

+1 ...... by the way the creator in his signature already mentions version 1.6.x, , so I think it's already available. Regardless of the speculations, if I'm not mistaken, the author had already made it clear that we'll see it when the game comes out in its final version.

I remain very curious, does @Stakanov or your clan have information about it?

 

AFAIK he hasn’t released the version which is for the update which will be to the public

 

No guys, we also have no information about the alleged ATMOS 1.6.x version, so it will have been developed by Stakanov alone and is probably waiting for release after the game update.

I take this opportunity to say a quick hello to the forum users and I also hope, if possible, for an early release of the new ATMOS, from what I understand the physics of the game on beta 1.6 is well underway and having those who can enjoy the beta, do a preventive test, would not be a bad idea.

 

That’s what I want to do, help out

 

Hi guys!

After a short time I will post you the Custom File V6000 Extreme2. These files are the fine-tuning of the previously posted V6000 Extreme. You can read the additional improvements further down in the changelog, everything else remains as before. The files work great for me (no beta access) and also for people with beta access. Even with the definitive update 1.6, I don't think this will change much. I also try to give you very precise recommendations for the in-game settings and base settings, so that you get as much feedback as possible, but as little clipping and anomalies as possible. The goal is to adapt your base and your in-game settings as perfectly as possible to the V6000 Extreme2 file and to use the potential of your base as much as possible. However, I would like to point out that these recommendations of mine do not automatically have to work for previous files of mine or other files or Reizas defaults.


Changes and improvements V6000 Extreme2:

1. The brake balance and feel have been adjusted
2. When braking hard, there are no jerky movements of the steering axle and no strong swinging of the wheel
3. The brake jitter during hard braking has been increased and is now better felt in the wheel
4. The back pressure during braking has been reduced, which was too great, especially in GT3/GT4/GT5 and FWD cars
5. Tyre slip has been adjusted
6. Extreme new grip level to be felt, this creates a great stability until the final grip loss of the cars (no floating cars to be felt)
7. The different curbs and the road feedback have been adjusted. Curbs can now be felt that were not felt by me in previous versions. A very immersive experience on the curbs
8. Static force regulation (for dd bases) is now better integrated into the V6000 extreme2 without any other anomalies. This means that the high forces at slow speeds and in slow corners could be reduced without losing punch or too much other feedback. Struggling less with the wheel means you feel more fine details. dd bases that do not have a static force reduction will now also benefit from this
9. The sliding of the cars has been reduced by the fantastic tire grip
10. The "Flatspot" has been adjusted in both files
11. No wild swaying of the wheel, could be slightly reduced again (in my opinion, it doesn't belong in any simulation)
12. The self-alignment of the steering axle to the zero position when accelerating has been increased on FWD cars and all rally cars ( Dirt Cars / KART CROSS Cars / RX Cars)
13. Adjusted in-game settings and adjusted base settings in both files (dd bases and strap bases)
14. New strap bases added in the 2nd file. So-called hybrid bases, a combination of belt drive and gear drive
15. The in-game value (LFB) has been tried to be integrated into the strap file. There is now no longer a need for (LFB) even for weak belt bases, because this value more disadvantages than advantages. This does not have to apply to pure gear bases like Logitech, here it can still be advantageous to use (LFB)

16. (For V6000 Extreme2) The difference between the front axle and the rear axle can now be felt in even more detail
17. (For V6000 Extreme2) Even less slipping of the cars
18. (For V6000 Extreme2) The high grip level and the stability of the cars could be increased again
19. (for V6000 Extreme2) Adjusted in-game settings and adjusted base settings


The 1st file is only for dd bases and was adapted and tested with a Simucube 2 Pro and a Moza R21 V2 :

Optimized for Simucube 2 Pro (25Nm) (My Reference Base)
Optimized for Simucube 2 Sport (17Nm)
Optimized for Moza R21 V2 (21Nm) (My 2nd Base)
Optimized for Moza R16 V2 (16Nm)
Optimized for Moza R12 V2 (12Nm)
Optimized for Moza R 9 V2 (9Nm)
Optimized for Fanatec Podium DD1 (20Nm) (My Former Base)
Optimized for Fanatec Podium DD2 (25Nm)
Optimized for Fanatec CSL DD Base (8Nm)
Optimized for Simagic Alpha Mini (10Nm)
Optimized for Simagic Alpha (15Nm)
Optimized for Simagic Ultimate (23Nm)
Optimized for Assetek Prima (12Nm)
Optimized for Assetek Forte (18Nm)
Optimized for Assetek Invicta (27Nm)
Optimized for VRS (20Nm)
Optimized for Cammus C15 (15Nm)
Optimized for Cammus C12 (12Nm)

The 2nd file is only for belt bases and hybrid bases and was adapted and tested with a Thrustmaster T300RS. It's crazy how these weak belt bases can still provide excellent feedback:

Optimized for Thrustmaster T128 (2Nm) (hybrid base)
Optimized for Thrustmaster T248 (3.5Nm) (Hybrid-Base)
Optimized for Thrustmaster T150 (2Nm) (Hybrid_Base)
Optimized for Thrustmaster T300RS (4Nm) (My tested base)
Optimized for Thrustmaster T500 (5Nm)
Optimized for Thrustmaster T-GT / T-GT II / TS-PC / TS-XW (6Nm)
Optimized for Fanatec CSL Elite 2.5 (6Nm)
Optimized for Fanatec CSW V2 (7Nm)


General information:
All these recommendations and suggestions and these 2 custom files are based on my personal taste and my interpretation of how FFB should feel with all the compromises
that a (simulation VS reality) entails. It is also based on my experiences with many different systems (bases and immersion hardware) and of course from nice guys based on their feedback, many thanks at this point to these guys. In addition, it should be very easy even for beginners who prefer a custom file, but don't feel like and have time to deal with FFB or all the complicated settings. Then just take the file for your base and set the recommended settings, that's it. Whether someone likes it or not is another subjective thing, if so it's good and if no it's good. There are enough other options with different customs or the defaults of Reiza so that everyone can find their preferred settings.

The bases are very different. DDs are fundamentally different from belt bases. The forces, processing and output of FFB , the rotation speeds , the torque slew rates ..... and much more. In my opinion, these many differences cannot be solved with only 1 custom file. That's why I have these 2nd files, because they are very specific and precisely tailored to the systems (bases). It doesn't help if you take the 2nd file with a dd base. It is important to take the file for your system (dds 1st file or strap base 2nd file) only in this way you can achieve the best feedback and only then will everything work together harmoniously and put a big grin on your face


Notes for advanced custom users:
Always use 100% vehicle-specific FFB for these V6000 Extreme2 files, otherwise you will change the file and clipping or losing FFB may occur. The most important slider for these 2 files is the IN-Game Value (FX). The recommended value should not be exceeded, otherwise clipping and other anomalies may occur. On the other hand, this value (FX) can be reduced at will to find your personal sweet spot. Especially interesting if someone is on the road with motion or butt kickers or VR or other immersion hardware and it can then lead to a sensory overload. I know people who then reduce it, I personally ride with the recommended FX values because I love to feel a lot in the wheel and thus in my hands, decide according to your personal taste. Finally, a recommendation from me: Reduce the throttle sensitivity and the brake sensitivity in the in-game settings, I have reduced both values from 50 to 0. Ams2 is the only simulation where I leave this linearity, but with it you achieve much more feeling on the brake and on the throttle and the dosage will be much more precise. Good examples are GT3 or GT1 or GroupC cars without ABS and TC, it will give you a great advantage to reduce the sensitivity . But enough of the words, it's time to play or rather it's time to simulate


I wish you a lot of fun and fast and intense laps with the V6000 Extreme2

1 File: Daniel's Custom File V6000 Extreme2 for dd bases
2 File: Daniel's Custom File V6000 Extreme2 for belts and hybrid bases

 

FullFFB - New Version​

What's new:

• New lateral G forces algorithm (implemented non linearity)
• Adjustements in many parameters (rack/effects ratio, fine details, front wheels velocity delta, weight transfer)
• (please, read the notes - very important to achieve more pleasure and less pain)

Still to improve/implement:

• (no roadmap)

 

My initial work is getting close to its final phase (even though it's still in beta until the game comes out) and the experimental phase is therefore over but since the files work well on the current version 1.5.6.3 and also on last beta 1.6.x, I don't see why not take advantage of some of your feedback now, as you hoped. This way I have a margin for correction only if necessary.

These are the last files 1.6.0 that will perhaps also be definitive:

ATMOS 1.6.0 Base
(Original rFuctor 5.0.1/5.0.1.3/5.0.1.4 with some adaptation and with code extended to all 4 wheels both in the rack and in the effects)

ATMOS 1.6.0 BaseEVO
(Atmos Base as above - Relax OS_US_YAW functions + the little implementations of other Reiza's base code and variables)

ATMOS 1.6.0 BaseEVO + Partial Old_D_raw
(Atmos BaseEVO as above + the implementation partial of the profile Default of Reiza's also called "Old_D_raw")

ATMOS 1.6.0 BaseEVO + Partial NDef_imm
(Atmos BaseEVO as above + the implementation partial of the profile Default+ of Reiza's also called "NDef_imm")


Changelog:
It will be published here later if necessary or if requested …...

------------------------------------------------------------

I have carried out the definition and corrections of this last file alone, the people who normally or occasionally help me with some tests have not tried it, therefore, if they have some feedback to deliver it will be appreciated ... here or if they prefer in private via messages, it does not matter.

I remind those who do not know the files, that the Reiza code implemented in these files draws on the values, on the variables and on the calculations of the rFuctor, therefore only the logic, the new codes and the new features implemented in the files are in Reiza key, but the calculations, the functioning of all aspects, the new features and the final output is totally rFuctor, being this is the heart and the base that calculates everything.

The files ATMOS are a neutral base that can be used by everyone as the original Reiza profiles, then, with the ATMOS that you will choose (to your taste), I recommend at the starrt wasting most of the time to finding the right values of the sliders in the game (and not dedicating time of tuning), so play, we are here to have fun.

As usual, regards the high range/DD, raise the GAIN to your liking, use (without excluding but not much) the necessary LFB cursor, use the DAMPING as much as necessary and trying to not reach either clipping or wrong oscillations with this 3 cursors, and finally raise FX to your liking,... the medium/low range on the other hand can also risk more a lot the use of the LFB and less the use of DAMPING slider.

In any case for the most demanding at the beginning of the file I inserted some simple recommended value ranges to first experiment with the cursors in the game .... only after and only if necessary modify the main_dials as desired, or, if you are confident with the modifications on the rFuctor files, go directly to modify the individual objects to your taste ... all explanatory notes and some alternative values are indicated within the individual files.

This are my final files (i don't think that the final public version 1.6 of game change more the rules compared to the current beta 1.6.x but only a little the sensations to the physics and tyres) but if necessary we fix with little adjustments that will be made after the release of the final version of the game.

This phase is just a milestone before a new phase of testing begins ... I hope you like it and as always I hope I haven't made any typing errors.

Good evening everyone.

 

Thank you so much i was waiting for this for a long time.