Logitech G29/G920/G27/G25 FFB Thread?

Couple of options:
- reduce the brake sensitivity in the settings to lower than 50%
- reduce brake pressure in the cars

 

Exactly.
In bold: It's just far from realistic to feel the centrifugal/ G Forces in the steering wheel. For me it feels so unnatural. But each to their own off course.

Cheers
Robin

 

15? Seriously?
I've got mine at 100% and it's still weak as hell compared to any other sim. I'm at a loss what to do here. If I try to drift a car and release the wheel to have the FFB help countersteer the way you do in AC, the wheel just slowly rorates back and isn't even halfway back when the car has spun out.
I can easily hold the wheel with two fingers and not lose grip through hard turns. If I drive an indycar in iracing with the same wheel I have to grip it firmly with both hands and still get tired arms after a while.

 

100 Gain will break my fingers/ pulse etcetera(not kidding), almost impossible to steer. So dunno what's the difference between our 920/settings.

Cheers
Robin

 

Just tested with your suggested settings thinking maybe I was missing something. But nope. with those settings I don't feel any force at all in the wheel. It's as if the FFB was turned off.

 

Could this be related:
It looks like the madness engine is changing registry values for G29

 

Tested that and nope. no difference for me.

 

Hey Ashaz,

I've got a G27, and whilst it's a different model to yours I had the same problem you're describing. It may not work for you but I'm now using Gain 100, LFB 15, FX 75 under the new default and find it pretty decent, at least until they update the FFB again.

See post #382 under the main force feedback thread for my whole post if you're interested.

Automobilista 2 Force Feedback - Overview & Recommendations

 

Have you tried running the profiler as administrator?

 

The new release seems to get along better with my DFGT. Was able adjust my FFB profile fairly quickly and just enjoy the time trials option. Used the custom profile option with no changes to a newly generated ffb_custom_settings.txt as it already has min_force enabled.

Tried a different approach using something close to the in game recommended settings then turning down overall effects strength in Profiler. This seemed to work well giving balanced FFB in the graph and a good weight to the wheel with less of the overly bumpy feedback while cornering.

overall effects strength 70
gain 85
LFB 40
FX 50

 

I'm really confused as to what's going on here.

I have a G27, fine in any other sim I've ever played, in this it's just flat out odd.

I have no feeling of understeer and when I oversteer I try to correct and I get an odd inverse force feeling and just have oscelating steering down the straight after. At any rate, the FFB is so light I can hardly feel it.

I have tried every setting of gain, LFB, FX & profile I can find. I am using the advised Profiler settings.

It was so odd I booted up ACC and rF2 to make sure my wheel wasn't broken.

 

Just tried the new patch with my G27 with gain 90, lfb 50, fx 15, on brands hatch short with the f3 and it felt just fine. I leave the strength in the driver always to 100% and tick Allow Game to Adjust Settings. I do use an older version of logitech drivers though (5.10 package), because I don't have the new wheels. I don't have LWEMon (the logitech profiler) running either. And I delete all the settings for the game before using a new patch.

 

Out of interest, how do you change the driver settings - is it via control panel, devices, game controller settings, properties, and settings, or some other way?

On mine, the above method, or changing the AMS2 profile has no impact on the game. Only running the profiler as administrator allows me to change the Strength.

Does it make any difference in-game if you change the Overall Effects Strength?

Trying to work out if this is a common issue or just for a few of us.

 

I use what you said to change the driver settings. I have to check that Overall Effects Strength later because I don't have my wheel with me atm.

Notice also that I have the 5.10 version of the driver, so something may have changed with it in the newer drivers.

See post It looks like the madness engine is changing registry values for G29 for my settings in the driver.

 

Have you had chance to see if you can adjust the feedback strength?

I'm on 5.10 lgs (I guess all g27 and earlier users are on this) and the driver is 5.9 in device manager even though the control panel states 5.10. I checked the install files for 5.10 and 5.9 is correct.

 

I never change the Overall Strength from 100% in the driver. I use gain in the game in this case. Some games might have another name for it. Changing gain in the game does not change the value in the driver. Changing the overall strength in the driver does change the ffb strength in the game.

 

Thanks. What I'm asking is if changing the driver setting does change the feedback in the game? It doesn't for me.

 

Hi. DFGT user here. The short answer is yes. Just tried to put the driver overall strength to 0 back in game had no force or strength on the wheeI Back to the driver power up to 120 and in game I could barely steer the wheel as to much power.

 

Thanks Massimo. Does your wheel rotation automatically change per car as well?

I either have rotation being set automatically and no ability to change strength OR rotation not being set and ability to change strength. Odd I know.

 

Yes, no problems changing cars the wheel feels and visually sync to the different cars steering wheels.
Silly question but have you tried uninstall the driver/profiler, clean up whit ccleaner see what happen.